面向多级循环再利用需求的产品易拆解交互式设计与知识推送研究

doi:10.3901/JME.2024.13.257

机械工程学报 ›› 2024, Vol. 60 ›› Issue (13): 257-267.doi: 10.3901/JME.2024.13.257

扫码分享

面向多级循环再利用需求的产品易拆解交互式设计与知识推送研究

鲍宏^1,2, 高翼飞¹, 万超³, 刘志峰^1,2, 朱利斌¹, 王政¹

1. 合肥工业大学机械工程学院合肥 230009;
2. 合肥工业大学智能制造技术研究院合肥 230051;
3. 中国电器科学研究院股份有限公司广州 510300

收稿日期:2023-09-10 修回日期:2023-12-20 出版日期:2024-07-05 发布日期:2024-08-24
作者简介:鲍宏,男,1982年生,博士,副教授。主要从事绿色设计与制造、低碳设计、可循环设计的研究。E-mail:bhseva7@sina.com;刘志峰(通信作者),男,1963年生,博士,教授,博士研究生导师。主要从事绿色设计与制造的研究。E-mail:zhfliuhfut@126.com
基金资助:
国家重点研发计划资助项目(2022YFC3901703)、合工大智能院科技成果培育专项(Y2023AC0008)和国家自然科学基金(51505119)资助项目。

Interactive Design and Knowledge Transfer Research of Product Easy Disassembly for Multi-stage Recycling Needs

BAO Hong^1,2, GAO Yifei¹, WAN Chao³, LIU Zhifeng^1,2, ZHU Libin¹, WANG Zheng¹

1. School of Mechanical Engineering, Hefei University of Technology, Hefei 230009;
2. Intelligent Manufacturing Institute, Hefei University of Technology, Hefei 230051;
3. China National Electric Apparatus Research Institute, Guangzhou 510300

Received:2023-09-10 Revised:2023-12-20 Online:2024-07-05 Published:2024-08-24

摘要/Abstract

摘要： 设计具有更好的循环再利用性、低碳排放及经济性的产品，有效应对绿色贸易壁垒，是未来产品实现生命周期碳中和、资源节约与循环的关键因素之一。传统易拆解设计研究着重强调易拆解设计准则的导入，忽略了多级循环再利用需求对设计目标的影响，存在概念与详细设计过程与多级循环再利用需求及其场景协同交互程度差、知识使用粗略、设计效率低等问题。论文基于产品设计需求和多级循环再利用需求，构建了面向概念设计与详细设计阶段的产品易拆解设计过程框架，面向零部件多级循环再利用策略开展易拆解结构的关联度分析，通过结构聚类形成易拆解模块化结构，构建面向不同设计阶段的设计-评价交互式模型及易拆解性评价体系，探讨了面向多级循环再利用需求的易拆解设计知识推送策略、关键技术与系统开发，并以洗碗机产品的设计案例验证了方法的可行性。

关键词: 多级循环再利用, 易拆解设计, 模块化, 交互性设计, 知识推送

Abstract: Designing products with better recyclability, low carbon emissions and economy, and effectively responding to green trade barriers is one of the key factors for future products to achieve carbon neutrality, resource conservation and recycling in the life cycle. The traditional easy-to-disassemble design research emphasizes the introduction of easy-to-disassemble design criteria, ignores the influence of multi-level recycling requirements on design goals, and has problems such as poor synergy and interaction between conceptual and detailed design process and multi-level recycling requirements and their scenarios, rough knowledge use, and low design efficiency.Based on the product design requirements and multi-level recycling requirements, this paper constructs the product easy-to-disassemble design process framework for the conceptual design and detailed design stages, carries out the correlation analysis of easy-to-disassemble structures for the multi-level recycling strategy of parts, forms an easy-to-disassemble modular structure through structural clustering, constructs an interactive design-evaluation model and easy-to-disassemble evaluation system for different design stages, and discusses the easy-to-disassemble design knowledge push strategy, key technologies and system development for multi-level recycling needs. The design case of dishwasher products verifies the feasibility of the method.

Key words: multi-level recycling, easy disassembly design, modularity, interactive design, knowledge push

中图分类号:

TH122

鲍宏, 高翼飞, 万超, 刘志峰, 朱利斌, 王政. 面向多级循环再利用需求的产品易拆解交互式设计与知识推送研究[J]. 机械工程学报, 2024, 60(13): 257-267.

BAO Hong, GAO Yifei, WAN Chao, LIU Zhifeng, ZHU Libin, WANG Zheng. Interactive Design and Knowledge Transfer Research of Product Easy Disassembly for Multi-stage Recycling Needs[J]. Journal of Mechanical Engineering, 2024, 60(13): 257-267.

参考文献

[1] 欧盟委员会. 循环经济行动计划[R]. 欧洲：欧盟委员会, 2020. European Commission. Circular Economy Action Plan[R]. European：European Commission, 2020.
[2] SINGH P, SARKAR P. Identifying and analyzing the factors affecting disassembly of products in remanufacturing organizations[J]. Procedia CIRP, 2021(98)：312-317.
[3] HAMIDREZA Z, CHRISTIAN M,PIERRE B. A multi-variable analysis of aircraft structure disassembly‐a technico-economic approach to increase the recycling performance[J]. Sustainable Materials and Technologies, 2021, 29.
[4] KIM J, PARK S, KIM H M. Optimal modular remanufactured product configuration and harvesting planning for end-of-life products[J]. Journal of mechanical design, 2022(4)：144.
[5] FRANCESCO F D, CONNY B, BAS F, et al. The disassembly map：a new method to enhance design for product repairability[J]. Journal of Cleaner Production, 2021, 320：128552.
[6] 尹凤福, 杜泽瑞, 李林, 等. 基于双种群遗传算法的废旧智能手机拆解序列规划[J]. 机械工程学报, 2021, 57(17)：226-235. YIN Fengfu, DU Zerui, LI Lin, et al. Disassembly sequence planning of used smartphone based on dual-population genetic algorithm [J]. Journal of Mechanical Engineering, 2021, 57(17)：226-235.
[7] CHENG Chenyang, CHEN Yinyan. Disassembly line balancing of electronic waste consideringthe degree of task correlation[J]. Electronics, 2022, 11, 533.
[8] 张雷, 耿笑荣, 陶凯博. 考虑碳排放与收益的随机并行拆解线平衡优化[J]. 机械工程学报, 2023, 59(7)：330-338. ZHANG Le, GENG Xiaorong, TAO Kaibo. Optimization of stochastic parallel disassembly line balancing considering carbon emission and profitability[J]. Journal of Mechanical Engineering, 2023, 59(7)：330-338.
[9] ELIAS H, MARIO N P, MATTIAS L, et al. Systematic design for recycling approach-automotive exterior plastics[J]. Procedia CIRP, 2022, 105：204-209.
[10] QIAN D, HEPING Z. The key to solving plastic packaging wastes:design for recycling and recycling technology[J]. Polymers, 2023, 15：1485.
[11] 宋守许, 庞少聪, 周丹, 等. 考虑可靠性与回收再利用性的直流充电桩设计过程关键部件识别方法[J]. 机械工程学报, 2023, 59(7)：18-28. SONG Shouxu, PANG Shaocong, ZHOU Dan. Identification method of key components in design process of dc charging pile considering reliability and reusability[J]. Journal of Mechanical Engineering, 2023, 59(7)：18-28.
[12] KE C, JIANG Z, ZHANG H, et al. An intelligent design for remanufacturing method based on vector space model and case-based reasoning[J]. Journal of Cleaner Production, 2020, 277：123269.
[13] LINDKVIST H L, SUNDIN E. Supporting design for remanufacturing-A framework for implementing information feedback from remanufacturing to product design[J]. Journal of Remanufacturing, 2020, 10(1)：57-76.
[14] 柯庆镝, 李杰, 吕岩, 等. 基于结构和性能相似度分析函数的机械产品优化设计方法[J]. 中国机械工程, 2019, 30(5)：586-594. KE Qingdi, LI Jie, LÜ Yan, et al. Optimization design method for mechanical products based on structural and performance similarity analysis functions[J]. China Mechanical Engineering, 2019, 30(5)：586-594.
[15] 江志刚, 张俊辉, 朱硕, 等. 面向寿命定制的废旧产品再制造设计过程模型研究[J]. 机械工程学报, 2023, 59(13)：238-245. JIANG Zhigang, ZHANG Junhui, ZHU Shuo, et al. Research on design process model of used product remanufacturing for life customization[J]. Journal of Mechanical Engineering, 2023, 59(13)：238-245.
[16] CHEN Yifan, RAN Yan, WANG Zhichao, et al. Meta-action reliability-based mechanical product optimization design under uncertainty environment[J]. Engineering Applications of Artificial Intelligence, 2021, 100：104174.
[17] KANDUKURI S, GUNAY E E, AL-ARAIDAH O, et al. Inventive solutions for remanufacturing using additive manufacturing：ETRIZ[J]. Journal of Cleaner Production, 2021, 305：126992.
[18] WANG Zhijie, CAO Yan, QIAO Hu, et al. Research on the optimization technology of mechanical product design plan based on fuzzy comprehensive evaluation analysis method[J]. Scientific Programming, 2022：1458003.
[19] XUE D, IMANIYAN D. An integrated framework for optimal design of complex mechanical products[J]. Journal of Computing and Information Science in Engineering, 2021, 21(4)：041004.
[20] 张春亮, 陈铭. 基于拆解难度和模糊聚类的泛化报废汽车拆解成本预测[J]. 中国机械工程, 2019, 30(7)：840-845. ZHANG Chunliang, CHEN Ming. Prediction of disassembly costs of ELVs byfuzzy clustering based on disassembly difficulties[J]. China Mechanical Engineering, 2019, 30(7)：840-845.
[21] 刘志峰, 成焕波, 袁合. 面向家电产品的易拆解可回收设计系统研究[J]. 中国机械工程, 2014, 25(16)：2213-2218. LIU Zhifeng, CHENG Huanbo, YUAN He.Research on easy disassembly and recycling design system for household electrical appliances[J]. China Mechanical Engineering, 2014, 25(16)：2213-2218.
[22] CHEN Jinqiang. Fault prediction of a transformer bushing based on entropy weight TOPSIS and gray theory[J]. Computing in Science & Engineering, 2019, 21(6)：55-62.

面向多级循环再利用需求的产品易拆解交互式设计与知识推送研究

Interactive Design and Knowledge Transfer Research of Product Easy Disassembly for Multi-stage Recycling Needs

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	余隋怀, 王鹏超, 王磊, 初建杰, 敖卿, 侯幸刚. 基于知识工程的产品设计研究综述[J]. 机械工程学报, 2024, 60(13): 216-234.
[2]	田大可, 石祖玮, 金路, 郭宏伟, 刘荣强, 孙梓雄. 六棱柱模块化可展开天线索网结构设计与分析[J]. 机械工程学报, 2024, 60(1): 262-273.
[3]	姜兴宇, 马生顺, 马明宇, 齐鹏, 刘伟军. 基于注意力分配的盾构显示界面优化研究[J]. 机械工程学报, 2023, 59(4): 332-344.
[4]	项中明, 倪秋龙, 李振华, 徐建平, 薛翼程, 张哲任, 徐政. 跟网型MMC-HVDC并网暂态同步稳定机理分析^*[J]. 电气工程学报, 2023, 18(3): 250-259.
[5]	吴可, 钟泽宇, 高雪松, 杨冬雷, 王洁, 孔晓红, 迟晓妮. 通用化多功能飞轮测试系统设计与实现^*[J]. 电气工程学报, 2023, 18(2): 26-33.
[6]	田大可, 郭振伟, 金路, 范小东, 刘荣强. 模块化可展天线机构展开动力学建模与运动规划[J]. 机械工程学报, 2023, 59(17): 56-66.
[7]	田大可, 高海明, 金路, 范小东, 刘荣强, 郭振伟, 赵丙峰. 多构型组合式模块化可展开天线机构设计与分析[J]. 机械工程学报, 2023, 59(13): 36-48.
[8]	于泽源, 赵武, 张凯, 王洋, 于淼. 支持产品迭代设计的知识推送方法[J]. 机械工程学报, 2022, 58(18): 292-302.
[9]	夏天, 夏向阳, 刘代飞, 刘远, 易海淦. 柔性直流系统的交流侧故障穿越优化控制策略^*[J]. 电气工程学报, 2021, 16(4): 196-204.
[10]	张海燕, 侯力, 罗岚, 梁爽, 冷松. 变双曲圆弧齿线圆柱齿轮专用机床的模块化设计[J]. 机械工程学报, 2021, 57(3): 77-86.
[11]	顾新建, 马步青, 顾复, 滕宇东. 产品模块化中的若干智能方法[J]. 机械工程学报, 2021, 57(17): 1-9.
[12]	程明, 张邦富, 王飒飒, 王伟. 模块化细轭部磁通切换永磁直线电机及其控制 ^*[J]. 电气工程学报, 2021, 16(1): 1-8.
[13]	姚立纲, 李敬仪, 东辉. 气动软体机械臂模块变刚度性能分析[J]. 机械工程学报, 2020, 56(9): 36-44.
[14]	梁野, 裘乐淼, 刘晓健, 张树有, 谭建荣. 基于设计情境与脑机反馈融合的产品设计知识需求感知技术[J]. 机械工程学报, 2020, 56(7): 151-163.
[15]	谢哲新, 龚哲元, 王田苗, 文力. 可控三维运动的软体驱动器仿真与试验[J]. 机械工程学报, 2018, 54(21): 11-18.