[1] STAUFER H. Laser hybrid welding in the automotive industry[J]. Welding Journal,2007,86(10):36-40.
[2] ROEPKE C,LIU S,KELLY S,et al. Hybrid laser arc welding process evaluation on DH36 and EH36 steel[J]. Welding Journal,2010,89(7):140-150.
[3] 宋丙文,刘双宇,刘凤德,等. 原位内生TiC对激光-电弧复合焊接高强钢接头组织和性能的影响[J]. 机械工程学报,2015,51(12):76-88. SONG Bingwen,LIU Shuangyu,LIU Fengde,et al. Effect of in situ TiC on microstructure and properties of the laser-arc hybrid welding joints of high strength steels[J]. Journal of Mechanical Engineering,2015,51(12):76-88.
[4] TURICHIN G,TSIBULSKIY I,KUZNETSOV M,et al. Influence of the gap width on the geometry of the welded joint in hybrid laser-arc welding[J]. Physics Procedia,2015,78:14-23.
[5] 崔博,张宏,刘佳,等. 保护气体对高氮钢焊接熔滴过渡模式和气孔缺陷的影响研究[J]. 机械工程学报,2017,53(22):87-94. CUI Bo,ZHANG Hong,LIU Jia,et al. Study on the impact of the shielding gas on the droplet transfer mode and blowhole defect of high nitrogen steel welding[J]. Journal of Mechanical Engineering,2017,53(22):87-94.
[6] CHO M H,FARSON D F. Simulation study of a hybrid process for the prevention of weld bead hump formation[J]. Welding Journal,2007,86(9):253-262.
[7] 高明,曾晓雁,胡乾午,等. 激光-电弧复合焊接咬边缺陷分析及抑制方法[J]. 焊接学报,2008,29(6):88-91+120. GAO Ming,ZENG Xiaoyan,HU Qianwu,et al. Mechanism and remedy of undercut formation during laser-arc hybrid welding[J]. Transactions of the China Welding Institution,2008,29(6):88-91,120.
[8] PAN Q,MIZUTANI M,KAWAHITO Y,et al. High power disk laser-metal active gas arc hybrid welding of thickhigh tensile strength steel plates[J]. Journal of Laser Applications,2016,28(1):012004.
[9] MUHAMMAD S,MⅡKKA K,NA S J,et al. Effect of leading and trailing torch configuration on mixing and fluid behavior of laser-gas metal arc hybrid welding[J]. Journal of Laser Applications,2017,29(4):042009.
[10] 刘双宇,宗士帅,刘凤德,等. 激光-MAG复合焊熔质分布与熔池流动特征[J]. 焊接学报,2013,34(1):17-20. LIU Shuangyu,ZONG Shishuai,LIU Fengde,et al. Mechanism and remedy of undercut formation during laser-arc hybrid welding[J]. Transactions of the China Welding Institution,2013,34(1):17-20.
[11] 赵琳,塚本进,荒金吾郎,等. 激光-电弧复合焊焊缝合金元素分布的研究[J]. 中国激光,2015,42(4):202-209. ZHAO Lin,TSUKAMOTO S,ARAKANE G,et al. Distribution of wire feeding elements in laser-arc hybrid welds[J]. Chinese Journal of Lasers,2015,42(4):202-209.
[12] 赵琳,塚本进,荒金吾郎,等. 激光-电弧复合焊接保护气体O2含量对焊缝均匀性和熔池流动的影响[J]. 中国激光,2015,42(6):122-128. ZHAO Lin,TSUKAMOTO S,ARAKANE G,et al. Influence of shielding oxygen content on weld homogeneity and fluid flow in laser-arc hybrid welding[J]. Transactions of the China Welding Institution,2015,42(6):122-128.
[13] ZHANG Z,WU C S. Effect of fluid flow in the weld pool on the numerical simulation accuracy of the thermal field in hybrid welding[J]. Journal of Manufacturing Processes,2015,20(4):215-223.
[14] 胥国祥,张卫卫,刘朋,等. 激光+GMAW复合热源焊熔池流体流动的数值分析[J]. 金属学报,2015,51(6):713-723. XU Guoxiang,ZHANG Weiwei,LIU Peng,et al. Numerical analysis of fluid flow in laser +GMAW hybrid welding[J]. Acta Metallurgica Sinica,2015,51(6):713-723.
[15] WANG L,CHEN J,WU C S,et al.Backward flowing molten metal in weld pool and its influence on humping bead in high-speed GMAW[J]. Journal of Materials Processing Technology,2016,237:342-350.
[16] ZONG R,CHEN J,WU C S,et al. Influence of shielding gas on undercutting formation in gas metal arc welding[J]. Journal of Materials Processing Technology,2016,234:169-176.
[17] 黄健康,孙天亮,樊丁,等. TIG焊熔池表面流动行为的研究[J]. 机械工程学报,2016,52(18):31-37. HUANG Jiankang,SUN Tianliang,FAN Ding,et al. Study on the surface flow behavior of TIG weld pool[J]. Journal of Mechanical Engineering,2016,52(18):31-37.
[18] ZHAO C X,RICHARDSON I M,KENJERES S,et al. A stereo vision method for tracking particle flow on the weld pool surface[J]. Journal of Applied Physics,2009,105(12):123104.
[19] MATSUNAWA A,KIM J D,SETO N,et al. Dynamics of keyhole and molten pool in laser welding[J]. Journal of Laser Applications,1998,10(6):247-254.
[20] GAO Z M,JIANG P,MI G Y,et al. Investigation on the weld bead profile transformation with the keyhole and molten pool dynamic behavior simulation in high power laser welding[J]. International Journal of Heat & Mass Transfer,2018,116:1304-1313.
[21] 森田善一郎,杨克努. 铁液与钢液的粘度[J]. 钢铁,1982(2):57-64. MORITA Z,ⅡDA T. Viscosity of molten iron and steel[J]. Iron Steel,1982(2):57-64.
[22] ZHANG W,HUA X M,LIAO W,et al. The effect of the welding direction on the plasma and metal transfer behavior of CO2 laser+GMAW-P hybrid welding processes[J]. Optics & Lasers in Engineering,2014,58(7):102-108.
[23] 罗键,贾昌申,王雅生,等. 外加纵向磁场GTAW焊接熔池流动机理[J]. 机械工程学报,2001,37(4):29-32. LUO Jian,JIA Changshen,WANG Yasheng,et al. Fluid flow of Ld10CS aluminum alloy weld pools in GTAW with longitudinal magnetic field controlling[J]. Chinese Journal of Mechanical Engineering,2001,37(4):29-32.
[24] 张拓,张宏,刘佳. 激光-电弧复合焊接数值模拟的热源模型[J]. 应用激光,2016(1):58-62. ZHANG Tuo,ZHANG Hong,LIU Jia. Laser-arc hybrid welding heat source model for numerical simulation[J]. Applied Laser,2016(1):58-62. |