• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 425-437.doi: 10.3901/JME.260753

Previous Articles    

Design and Performance Study of Thermal Management System Coupling Sleeve and Hollow-notched Fins with Phase Change Material for Cylindrical Lithium-ion Batteries

WU Xiaolan, ZHAO Xingxin, BAI Zhifeng, YANG Naixing   

  1. School of Mechanical and Electrical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055
  • Received:2025-09-22 Revised:2026-05-09 Published:2026-11-20

Abstract: Phase change materials(PCMs) provide a highly promising solution for lithium-ion battery thermal management systems due to their ability to store and release latent heat. However, their inherently low thermal conductivity can cause heat dissipation lag and local latent heat saturation under high-load discharge conditions. To address this issue, a passive thermal management system that couples a sleeve and hollow-notched fins with PCM is proposed for cylindrical lithium-ion batteries. By implementing a differentiated hollowing strategy on the fins, the heat flow pathways and PCM distribution are optimized. Numerical simulation results demonstrate that the proposed design significantly enhances the system's heat dissipation efficiency while enabling lightweight construction. Under high-rate discharge conditions, the maximum battery pack temperature is reduced by 7.43 °C and the temperature difference between cells is kept to within 2 °C. When PCMs with different latent heat and thermal conductivity are used, the maximum temperature decreases by a further 0.87-3.81 °C compared with the baseline model. Furthermore, in thermal runaway scenarios, the surface temperature of the runaway cell decreases by 43%, and the peak temperature decrease rate increases by 59%.

Key words: lithium-ion battery, battery thermal management system, phase change material, fin structure

CLC Number: