• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 419-429.doi: 10.3901/JME.260725

Previous Articles    

Machine Vision Inspection Method for Dynamic Wheel-rail Displacement

YE Yunguang, WANG Jianji, LI Haoqian, LI Dadi, WEI Lai, ZENG Jing   

  1. State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu 610031
  • Received:2025-08-14 Revised:2026-02-19 Published:2026-10-14

Abstract: Dynamic wheel-rail displacement(DWRD) is a key physical quantity for measuring the interaction state of the wheel-rail system of railway vehicles, and its detection accuracy directly affects the reliability of train operation safety assessment and wheel-rail maintenance decision-making. Aiming at the problems of poor adaptability, insufficient accuracy or low real-time performance of existing optical detection technologies in complex operation scenarios, a fusion detection method of “auxiliary laser marking- lightweight deep learning-binocular camera 3D collaboration” is proposed. Firstly, a blue-violet single-line laser is used to construct high-contrast reference marks in the wheel-rail area, which solves the problem of blurred features of key wheel-rail points in traditional visual detection. Secondly, a two-stage lightweight network is designed based on the improved ShuffleNet v2 architecture to realize the rapid localization of the wheel-rail Region of interest(ROI) and the adaptive recognition of laser-wheel-rail intersection points respectively, which improves the computational efficiency while ensuring the detection accuracy. Finally, combined with the binocular camera 3D coordinate conversion model, the system errors caused by camera perspective offset and wheel set attitude change are eliminated, and the DWRD quantification is completed through time-series displacement calculation. To verify the effectiveness of the method, an engineering application study is carried out on a subway line. The results show that:the detection speed of the proposed method can reach 19 ms/frame, and the deviation rate between the measured value and the design value of rim width is less than 0.8%; the DWRD obtained based on this method can accurately identify the small-amplitude hunting instability of the vehicle at about 1 Hz, and can reflect the positive correlation characteristic between track curvature and DWRD amplitude. The research results can provide technical support for the assessment of hunting motion stability of railway vehicles, derailment risk early warning and intelligent maintenance of track status.

Key words: railway vehicle, dynamic wheel-rail displacement, machine vision, deep learning, binocular camera, hunting stability

CLC Number: