[1] 张直明,张言羊,谢友柏,等. 滑动轴承的流体动力润滑理论[M]. 北京:高等教育出版社,1986. ZHANG Zhiming,ZHANG Yanyang,XIE Youbai,et al. Hydrodynamic lubrication theory of plain bearings[M]. Beijing:Higher Education Press,1986.
[2] LÜ Fangrui,JIAO Chunxiao,TA Na,et al. Mixed-lubrication analysis of misaligned bearing consideringturbulence[J]. Tribology International,2018,119:19-26.
[3] 宋智翔,刘莹,郭飞,等. 屏蔽式核主泵水润滑可倾瓦推力轴承推力盘的离心效应[J]. 机械工程学报,2018,54(1):127-135. SONG Zhixiang,LIU Ying,GUO Fei,et al. Influence of centrifugal deformation of thrust collar inwater-lubricated tilting-pad thrust bearings of nuclear canned pump[J]. Journal of Mechanical Engineering,2018,54(1):127-135.
[4] TAYLOR C M,DOWSON D. Turbulent lubrication theory-application to design[J]. Journal of Lubrication Technology,1974,96(1):36-46.
[5] CONSTANTINESCU V N. On turbulent lubrication[J]. Proceedings of the Institution of Mechanical Engineers,1959,173(1):881-900.
[6] NG C W,PAN C H T. A linearized turbulent lubrication theory[J]. Journal of Basic Engineering,1965,87(3):675-682.
[7] ELORD H G,NG C W. A theory for turbulent fluid films and its application to bearings[J]. Journal of Lubrication Technology,1967,89(3):346-362.
[8] HIRS G G. A bulk-flow theory for turbulence in lubricant films[J]. Journal of Lubrication Technology,1973,95(2):137-145.
[9] HASHIMOTO H,WADA S. Theoretical approach to turbulent lubrication problems including surface roughness effects[J]. Journal of Tribology,1989,111(1):17-22.
[10] HASHIMOTO H,MONGKOLWONGROJN M. Adiabatic approximate solution for static and dynamic characteristics of turbulent partial journal bearings with surface roughness[J]. Journal of Tribology,1994,116(4):672-680.
[11] HASHIMOTO H. Thermohydrodynamic analysis of high-speed journal bearings with surface roughness[J]. Journal of Tribology,1996,118(3):698-701.
[12] HASHIMOTO H. Surface roughness effects in high-speed hydrodynamic journal bearings[J]. Journal of Tribology,1997,119(4):776-780.
[13] CHRISTENSEN H. Stochastic models for hydrodynamiclubrication of rough surfaces[J]. Proceedings of the Institution of Mechanical Engineers,1969,184(1):1013-1026.
[14] 裘祖干. 非牛顿流体有限长粗糙轴承分析[J]. 应用力学学报,1992,9(1):16-21. QIU Zugan. Analysis of finite width rough journal bearing with non-Newtonian fluids[J]. Chinese Journal of Applied Mechanics,1992,9(2):16-21.
[15] 裘祖干,张长松. 动载径向粗糙轴承分析[J]. 内燃机学报,1993,11(2):159-164. QIU Zugan,ZHANG Changsong. Analysis of dynamically loaded rough journal bearing with finite width[J]. Transactions of CSICE,1993,11(2):159-164.
[16] KANE M,BOU-SAID B. Comparison of homogenization and direct techniques for the treatment of roughness in incompressible lubrication[J]. Journal of Tribology,2004,126(4):733-737.
[17] LAHMAR M,BOU-SAID B,TICHY J. The homogenization method of roughness analysis in turbulent lubrication[J]. Journal of Engineering Tribology,2013,227(10):1090-1100.
[18] WANG Xiaojing,ZHANG Zhiming,SUN Meili. A comparison of flow fields predicted by various turbulent lubrication models with existing measurements[J]. Journal of Tribology,2000,122(2):475-477.
[19] 张直明. 论紊流润滑理论中的Hirs法的理论基础[J]. 西安交通大学学报,1978,(4):25-28. ZHANG Zhiming. On the theoretical basis of the Hirs method in the theory of lubrication[J]. Journal of Xi'an Jiaotong University,1978,(4):25-28.
[20] PATIR N,CHENG H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. Journal of Lubrication Technology,1978,100(1):12-17. |