• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 438-444.doi: 10.3901/JME.260665

Previous Articles    

TFM Imaging and Quantitative Detection of Axial Cracks in Pipelines

JIN Shijie, SU Jiakai, LI Xiao, SHI Siqi, DI Chengjun, LUO Zhongbing   

  1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024
  • Received:2025-12-15 Revised:2026-05-13 Published:2026-11-20

Abstract: The ultrasonic total focusing method (TFM), featuring high resolution and excellent focusing performance, has been widely used to identify and quantify defects in plates. However, obvious refraction and divergence of ultrasonic waves during propagation are caused by the curved geometry when axial cracks in pipelines are detected. As a result, the conventional TFM imaging results exhibit position deviation, shape distortion, and increased quantitative errors in defect sizing. The travel times of array signals used for the delay-and-sum beamforming are corrected to realize the imaging characterization and accurate quantification of axial cracks by combining TFM principle and the divergence effects of pipeline curvature on ultrasonic beams. The simulated and experimental results show that the measurement errors of crack lengths, angles and central depths without considering pipeline curvature are respectively up to 25.11%, 27.35° and 13.33% for the axial cracks with 5 mm length, 12 mm central depth and 30° and 45° inclined angles in carbon steel pipeline with an out wall diameter of 110 mm. In contrast, the quantitative errors in TFM images of pipelines are within 11.59%, 6.75° and 3.13%, respectively. Finally, the influences of TFM detection position on the measurement errors of defect depths are theoretically analyzed, further demonstrating the effectiveness and necessity of the proposed method.

Key words: ultrasonic detection, total focusing method, pipeline, axial cracks, quantitative detection

CLC Number: