• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (11): 14-29.doi: 10.3901/JME.260401

• 特邀专栏:制造互联与工业智能 • 上一篇    

扫码分享

面向MaaS模式的AI模型快速部署框架研究

柳先辉1, 赵俊龙2, 朱城林3, 余德水2, 盛磊4, 赵卫东1   

  1. 1. 同济大学电子与信息工程学院 上海 201804;
    2. 同济大学计算机科学与技术学院 上海 201804;
    3. 卡奥斯工业智能研究院(青岛)有限公司 青岛 266100;
    4. 宁波知识产权保护中心 宁波 315000
  • 收稿日期:2025-06-10 修回日期:2025-12-24 发布日期:2026-07-29
  • 作者简介:柳先辉,男,1979年出生,副研究员,博士,博士研究生导师。主要研究方向为智能制造和机器视觉。E-mail:lxh@tongji.edu.cn;赵俊龙(通信作者),男,2000年出生,硕士研究生。主要研究方向为AI模型的封装分发部署、容器技术、深度强化学习和工业互联网。E-mail:zhaojunlong@tongji.edu.cn
  • 基金资助:
    国家重点研发计划资助项目(2022YFB3305700)。

Research on Rapid Deployment Framework of AI Models for MaaS Patterns

LIU Xianhui1, ZHAO Junlong2, ZHU Chenglin3, YU Deshui2, SHENG Lei4, ZHAO Weidong1   

  1. 1. School of Electronics and Information Engineering, Tongji University, Shanghai 201804;
    2. School of Computer Science and Technology, Tongji University, Shanghai 201804;
    3. COSMOPlat Institute of Industrial Intelligence, Qingdao 266100;
    4. Ningbo Intellectual Property Protection Center, Ningbo 315000
  • Received:2025-06-10 Revised:2025-12-24 Published:2026-07-29

摘要: 以具身智能、大模型为代表的新一轮人工智能技术正在加速与制造业深度融合,推动制造业向高效、智能、柔性的方向转型升级。面对传统AI模型部署效率低、服务响应慢、资源利用率不高等问题,聚焦“AI驱动的工业应用快速构建部署”主题,提出一种面向“模型即服务”(Model as a service,MaaS)模式的AI模型快速部署框架。该框架采用云-边-端三层架构,针对AI模型标准化定义、封装解耦、边缘快速加载与部署、智能卸载调度,提出了基于容器的AI模型标准封装方法和基于深度强化学习的模型推理任务边缘卸载策略IF-DQN。实验与工程实践结果表明,所提出的框架模型封装率提升40%,镜像体积减小近60%,在不同网络条件下均能保持稳定的分发时延,智能卸载策略在多类任务分布下平均性能提升超过40%。本研究为制造互联与工业智能中的AI部署能力建设提供了可复制、可推广的工程实践方案。

关键词: 模型即服务(MaaS), 模型封装, 模型分发, AI推理任务, 任务卸载, 深度强化学习

Abstract: A new wave of AI technologies, represented by embodied intelligence and large models, is accelerating integration with manufacturing and driving transformation toward greater efficiency, intelligence, and flexibility. To address challenges such as low deployment efficiency, slow response, and poor resource utilization, a rapid AI model deployment framework based on the model-as-a-service (MaaS) paradigm is proposed. Built on a cloud–edge–device architecture, the framework supports standardized model definition, decoupled packaging, fast edge deployment, and intelligent task offloading. MaaSContainer is introduced, a Docker-based packaging format. And IF-DQN is introduced, a deep reinforcement learning–based offloading strategy. Experiments and engineering practice show that the framework achieves up to 40% encapsulation rate, reduces image size by nearly 60%, maintains stable distribution latency under varying networks, and improves task scheduling performance by over 40%. The proposed framework offers a replicable, scalable solution for AI deployment in industrial intelligence, supporting the digital and intelligent transformation of manufacturing.

Key words: model-as-a-service(MaaS), model encapsulation, model distribution, AI inference task, task offloading, deep reinforcement learning

中图分类号: