• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 125-133.doi: 10.3901/JME.260955

Previous Articles    

Condition Monitoring Method for the Whole Lifecycle Evolution of Rolling Bearings Based on Data Dynamic Augmentation

KONG Detong1,2, ZHANG Mingrui1, LI Naipeng1, LUO Nanzhi1, ZHANG Leping1,2, LEI Yaguo1   

  1. 1. Key Laboratory of Education Ministry for Modern Design and Rotor-bearing System, Xi'an Jiaotong University, Xi'an 710049;
    2. China HuaDian Electric Power Research Institute Corporation Ltd., Hangzhou 310030
  • Received:2025-09-25 Revised:2026-06-30 Published:2026-11-20

Abstract: As a core component of rotating machinery, the health condition of rolling bearings is crucial to the safe operation of the entire system. To address the problem that fault features in monitoring signals are obscured and to enable real-time monitoring of the full-life evolution of rolling bearings, a condition monitoring method for the whole lifecycle evolution of rolling bearings based on data dynamic augmentation is proposed. In this method, a threshold function is employed to adaptively identify the informative components in the monitoring signals, so that the signal-to-noise ratio is improved. An impulsive feature extraction algorithm is then applied, in which the difference sequence and autocorrelation sequence of the monitoring signals are exploited to enhance the impulsive characteristics of the data. A dynamic activation function is further introduced into the feature mapping stage to optimize the output mechanism, allowing the nonlinear mapping relationship to be adaptively adjusted according to the input features and thereby alleviating the problem of incomplete feature extraction. Experimental results indicate that effective data enhancement is achieved, and the accuracy of whole lifecycle evolution monitoring for rolling bearings is significantly improved.

Key words: rolling bearing, whole lifecycle, condition monitoring, data dynamic augmentation

CLC Number: