部分断面掘进机截割头截割性能研究

doi:10.3901/JME.2017.24.193

机械工程学报 ›› 2017, Vol. 53 ›› Issue (24): 193-200.doi: 10.3901/JME.2017.24.193

部分断面掘进机截割头截割性能研究

袁晓明^1,2,3, 邹易达^1,2, 蹤雪梅^1,2,3, 阎鹏^1,2, 张立杰^1,2

1. 燕山大学河北省重型机械流体动力传输与控制重点实验室秦皇岛 066004;
2. 燕山大学先进锻压成形技术与科学教育部重点实验室秦皇岛 066004;
3. 江苏徐州工程机械研究院徐州 221004

收稿日期:2017-07-19 修回日期:2017-10-28 发布日期:2017-12-20
通讯作者: 袁晓明(通信作者),男,1984年出生,博士。主要研究方向为离散元技术及应用、流体传动与控制。E-mail:xiaomingbingbing@163.com
基金资助:
国家重点研发计划课题资助项目（2016YFC0802901）。

Research on Cutting Performance of Cutting Header on Part-face Roadheader

YUAN Xiaoming^1,2,3, ZOU Yida^1,2, ZONG Xuemei^1,2,3, YAN Peng^1,2, ZHANG Lijie^1,2

1. Hebei Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Yanshan University, Qinhuangdao 066004;
2. Key Laboratory of Advanced Forging & Stamping Technology and Science, Ministry of Education of China, Yanshan University, Qinhuangdao 066004;
3. Jiangsu Xuzhou Construction Machinery Research Institute, Xuzhou 221004

Received:2017-07-19 Revised:2017-10-28 Published:2017-12-20

摘要/Abstract

摘要： 截割头是掘进机直接实现截割功能的关键部件，其设计在一定程度上直接决定了整机的性能。采用混凝土制作煤岩，对自制煤岩进行单轴压缩试验，确定其抗压强度和弹性模量。针对掘进机截割煤岩过程的复杂性，以部分断面掘进机截割头为研究对象，基于单轴压缩试验所确定的物理参数，利用动力学有限元软件LS-DYNA建立截割头截割煤岩过程仿真模型，探讨了截齿切削角和旋转角对截割载荷、载荷波动和截割比能耗的影响规律。由仿真结果可知，当截齿的切削角在48°~50°范围，旋转角在12°~16°范围时，截割头的截割能力较佳；将由试验确定的自制煤岩截割力矩时域曲线与仿真结果进行对比，验证了所建立的仿真模型的正确性。上述研究为部分断面掘进机截割头截割性能的改善提供了理论基础，同时为其他类型截割或切削问题的研究提供了理论借鉴。

关键词: 截割头, 截割性能, 掘进机, 切削角, 旋转角

Abstract: The cutting head is the main part employed by a roadheader for cutting, and its design directly determines the performance of a roadheader to some extent. The uniaxial compression experiment is carried out on the homogeneous coal rock made by the concrete, and then the compressive strength and elastic modulus of the coal rock are obtained. Aimed at the complexity of the process of cutting coal rock in a roadheader, the cutting head of a part-face tunnel machine is studied. Based on the physical parameters determined by the uniaxial compression experiment, the dynamic finite element software LS-DYNA is used to model the cutting head of the cutting machine, and then the effects of cutting angle and rotation angle on the cutting load, load fluctuation and specific energy are investigated. By the comparison between the time-domain curve of the cutting moment obtained from the homogeneous coal rock by experiment and the simulation results, and the simulation model is verified. The above research provides a theoretical basis for the improvement of the cutting performance of the cutting head of part of the roadheader, and provides a theoretical reference for the research of other types of cutting or cutting.

Key words: cutting angle, cutting header, cutting performance, roadheader, rotational angle

中图分类号:

TD421

袁晓明, 邹易达, 蹤雪梅, 阎鹏, 张立杰. 部分断面掘进机截割头截割性能研究[J]. 机械工程学报, 2017, 53(24): 193-200.

YUAN Xiaoming, ZOU Yida, ZONG Xuemei, YAN Peng, ZHANG Lijie. Research on Cutting Performance of Cutting Header on Part-face Roadheader[J]. Journal of Mechanical Engineering, 2017, 53(24): 193-200.

参考文献

[1] 刘建琴, 刘蒙蒙, 郭伟. 硬岩掘进机盘型滚刀回转破岩仿真研究[J]. 机械工程学报, 2015, 51(9):199-205. LIU Jianqin, LIU Mengmeng, GUO Wei. Research on the simulation of cutting rock rotary by hard rock tunnel boring machine disc cutters[J]. Journal of Mechanical Engineering, 2015, 51(9):199-205.
[2] 周思阳, 亢一澜, 苏翠侠, 等. 基于力学分析的TBM掘进总推力预测模型研究[J]. 机械工程学报, 2016, 52(20):76-82. ZHOU Siyang, KANG Yilan, SU Cuixia, et al. Prediction of thrust force requirements for TBMs based on mechanical analysis[J]. Journal of Mechanical Engineering, 2016, 52(20):76-82.
[3] EYYUBOGLU E M, BOLUKBASI N. Effects of circumferential pick spacing on boom type roadheader cutting head performance[J]. Tunnelling & Underground Space Technology, 2005, 20(5):418-425.
[4] HEKIMOGLU O Z, FOWELL R J. Theoretical and practical aspects of circumferential pick spacing on boom tunnelling machine cutting heads[J]. Mining Science & Technology, 1991, 13(3):257-270.
[5] HEKIMOGLUO Z, OZDEMIR L. Effect of angle of wrap on cutting performance of drum shearers and continuous miners[J]. Transactions of the Institution of Mining & Metallurgy, 2004, 113(2):118-122.
[6] ACAROGLU O, ERGIN H. A new method to evaluate roadheader operational stability[J]. Tunnelling & Underground Space Technology, 2006, 21(2):172-179.
[7] ACAROGLU O, ERGIN H, ESKIKAYA S. Analytical hierarchy process for selection of roadheaders[J]. Journal of the Southern African Institute of Mining & Metallurgy, 2006, 106(8):569-575.
[8] DOGRUOZ C, BOLUKBASI N. Effect of cutting tool blunting on the performances of various mechanical excavators used in low-and medium-strength rocks[J]. Bulletin of Engineering Geology & the Environment, 2013, 73(3):781-789.
[9] RESTNER U, PICHLER J, REUMUELLER B. New technologies extend the range of applications of roadheaders[C/CD]//Symposium on Innovations in Tunnelling, Swiss Federal Institute of Technology Zurich, 2007.
[10] SU O, AKCIN N A. Numerical simulation of rock cutting using the discrete element method[J]. International Journal of Rock Mechanics & Mining Sciences, 2011, 48(3):434-442.
[11] GRIMA M A, MIEDEMA S A, KETTERIJ R G V D, et al. Effect of high hyperbaric pressure on rock cutting process[J]. Engineering Geology, 2015, 196:24-36.
[12] DEWANGAN S, CHATTOPADHYAYA S. Performance analysis of two different conical Picks used in linear cutting operation of coal[J]. Arabian Journal for Science & Engineering, 2016, 41(1):1-17.
[13] CHOI S O, LEE S J. Three-dimensional numerical analysis of the rock-cutting behavior of a disc cutter using particle flow code[J]. Ksce Journal of Civil Engineering, 2015, 19(4):1129-1138.
[14] WYK G V, ELS D N J, AKDOGAN G, et al. Discrete element simulation of tribological interactions in rock cutting[J]. International Journal of Rock Mechanics & Mining Sciences, 2014, 65(1):8-19.
[15] MENEZES P L, LOVELL M R, AVDEEV I V, et al. Studies on the formation of discontinuous chips during rock cutting using an explicit finite element model[J]. International Journal of Advanced Manufacturing Technology, 2014, 70(1-4):635-648.
[16] 李晓豁. 掘进机截割的关键技术研究[M]. 北京:机械工业出版社, 2008. LI Xiaohuo. Research on key technologies of roadheader cutting[M]. Beijing:China Machine Press, 2008.
[17] 付林, 杜长龙, 刘送永, 等. 螺旋钻采煤机钻头截齿载荷特性研究[J]. 中国机械工程, 2013, 24(15):2020-2024. FU Lin, DU Changlong, LIU Songyong, et, al. Research on load characteristics of picks on auger drill miner's aiguille[J]. China Mechanical Engineering, 2013, 24(15):2020-2024.

部分断面掘进机截割头截割性能研究

Research on Cutting Performance of Cutting Header on Part-face Roadheader

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

本文评价

[1]	王福吉, 王东, 殷俊伟, 杨帆, 赵猛, 王泽刚. CFRP复合材料铣削表层损伤形成机制分析[J]. 机械工程学报, 2019, 55(13): 195-204.
[2]	唐清春, 尹韶辉, 王永强, 张健. 非模态回转轴旋转角的优化方法[J]. 机械工程学报, 2018, 54(3): 178-185.
[3]	夏毅敏, 林赉贶, 贺飞, 吴遁, 李正光, 暨智勇. 盘形滚刀刀圈结构地质适应性设计方法[J]. 机械工程学报, 2018, 54(1): 10-17.
[4]	邵诚俊, 廖建峰, 刘之涛, 苏宏业. 基于自适应鲁棒控制算法的硬岩隧道掘进机水平方向轨迹纠偏控制[J]. 机械工程学报, 2018, 54(1): 113-119.
[5]	林赉贶, 夏毅敏, 贾连辉, 吴遁, 沈斌, 张旭辉. TBM边缘滚刀组合破岩特性及其影响因素敏感性评价[J]. 机械工程学报, 2018, 54(1): 18-26.
[6]	耿麒, 魏正英, 任军辉. 基于能量法的TBM滚刀磨损机理分析研究[J]. 机械工程学报, 2018, 54(1): 36-43.
[7]	姜兴宇, 高超, 高伟贤, 苏鹏程, 赵海峰. 基于库仑-莫尔准则的盘形滚刀破岩力预测研究^*[J]. 机械工程学报, 2016, 52(20): 126-136.
[8]	刘建琴, 刘蒙蒙, 郭伟. 硬岩掘进机盘型滚刀回转破岩仿真研究[J]. 机械工程学报, 2015, 51(9): 199-205.
[9]	耿麒;魏正英;杜军;卢秉恒. 基于灰关联分析的全断面岩石掘进机滚刀布局优化方法[J]. , 2014, 50(21): 45-53.
[10]	谢海波;洪啸;赵阳;刘志斌;杨华勇. 液体黏性离合器在全断面硬岩掘进机刀盘驱动中的运用[J]. , 2014, 50(21): 69-75.
[11]	霍军周;孙伟;欧阳湘宇;虞诗强;张旭. 隧道掘进机刀群与盘体支撑筋耦合布置设计[J]. , 2014, 50(21): 23-30.
[12]	王贵林;朱登超;戴一帆. 复杂光学表面的快刀伺服加工特性与路径规划[J]. , 2011, 47(15): 175-180.
[13]	刘志杰;史彦军;滕弘飞. 基于实例推理的全断面岩石隧道掘进机刀盘主参数设计方法[J]. , 2010, 46(3): 158-164.
[14]	黄民;吴淼;魏任之;王建军;安伟. 横切割头掘进机械振动特性研究[J]. , 2002, 38(8): 89-93.