STUDY ON MATHEMATICAL MODEL FOR MANUFACTURING BALL NOSE END MILL

›› 1994, Vol. 30 ›› Issue (5): 55-60.

• Article • Previous Articles Next Articles

STUDY ON MATHEMATICAL MODEL FOR MANUFACTURING BALL NOSE END MILL

Shi Peilin;Wang Wei;Tang Yuyong

Harbin Institute of Technology

Published:1994-09-01

Abstract

Abstract: This paper primarily introduce the principle of ball nose end mill forming, the solution model of the cutting edge, the optimization model of the relevant parameters of the cutting edge curve and the structure as well as corresponding mathematical model of the cutting edge after grinding. The reliability of the above models with actual examples is demonstrated. Finally, the influence of grinding wheel abrasion on cutting edge curve is also discussed.

Key words: Ball nose end mill, Cutting tools, Mathematical model

Shi Peilin;Wang Wei;Tang Yuyong. STUDY ON MATHEMATICAL MODEL FOR MANUFACTURING BALL NOSE END MILL[J]. , 1994, 30(5): 55-60.

[1]	LI Shouzhong, GUAN Yunyi, MA Chong, ZHAO Jianlong, ZHAO Hongzhe. Modeling and Experiment of Passive Variable Stiffness Actuator for Upper Limb Rehabilitation Robot [J]. Journal of Mechanical Engineering, 2024, 60(3): 47-54.
[2]	LI Hongzhu, WANG Zeming, FAN Longlong. Research on Current Ripple of Coupling Inductor in Magnetically Integrated Converter [J]. Journal of Electrical Engineering, 2023, 18(2): 97-107.
[3]	DONG Xinhong, SUN Pengwen, ZHANG Lanting, WANG Zongtao. Multi-objective Optimization of Ply Parameters for Wind Turbine Blade [J]. Journal of Mechanical Engineering, 2022, 58(4): 165-173.
[4]	MA Jing, ZHANG Mingjian, LIU Qiang, LIU Xianli, YUE Caixu, YANG Shaocheng. A Review of the Research Progress of Bionic Cutting Tools [J]. Journal of Mechanical Engineering, 2022, 58(13): 261-281.
[5]	LIU Qiang, ZHANG Haijun, LIU Xianli, GAO Dayong, ZHANG Mingjian. A Review of Research on Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2021, 57(21): 248-268.
[6]	ZHU Zhida, WANG Wenjun, KOU Haijiang, ZENG Li, DAI Min, ZHANG Fan. Research on Modeling and Simulation of Cooperative Control for Multi-degree-of-freedom Rotor System of Magnetic Bearing [J]. Journal of Mechanical Engineering, 2021, 57(17): 173-184.
[7]	ZHANG Qian, SHAN Zhongde, WU Le, WANG Shaozong, TIAN Yuan. Research and Application of Mathematical Model of Ship Sectional Multi-station Cooperative Manufacturing System [J]. Journal of Mechanical Engineering, 2020, 56(9): 191-198.
[8]	LEI Zheng, WANG Qiming, GAN Hengqian, ZHU Ming, JIANG Peng. Filtration System for Hydraulic Actuators of FAST [J]. Journal of Mechanical Engineering, 2020, 56(4): 218-223.
[9]	LIANG Zhiqiang, LI Shidi, ZHOU Tianfeng, GAO Peng, ZHANG Dongdong, WANG Xibin. Research on Grinding of Micro Ball End Mill with Equal Normal Rake Angle and Equal Radial Relief Angle [J]. Journal of Mechanical Engineering, 2019, 55(5): 196-203.
[10]	ZHENG Dazhou,ZENG Dong,LI Guanglei,LU Rui. Building and Simulation Research on the Electrical Model of DFIG [J]. Journal of Electrical Engineering, 2019, 14(3): 81-89.
[11]	PEI Lina,SUN Dongxu. Research on Dynamic Mathematical Model and Simulation of Wind Power Pitch Control System Based on Matlab Simulink [J]. Journal of Electrical Engineering, 2019, 14(2): 66-70.
[12]	Li Shan,Li Wei,Wu Biao,Zhang Yuan,Zhou Libing,Gong Duohu. Study of Analysis and Suppression on Grounding Circulation Current of 750 kV Transformer Π Grounding [J]. Journal of Electrical Engineering, 2018, 13(6): 36-41.
[13]	LIU Yi, WANG Deng, ZHENG Di. Pulse Wave Generation Method Using Rotary Valve Control [J]. Journal of Mechanical Engineering, 2018, 54(20): 279-286.
[14]	YUAN Jiayang, YIN Yaobao, LU Liang, FANG Xiang, GUO Shengrong. Analysis of Rotary Direct Drive Electro-hydraulic Pressure Control Servo Valve [J]. Journal of Mechanical Engineering, 2018, 54(16): 186-194.
[15]	YOU Yuan, LI Hongbo, XIA Chunyu, KONG Ning, ZHANG Jie, JIA Shenghui. Experimental and Mathematical Model Study of Attenuation Process of the Surface Roughness of Textured Work Rolls during Cold Rolling [J]. Journal of Mechanical Engineering, 2018, 54(12): 173-183.

STUDY ON MATHEMATICAL MODEL FOR MANUFACTURING BALL NOSE END MILL

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments