IN-SITU TEM STUDY ON THE EFFECT OF HYDROGEN ON THE DEFORMATION CRACK TIP AND CRACK PROPAGATION

[1]

JIANG Fei, ZHAO Shengdun, FAN Shuqin, WANG Kexin, CHEN Chao. Research on Symmetrical Rib Stripping and Rolling Composite Process and Its Equipment [J]. Journal of Mechanical Engineering, 2024, 60(8): 132-142.

[2]

LI Yiran, YAO Junping, LIANG Chaoqun, XIAO Peng, CHEN Guoxin, LI Buwei. Crack Initiation and Propagation Mechanism of SiC/AZ91D Composites During Uniaxial Tensile Process Based on Three-dimensional Microstructure [J]. Journal of Mechanical Engineering, 2024, 60(16): 160-170.

[3]

DENG Zhiming, HUANG Tudi, HUANG Hongzhong, WEI Xunkai, WANG Hao. Study on Load Spectrum of Evolution Accelerated Test for Fatigue Spalling of Angular Contact Ball Bearings under Varying Working Conditions [J]. Journal of Mechanical Engineering, 2024, 60(13): 193-204.

[4]

YAN Chunyan, ZHOU Qianwen, ZHANG Hao, JIANG Xinyi, YI Si, ZHANG Kezhao. Investigation of Hydrogen-induced Cracking Susceptibility of X90 Pipeline Steel Welded Joints [J]. Journal of Mechanical Engineering, 2023, 59(24): 83-94.

[5]

LI Xueying, REN Peng, PENG Xueyuan, JIA Xiaohan. Non-invasive Condition Monitoring Method and Fault Diagnosis System for Compressor in Hydrogen Refueling Station [J]. Journal of Mechanical Engineering, 2023, 59(22): 186-195.

[6]

CUI Xuexi, WAN Min, WU Xiangdong, GUAN Bobin, ZHOU Bingying. Method for Determining Localized Instability Based on Strain Evolution [J]. Journal of Mechanical Engineering, 2023, 59(22): 234-244.

[7]

YU Jian, GOU Baiyong, CHEN Guiyong, ZHANG Teng, MA Binlin, FAN Xianghong, CHEN Xin, WANG Yitao. Analysis of Fatigue Crack Growth Performance of Adhesive-rivet Hybrid Repaired Structure [J]. Journal of Mechanical Engineering, 2023, 59(22): 352-368.

[8]

LI Tao, HUANG Weiqi, LONG Gui, YANG Sishuo, ZHANG Jianguo, XIAO Junfeng, XU Jianfeng. Surface Topography Evolution of Single Crystal Silicon in Laser Polishing [J]. Journal of Mechanical Engineering, 2023, 59(21): 52-64.

[9]

HAN Xiao, SUN Liangliang, LIU Bo, LIU Zheyuan, WU Chengwei. Effect of Adhesive Thickness on the Mechanical Property of Adhesively Bonded Corrugated Structure under Three-point Bending Load [J]. Journal of Mechanical Engineering, 2023, 59(2): 104-112.

[10]

HAN Feng, ZHAO Xiaohang, SU Yulei, WANG Dongdong, YAN Yan, NI Zhonghua. Cryo-compressed Test System for Hydrogen Equipment Developing [J]. Journal of Mechanical Engineering, 2023, 59(16): 390-396.

[11]

ZHAO Anxin, ZHANG Zhisheng. Low-carbon Economic Dispatch of Integrated Energy System Considering Integrated Power Demand Response [J]. Journal of Electrical Engineering, 2022, 17(4): 226-232.

[12]

ZHOU Changjiang, WANG Haoye, JIN Guanghu, AI Yongshen. Calculation Method of Contact Fatigue Life of Spiral Bevel Gears Considering Residual Stress [J]. Journal of Mechanical Engineering, 2022, 58(23): 28-38.

[13]

CAI Wang, WANG Chunhui, SUN Chaoyang, MA Jinyao, LI Yuemin, JIANG Jun, ZHANG Yuefei. Investigation of Deformation Behavior of TWIP Steel Using Crystal Plasticity Coupling Temperature Effect [J]. Journal of Mechanical Engineering, 2022, 58(20): 283-293.

[14]

HAN Jianchao, YAO Haoming, JIA Yi, XIE Guangming, WANG Tao. Studying on High Temperature Plastic Deformation Behavior and Flow Softening of Novel Multiphase TiAl Alloy [J]. Journal of Mechanical Engineering, 2022, 58(16): 77-88.

[15]

CHEN Lin, DAI Yuheng, CUI Jianwei, ZHOU Qingfei, CEN Yaodong. Optimization of Quenching Process and Fatigue Crack Growth Behavior of Microalloyed Rail [J]. Journal of Mechanical Engineering, 2022, 58(14): 233-240.

Knowledge