面向典型制造企业的新一代国产高端智能ERP工业软件研究

doi:10.3901/JME.260587

机械工程学报 ›› 2026, Vol. 62 ›› Issue (11): 30-47.doi: 10.3901/JME.260587

• 特邀专栏：制造互联与工业智能 • 上一篇

扫码分享

面向典型制造企业的新一代国产高端智能ERP工业软件研究

刘志鑫¹, 冯毅雄^1,2, 王奕³, 靳海³, 胡炳涛¹, 张玉久³, 王娟³, 卢成宇¹, 娄山河¹, 李培⁴, 谭建荣¹

1. 浙江大学流体动力与机电系统国家重点实验室杭州 310027;
2. 贵州大学机械工程学院贵阳 550025;
3. 上海宝信软件股份有限公司上海 201900;
4. 港投工程咨询有限公司青岛 266000

收稿日期:2025-06-07 修回日期:2025-10-20 发布日期:2026-07-29
作者简介:刘志鑫,男,2000年出生,博士研究生。主要研究方向为领域知识管控、认知概念设计方法。E-mail:12225047@zju.edu.cn;冯毅雄(通信作者),男,1975年出生,博士,教授,博士研究生导师。主要研究方向为企业资源规划、现代设计理论与方法。E-mail:fyxtv@zju.edu.cn;王奕,女,1972年出生,硕士,高级工程师。主要研究方向为工业互联网和智慧物流。E-mail:wangyi@baosight.com;靳海,男,1975年出生,硕士,高级工程师。主要研究方向为企业营销管理和物流供应链。E-mail:jinhai@baosight.com;胡炳涛,男,1992年出生,博士,副研究员。主要研究方向为产品设计理论与智能制造。E-mail:hubingtao@zju.edu.cn;张玉久,男,1980年出生,硕士。主要研究方向为企业工业软件运维。E-mail:zhangyujiu@baosight.com;王娟,女,1982年出生,学士,高级工程师。主要研究方向为企业信息化和智慧管理。E-mail:wangjuan@baosight.com;卢成宇,男,1999年出生,博士研究生。主要研究方向为复杂产品稳健性优化设计。E-mail:12225099@zju.edu.cn;娄山河,男,1993年出生,博士,博士后。主要研究方向为机械产品概念设计、设计认知。E-mail:loushanhe@zju.edu.cn;李培,女,1992年出生,专科。主要研究方向为工程管理,数字运维。E-mail:1033740348@qq.com;谭建荣,男,1954年出生,博士,教授,博士研究生导师,中国工程院院士。主要研究方向为CAX方法学、工程图学、企业信息化。E-mail:egi@zju.edu.cn
基金资助:
国家重点研发计划(2024YFB3311500)和浙江省重点研发计划(2024C01029,2025C01088)资助项目。

New-generation Domestic High-end Intelligent ERP Industrial Software for Typical Manufacturing Enterprise

LIU Zhixin¹, FENG Yixiong^1,2, WANG Yi³, JIN Hai³, HU Bingtao¹, ZHANG Yujiu³, WANG Juan³, LU Chengyu¹, LOU Shanhe¹, LI Pei⁴, TAN Jianrong¹

1. State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027;
2. School of Mechanical Engineering, Guizhou University, Guiyang 550025;
3. Shanghai Baosight Software Co., Ltd., Shanghai 201900;
4. Hong Kong Investment Engineering Consulting Co., Ltd, Qingdao 266000

Received:2025-06-07 Revised:2025-10-20 Published:2026-07-29

摘要/Abstract

摘要： 在总结钢铁、矿山等典型制造企业一总部多基地制造模式下关联产业多元化、运营管理集团化和生产制造规模化显著特征的基础上，分析了企业产业链运维管控当下的困境以及现有企业资源规划(Enterprise resource planning，ERP)工业软件的不足。设计了面向典型制造企业的新一代国产高端智能ERP工业软件体系架构。针对制造企业当下存在的产业需求协同感知失准、制造资源动态配置失衡和场景应用敏捷适配失效问题，提出典型制造企业新一代国产ERP全产业链端到端协同关键技术体系，包括制造企业增强式生态协同与多基地一体化管理、数智驱动的领域知识演化与全链业务智能决策和基于云原生的服务快速构造与工作流协同优化3项技术。开发了新一代国产高端智能ERP工业软件的部分核心功能模块，并结合典型制造企业产业链上业务开展应用服务。有效推动了钢铁、矿山等典型制造企业多基地协作，实现全产业链端到端协同效能和共创价值提升，为未来制造企业新一代国产高端智能ERP工业软件进一步融入全产业链业务提供参考。

关键词: 制造企业, 产业链, 企业资源规划, 工业软件

Abstract: On the basis of summarizing the distinctive characteristics of associated industrial diversification, centralized group management, and scaled production under the “single headquarters with multiple production bases” manufacturing model in typical manufacturing enterprises such as steel and mining industries, current challenges in industrial chain operation management and the limitations of existing enterprise resource planning (ERP) industrial software are analyzed. A new-generation domestic high-end intelligent ERP industrial software architecture for typical manufacturing enterprises is designed. Addressing current issues including inaccurate collaborative perception of industrial demands, imbalanced dynamic allocation of manufacturing resources, and ineffective agile adaptation to application requirements, the key technical systems for end-to-end collaboration across the entire industry chain is proposed, include "Enhanced ecosystem collaboration and multi-base integrated management for manufacturing enterprises", "Data-intelligence-driven domain knowledge evolution and full-chain business decision-making" and "Cloud-native based rapid service construction and workflow collaborative optimization". Some core functional modules of this new-generation domestic high-end intelligent ERP industrial software are developed, and successful application in typical manufacturing enterprise industrial chain operations. The implementation effectively promotes multi-base collaboration in steel and mining enterprises, enhances end-to-end collaborative efficiency and co-creation value across industrial chains, providing valuable references for deeper integration of next-generation domestic high-end intelligent ERP industrial software with full industrial chain operations.

Key words: manufacturing enterprise, industrial chain, enterprise resource planning, industrial software

中图分类号:

TP315
F425

刘志鑫, 冯毅雄, 王奕, 靳海, 胡炳涛, 张玉久, 王娟, 卢成宇, 娄山河, 李培, 谭建荣. 面向典型制造企业的新一代国产高端智能ERP工业软件研究[J]. 机械工程学报, 2026, 62(11): 30-47.

LIU Zhixin, FENG Yixiong, WANG Yi, JIN Hai, HU Bingtao, ZHANG Yujiu, WANG Juan, LU Chengyu, LOU Shanhe, LI Pei, TAN Jianrong. New-generation Domestic High-end Intelligent ERP Industrial Software for Typical Manufacturing Enterprise[J]. Journal of Mechanical Engineering, 2026, 62(11): 30-47.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.260587

http://www.cjmenet.com.cn/CN/Y2026/V62/I11/30

参考文献

[1] ZHOU L，ZHANG L，FANG Y. Comparison of production-triggering strategies for manufacturing enterprises under random orders[J]. Engineering，2021，7(6)：798-806.
[2] ZHANG C，ZHANG H. The impact of generative AI on management innovation[J]. Journal of Industrial Information Integration，2025，44：100767.
[3] OCHIENG E G，OMINDE D，ZUOFA T. Potential application of generative artificial intelligence and machine learning algorithm in oil and gas sector：Benefits and future prospects[J]. Technology in Society，2024，79：102710.
[4] WULAN T S，NOVIKA P W，NURVIANTI E，et al. Impact of ERP system implementation on operational and financial efficiency in manufacturing industry[J]. Journal of Economic Education and Entrepreneurship Studies，2024，5(3)：491-501.
[5] JAWAD Z N，BALÁZS V. Machine learning-driven optimization of enterprise resource planning (ERP) systems：A comprehensive review[J]. Beni-Suef University Journal of Basic and Applied Sciences，2024，13(1)：4.
[6] KUBBA H. Data conversion in ERP SaaS implementation with generative AI[J]. IEEE Engineering Management Review，2024，52(6)：15-18.
[7] MAHADEVAN S. Empowering manufacturing：Generative AI revolutionizes ERP application[J]. International Journal of Innovative Science and Research Technology，2024，9(3)：593-595.
[8] 马鸿佳，王春蕾，陈欣. 数字平台能力对中小制造企业数字化转型绩效的影响研究[J].管理学报，2025，22(7)：1227-1235. MA Hongjia，WANG Chunlei，CHEN Xin. Research on the impact of digital platform capability on the digital transformation performance of manufacturing SMEs[J]. Chinese Journal of Management，2025，22(7)：1227-1235.
[9] 胡炳涛，冯毅雄，密尚华，等. 面向核电装备的全生命周期价值链协同模式研究[J]. 机械工程学报，2022，58(13)：213-227. HU Bingtao，FENG Yixiong，MI Shanghua，etal. Novel collaborative mode of lifecycle value chain for nuclear power equipment[J]. Journal of Mechanical Engineering，2022，58(13)：213-227.
[10] LI M，LIU Y. The influence of digital innovation ecosystem of high-end equipment manufacturing on the intelligent maturity of enterprise–an empirical study on the configuration of the “three-layer core-periphery” structure[J]. Business Process Management Journal，2024，30(1)：199-221.
[11] YANG L，ZOU H，SHANG C，et al. Adoption of information and digital technologies for sustainable smart manufacturing systems for Industry 4.0 in small，medium，and micro enterprises (SMMEs)[J]. Technological Forecasting and Social Change，2023，188：122308.
[12] 何思楠，柳先辉，张国成，等. 网络协同制造资源虚实映射方法[J]. 计算机集成制造系统，2024，30(11)：4021-4029. HE Sinan，LIU Xianhui，ZHANG Guocheng，et al. Virtual-real mapping method of network collaborative manufacturing resources[J]. Computer Integrated Manufacturing Systems，2024，30(11)：4021-4029.
[13] 孙琳，禹春霞. 考虑调度约束的产能共享平台供需匹配[J]. 计算机集成制造系统，2025，31(7)：2659-2678. SUN Lin，YU Chunxia. Supply and demand matching of capacity sharing platform considering scheduling constraints[J]. Computer Integrated Manufacturing System，2025，31(7)：2659-2678.
[14] 董晨阳，郑小云，余建波. 基于过程挖掘与复杂网络集成的制造过程资源建模与关键加工节点识别[J]. 机械工程学报，2019，55(3)：169-180. DONG Chenyang，ZHENG Xiaoyun，YU Jianbo. Resource modeling of manufacturing process and critical nodes recognition based on the integration of process mining and complex network[J]. Journal of Mechanical Engineering，2019，55(3)：169-180.
[15] GUO L，FANG W，ZHAO Q，et al. The hybrid PROPHET-SVR approach for forecasting product time series demand with seasonality[J]. Computers & Industrial Engineering，2021，161：107598.
[16] DAVID G A，de CARVALHO M P M，SOARES C，et al. IoT-driven deep learning for enhanced industrial production forecasting[J]. IEEE Internet of Things Journal，2024，11(23)：38486-38495
[17] 王彦凯，王时龙，杨波，等. 一种实际多约束环境下的云制造服务组合动态自适应重构方法[J]. 机械工程学报，2023，59(14)：339-351. WANG Yankai，WANG Shilong，YANG Bo，et al. Dynamic adaptive reconfiguration method for cloud manufacturing service composition in practical multi-constraint environment[J]. Journal of Mechanical Engineering，2019，59(14)：339-351.
[18] 凌世雄，柳先辉，张国成，等. 基于规则链的制造服务组合方法[J]. 计算机集成制造系统，2025，31(1)：245-253. LING Shixiong，LIU Xianhui，ZHANG Guocheng，et al. Manufacturing services based on the rules of chain combination method[J]. Journal of Computer Integrated Manufacturing System，2025，31(1)：245-253.
[19] 罗建强，胡月明. 数智赋能制造企业服务创新的价值创造研究[J]. 计算机集成制造系统，2025，31(4)：1396- 1407. LUO Jianqiang，HU Yueming. Research on value creation of service innovation in manufacturing enterprises empowered by digital intelligence[J]. Computer Integrated Manufacturing Systems，2025，31(4)：1396-1407.
[20] PANG S，GUO S，WANG X V，et al. Dual-dimensional manufacturing service collaboration optimization toward industrial internet platforms[J]. Engineering，2023，22：34-48.
[21] LIU B，ZHANG Y，SHENG G，et al. Behavior- environment interaction aware manufacturing service collaboration optimization[J]. Journal of Manufacturing Systems，2024，74：302-315.
[22] SHARMA M，LUTHRA S，JOSHI S，et al. Implementing challenges of artificial intelligence：Evidence from public manufacturing sector of an emerging economy[J]. Government Information Quarterly，2022，39(4)： 101624.
[23] SHARMA V，RAUT R D，HAJIAGHAEI-KESHTELI M，et al. Mediating effect of Industry 4.0 technologies on the supply chain management practices and supply chain performance[J]. Journal of Environmental Management，2022，322：115945.
[24] BAI D，LIU T，ZHANG Y，et al. Scheduling a distributed permutation flowshop with uniform machines and release dates[J]. IEEE Transactions on Automation Science and Engineering，2024，22：215-227.
[25] 庄存波，刘检华，张雷. 工业5.0的内涵、体系架构和使能技术[J]. 机械工程学报，2022，58(18)：75-87. ZHUANG Cunbo，LIU Jianhua，ZHANG Lei. Connotation，architecture and enabling technology of industrial 5.0[J]. Journal of Mechanical Engineering，2022，58(18)：75-87.
[26] 王国彪，宋建丽. 美国先进制造国家战略回顾与未来技术[J]. 机械工程学报，2023，59(19)：187-201. WANG Guobiao，SONG Jianli. Review on the advanced manufacturing national strategy of the united states and prospect of the future technologies[J]. Journal of Mechanical Engineering，2023，59(19)：187-201.
[27] WU W，LU J，ZHANG H. A fractal-theory-based multi-agent model of the cyber physical production system for customized products[J]. Journal of Manufacturing Systems，2023，67：143-154.
[28] ZHANG X，LIN J. Scalable data fusion via a scale-based hierarchical framework：Adapting to multi-source and multi-scale scenarios[J]. Information Fusion，2025，114：102694.
[29] ZHANG H，WANG W，ZHANG S，et al. A novel method based on a convolutional graph neural network for manufacturing cost estimation[J]. Journal of Manufacturing Systems，2022，65：837-852.
[30] DEB P P，BHATTACHARYA D，CHATTERJEE I，et al. A decision-making model with intuitionistic fuzzy information for selection of enterprise resource planning systems[J]. IEEE Transactions on Engineering Management，2022，71：4820-4834.
[31] SONG X，CHANG D，GAO Y，et al. An aggregate– disaggregate framework for forecasting intermittent demand in fast fashion retailing[J]. Advanced Engineering Informatics，2025，64：103069.
[32] LI Y，STARLY B. Building a knowledge graph to enrich ChatGPT responses in manufacturing service discovery[J]. Journal of Industrial Information Integration，2024，40：100612.
[33] PERETZ-ANDERSSON E，TABARES S，MIKALEF P，et al. Artificial intelligence implementation in manufacturing SMEs：A resource orchestration approach[J]. International Journal of Information Management，2024，77：102781.
[34] GANGARAJU P K，RAJ R，KUMAR V，et al. Financial performance in Industry 4.0 agile supply chains：Evidence from manufacturing companies[J]. The TQM Journal，2025，37(1)：222-248.
[35] CHIAPPA S，VIDELA E，VIANA-CÉSPEDES V，et al. Cloud manufacturing architectures：State-of-art，research challenges and platforms description[J]. Journal of Industrial Information Integration，2023，34：100472.
[36] NAPOLEONE A，ANDERSEN A L，BRUNOE T D，et al. Towards human-centric reconfigurable manufacturing systems：Literature review of reconfigurability enablers for reduced reconfiguration effort and classification frameworks[J]. Journal of Manufacturing Systems，2023，67：23-34.
[37] STANKOVIĆ K，JELIĆ D，TOMAŠEVIĆ N，et al. Manufacturing process optimization for real-time quality control in multi-regime conditions：Tire tread production use case[J]. Journal of Manufacturing Systems，2024，76：293-313.

面向典型制造企业的新一代国产高端智能ERP工业软件研究

New-generation Domestic High-end Intelligent ERP Industrial Software for Typical Manufacturing Enterprise

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价