• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (18): 445-453.doi: 10.3901/JME.260661

Previous Articles    

Research on Adaptive Wavefront Compensation Method for Addressed Ultrasonic Sensor Array

SONG Shoupeng, WANG Xinyue, XIANG Yunjie, SHEN Qichao   

  1. Department of Instrument Science and Engineering, Jiangsu University, Zhenjiang 212013
  • Received:2025-10-10 Revised:2026-05-06 Published:2026-11-20

Abstract: Precise control of the wavefront in ultrasonic transducer arrays constitutes a key technology for achieving electronic beam steering. Compared with traditional ultrasonic phased array wavefront control methods, addressing ultrasonic transducer arrays exhibit differences in array structure, control timing generation, and signal transmission pathways. The formation mechanism of plane wavefronts in addressing ultrasonic transducer array inspection systems is investigated, and influencing factors on wavefront performance are analyzed. A real-time phase measurement circuit was designed based on the time-to-digital converter (TDC) principle, while FPGA-based timing correction was implemented to achieve adaptive phase compensation for wavefront control. Comparative analysis of array beam directivity and wavefront quality before and after phase compensation demonstrated that the sidelobe level was reduced by 8.57-9.3 dB, and the root mean square error (RMSE), the quantitative metric for wavefront flatness, reached a minimum of 0.0104. Plane wave inspections at 0°, 15°, 30°, and 45° were conducted on an aluminum test block containing through-hole defect with a diameter of 4 mm (F 4 mm). Results showed that the signal-to-noise ratio of detection echoes improved by 1.36-2.72 dB after compensation.

Key words: ultrasonic inspection, addressing transducer array, wavefront, precise control, adaptive

CLC Number: