激光复合加工硬脆性材料研究进展综述

doi:10.3901/JME.2024.09.168

机械工程学报 ›› 2024, Vol. 60 ›› Issue (9): 168-188.doi: 10.3901/JME.2024.09.168

扫码分享

激光复合加工硬脆性材料研究进展综述

温秋玲^1,2, 杨野^1,2, 黄辉^1,2, 黄国钦^1,2, 胡中伟^1,2, 陈金鸿^1,2, 汪晖^1,2, 吴贤^2,3

1. 华侨大学制造工程研究院厦门 361021;
2. 高性能工具全国重点实验室(华侨大学) 厦门 361021;
3. 华侨大学机电及自动化学院厦门 361021

收稿日期:2023-08-03 修回日期:2023-12-14 出版日期:2024-05-05 发布日期:2024-06-18
作者简介:温秋玲(通信作者)，女， 1986 年出生，博士，副教授，硕士研究生导师。主要研究方向为基于硬脆性材料的激光复合加工技术。E-mail： qlwen@hqu.edu.cn;杨野，男， 1997 年出生，硕士研究生。主要研究方向为激光高效精密加工硬脆性材料。E-mail： 603618023@qq.com;黄辉，男， 1974 年出生，博士，教授，博士研究生导师。主要研究方向为脆性材料高效智能加工。E-mail： huangh@hqu.edu.cn;黄国钦，男， 1981 年出生，博士，教授，博士研究生导师。主要研究方向为脆性材料高效精密加工。E-mail： smarthgq@hqu.edu.cn;胡中伟，男， 1979 年出生，博士，副教授，硕士研究生导师。主要研究方向为脆性材料高效精密加工。E-mail： huzhongwei@hqu.edu.cn;陈金鸿，男， 1998 年出生，硕士研究生。主要研究方向为激光诱导等离子体加工。E-mail： 1327695194@qq.com;汪晖，男， 1999 年出生，硕士研究生。主要研究方向为激光诱导背面湿法刻蚀透明材料。E-mail： 1138660553@qq.com;吴贤，男， 1989 年出生，博士，副教授，硕士研究生导师。主要研究方向为激光辅助切削加工。E-mail： xianwu@hqu.edu.cn
基金资助:
国家重点研发计划(2023YFB3407200)、高等学校学科创新引智计划(B23011)、教育部创新团队滚动计划(IRT_17R41)和福建省自然科学基金(2021J01322)资助项目。

Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials

WEN Qiuling^1,2, YANG Ye^1,2, HUANG Hui^1,2, HUANG Guoqin^1,2, HU Zhongwei^1,2, CHEN Jinhong^1,2, WANG Hui^1,2, WU Xian^2,3

1. Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021;
2. State Key Laboratory of High Performance Tools, Huaqiao University, Xiamen 361021;
3. School of Electromechanical and Automation, Huaqiao University, Xiamen 361021

Received:2023-08-03 Revised:2023-12-14 Online:2024-05-05 Published:2024-06-18

摘要/Abstract

摘要： 玻璃、半导体、蓝宝石、陶瓷和硬质合金等硬脆性材料被广泛应用于建筑、生物医疗、航空航天、集成电路、新能源、光电显示、轨道交通、海洋等领域。但是其高硬度、大脆性、高耐磨性和耐腐蚀等特性也给它们的加工带来巨大挑战。目前，机械加工、离子束加工、化学蚀刻、激光加工等方式是加工硬脆性材料的主要方法。但是这些加工方式依然存在加工效率和加工质量不可兼得的瓶颈问题。为此，研究人员提出了将激光加工和其他加工方式结合起来的复合加工方法，旨在实现硬脆性材料的高质量和高效率加工。概述了主流的基于激光复合的硬脆材料加工方法，主要包括其他方式辅助激光加工、激光辅助其他方式加工、激光辅助激光加工；重点阐述了这些激光复合加工技术的加工原理、研究现状和加工效果；总结了不同激光复合加工方法的优势、局限性和应用场景，最后对激光复合加工硬脆性材料的未来发展趋势提出了展望。

关键词: 激光复合加工, 硬脆性材料, 加工效率, 加工质量, 微结构

Abstract: Hard and brittle materials such as glass, semiconductor, sapphire, ceramics and hard alloy are widely used in construction industry, biomedicine, aerospace, integrated circuits, new energy, photoelectric display, rail transit, ocean and other fields. However, their high hardness, brittleness, wear resistance and corrosion resistance also bring great challenges to their processing. At present, mechanical machining, ion beam etching, chemical etching, and laser machining are the main methods for machining hard and brittle materials. However, these processing methods still face the bottleneck problem that processing efficiency and processing quality cannot be achieved simultaneously. To overcome the problems mentioned above, researchers have proposed a hybrid processing method that combines laser processing and other processing methods. This study outlines the mainstream methods of laser-based hybrid processing of hard and brittle materials, including laser-assisted other methods processing, other methods-assisted laser processing, and laser assisted laser processing. The processing principle, research status, and processing results evaluation of these laser-based hybrid machining technologies are highlighted. The advantages, limitations, and applications of different laser-based hybrid machining methods are summarized. Finally, the future development trend of laser laser-based hybrid machining of hard brittle materials is presented.

Key words: laser-based hybrid machining, hard brittle materials, processing efficiency, processing quality, microstructures

中图分类号:

V261
TH162

温秋玲, 杨野, 黄辉, 黄国钦, 胡中伟, 陈金鸿, 汪晖, 吴贤. 激光复合加工硬脆性材料研究进展综述[J]. 机械工程学报, 2024, 60(9): 168-188.

WEN Qiuling, YANG Ye, HUANG Hui, HUANG Guoqin, HU Zhongwei, CHEN Jinhong, WANG Hui, WU Xian. Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials[J]. Journal of Mechanical Engineering, 2024, 60(9): 168-188.

参考文献

[1] MU X，WU S，CHENG L，et al. Edge couplers in silicon photonic integrated circuits：A review[J]. Applied Sciences，2020，10(4)：1538.
[2] ANDREANI L C，BOZZOLA A，KOWALCZEWSKI P，et al. Silicon solar cells：Toward the efficiency limits[J]. Advances in Physics：X，2019，4(1)：1548305.
[3] LIU C Y，YEH C Y，LAI W H，et al. Wet-etching mechanism of a semi-sphere pattern on sapphire substrate[J]. Materials Chemistry and Physics，2022，281：125863.
[4] VIKULIN V V，KELINA I Y，SHASTALIN A S，et al. Advanced ceramic structural materials[J]. Refractories and Industrial Ceramics，2004，45(6)：383-386.
[5] PAPEŽ N，DALLAEVR，ŢĂLU Ş，et al. Overview of the current state of gallium arsenide-based solar cells[J]. Materials，2021，14(11)：3075.
[6] DALLA VECCHIA M，RACYTS S，VAN D B G，et al. Gallium-nitride semiconductor technology and its practical design challenges in power electronics applications：An overview[J]. Energies，2019，12(14)：2663.
[7] CASADY J B，JOHNSON R W. Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications：A review[J]. Solid-State Electronics，1996，39(10)：1409-1422.
[8] 李国鑫. 碳化硅功率器件的发展与数值建模[J]. 科技创新与应用，2021，11(13)：67-68，71. LI Guoxin. Development and numerical modeling of silicon carbide power devices[J]. Technology Innovation and Application，2021，11(13)：67-68，71.
[9] 蔡蔚，孙东阳，周铭浩，等. 第三代宽禁带功率半导体及应用发展现状[J]. 科技导报，2021，39(14):42-55. CAI Wei，SUN Dongyang，ZHOU Minghao，et al. Development status of third-generation wide bandgap power semiconductors and their applications[J]. Science & Technology Review，2021，39(14)：42-55.
[10] 范镝. 碳化硅反射镜表面粗糙度的优化[J]. 激光与光电子学进展，2014，51(9)：209-213. FAN Di. Optimization of SiC mirror surface roughness[J]. Laser & Optoelectronics Progress，2014，51(9)：209-213.
[11] WEBER J R，KOEHL W F，VARLEY J B，et al. Quantum computing with defects[J]. Proceedings of the National Academy of Sciences of the United States of America，2010，107(19)：8513-8518.
[12] 毛雅梅，黑鸿君，高洁，等. 钎焊金刚石研究进展及其工具的应用[J]. 机械工程学报，2022，58(4)：80-93. MAO Yamei，HEI Hongjun，GAO Jie，et al. Research progress of brazing diamond and application of tools[J]. Journal of Mechanical Engineering，2022，58(4)：80-93.
[13] MORTET V，WILLIAMS O A，HAENEN K. Diamond：A material for acoustic devices[J]. Physica Status Solidi，2008，205(5)：1009-1020.
[14] BOCANEGRA-BERNAL M H，MATOVIC B. Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures[J]. Materials Science and Engineering A，2010，527(6)：1314-1338.
[15] KELMM H. Silicon nitride for high-temperature applications[J]. Journal of the American Ceramic Society，2010，93(6)：1501-1522.
[16] DUSZOVAÁ A，HALGAŠ R，BL’NDA M，et al. Nanoindentation of WC-Co hardmetals[J]. Journal of the European Ceramic Society，2013，33(12)：2227-2232.
[17] MHADHBI M，DRISS M. Titanium carbide：Synthesis，properties and applications[J]. Journal of Brilliant Engineering，2021，2：1-11.
[18] ZHANG B，ZHENG X，TOKURA H，et al. Grinding induced damage in ceramics[J]. Journal of Materials Processing Technology，2003，132：353-364.
[19] NISHINAGA O，KIKUCHI T，NATUSUI S，et al. Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale nanostructures by selenic acid anodizing[J]. Scientific Reports，2013，3：1-6.
[20] MAHDAVINEJAD R，TOLOUEI-RAD M，SHARFI-BIDGOLI H. Heat transfer analysis of the EDM process on silicon carbide[J]. International Journal of Numerical Methods for Heat and Fluid Flow，2005，15(5)：483-502.
[21] ZHAO Y，KUNIEDA M，ABE K. Study of EDM cutting of single crystal silicon carbide[J]. Precision Engineering，2014，38(1)：92-99.
[22] FÜRJES P，FEKETE Z，ILLES L，et al. Effects of the focused ion beam parameters on nanopore milling in solid state membranes[J]. Procedia Engineering，2012，47：684-687.
[23] HU X，HUANG Z，ZHOU X，et al. Wearable large-scale perovskite solar-power source via nanocellular scaffold[J]. Advanced Materials，2017，29(42)：1703236.
[24] SRISUAI N，HORPRATHUM M，EIAMCHAI P，et al. Development of nanohole array patterned by laser interference lithography technique[J]. Key Engineering Materials，2016，675-676：41-44.
[25] SRINIVASU D S，AXINTE D A，SHIPWAY P H，et al. Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics[J]. International Journal of Machine Tools and Manufacture，2009，49(14)：1077-1088.
[26] LI M，MU D，HUANG S，et al. Ultrathin diamond blades for dicing single crystal SiC developed using a novel bonding method[J]. Journal of Manufacturing Processes，2022，84：88-99.
[27] YIN L，VANCOILLE E，RAMESH K，et al. Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining[J]. International Journal of Machine Tools and Manufacture，2004，44：607-615.
[28] WANG Y，LI L，YANG S，et al. Optimization of machining parameters of SiC single crystal cut by diamond wire saw[J]. MATEC Web of Conferences，2018，232：03002.
[29] 章平，陈国美，倪自丰，等. 基于光助芬顿反应的碳化硅化学机械抛光工艺优化[J]. 表面技术，2022，51(7)：253-262. ZHANG Ping，CHEN Guomei，NI Zifeng，et al. Optimization of chemical mechanical polishing process of SiC based on photo-fenton reaction[J]. Surface Technology，2022，51(7)：253-262.
[30] MING W，CAO C，SHEN F，et al. Numerical and experimental study on WEDM of BN-AlN-TiB2 composite ceramics based on a fusion FEM model[J]. Journal of Manufacturing Processes，2022，76：138-154.
[31] XU H H K，JAHANMIR S. Microfracture and material removal in scratching of alumina[J]. Journal of Materials Science，1995，30：2235-2247.
[32] 张鹏程，温秋玲，姜峰，等. 纳米孔阵列加工技术研究进展[J]. 机械工程学报，2020，56(9)：223-233. ZHANG Pengcheng，WEN Qiuling，JIANG Feng，et al. Research progress in machining technology of nanohole arrays[J]. Journal of Mechanical Engineering，2020，56(9)：223-233.
[33] WU S，BAMMATTER M，TANG W，et al. High aspect ratio etching of nanopores in PECVD SiC through AAO mask[C]// 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems，2013，986-989.
[34] GUDIMETAL P，WANG J，WONG，W. Kerf formation analysis in the abrasive waterjet cutting of industrial ceramics[J]. Journal of Materials Processing Technology，2002，128(1-3)：123-129.
[35] HAN J，LI C，ZHANG M，et al. An investigation of long pulsed laser induced damage in sapphire[J]. Optics & Laser Technology，2009，41(3)：339-344
[36] QI Z，ZHENG Y，WEI J，et al. Surface treatment of an applied novel all-diamond microchannel heat sink for heat transfer performance enhancement[J]. Applied Thermal Engineering，2020，177：115489.
[37] QI L，NISHI K，YASUI M，et al. Femtosecond laser ablation of sapphire on different crystallographic facet planes by single and multiple laser pulses irradiation[J]. Journnl Optlaseng，2010，48(10)：1000-1007.
[38] 宋华伟. 激光辅助加工熔石英玻璃的切削机理与试验研究[D]. 武汉：华中科技大学，2019. SONG Huawei. Research on Cutting mechanism of laser assisted machining for fused silica with experiments[D]. Wuhan：Huazhong University of Science and Technology，2019.
[39] 廖先宇. 脉冲激光加热辅助车削氧化铝陶瓷温度场仿真和试验研究[D]. 长沙：湖南大学，2013. LIAO Xianyu. Simulation of temperature fields and experimental research on pulse-laser assisted turning of Al₂O₃ ceramics[D]. Changsha：Hunan University，2013.
[40] GUO Y，YANG X，KANG J，et al. Experimental investigations on the laser-assisted machining of single crystal Si for optimal machining[J]. Optics and Laser Technology，2021，141：107113.
[41] PARK S S，WEI Y，JIN X L. Direct laser assisted machining with a sapphire tool for bulk metallic glass[J]. CIRP Annals，2018，67(1)：193-196.
[42] ITO Y，UEKI M，KIZAKI T，et al. High-efficiency and precision cutting of glass by selective laser-assisted milling[J]. Precision Engineering，2017，47：498-507.
[43] WU X，ZENG K，ZHONG L，et al. Hybrid micro-milling assisted with laser oxidation based on the hardness reduction that caused by cemented carbide oxidation[J]. Ceramics International，2021，47(24)：35144-35151.
[44] WU X，LI L，HE N，et al. Laser induced oxidation of cemented carbide during micro milling[J]. Ceramics International，2019，45(12)：15156-15163.
[45] 王澍龙. 脉冲激光加热辅助微细切削ZrO₂陶瓷[D]. 南京：南京航空航天大学，2015. WANG Shulong. Research on pulse laser assisted micro machining of ZrO₂ ceramic[D]. Nanjing：Nanjing University of Aeronautics and Astronautics，2015.
[46] WANG S L，LI L，HE N，et al. Research on tool wear of PCD micro end mill in machining of ZrO₂ ceramics[C]// Materials Science Forum. Trans Tech Publications Ltd，2014，800：20-25.
[47] ZHAO G，XIA H，ZHANG Y，et al. Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide[J]. Chinese Journal of Aeronautics，2021，34(4)：465-475.
[48] XIA H，ZHAO G，ZHANG Y，et al. Nanosecond laser-induced controllable oxidation of TiB2–TiC ceramic composites for subsequent micro milling[J]. Ceramics International，2022，48(2)：2470-2481.
[49] 赵国龙，夏宏军，李亮，等. 激光诱导可控氧化辅助微细铣削TiAl金属间化合物的研究[J]. 机械工程学报，2021，57(9)：254-263. ZHAO Guolong，XIA Hongjun，LI Liang，et al. Investigation on laser-induced controllable oxidation assisted micro milling of titanium aluminum intermetallic alloy[J]. Journal of Mechanical Engineering，2021，57(9)：254-263.
[50] MOHAMMADI H，PATTEN J A. LaYer augmented diamond drilling：A new technique to drill hard and brittle materials[J]. Procedia Manufacturing，2016，5：1337-1347.
[51] MENG B，ZHANG J，YUAN D，et al. Machinability improvement of silicon carbide via femtosecond laser surface modification method[J]. Applied Physics A，2019，125(1)：69.
[52] MENG B，YUAN D，ZHENG J，et al. Molecular dynamics study on femtosecond laser aided machining of monocrystalline silicon carbide[J]. Materials Science in Semiconductor Processing，2019，101：1-9.
[53] MA Z，WANG Z，WANG X，et al. Effects of laser-assisted grinding on surface integrity of zirconia ceramic[J]. Ceramics International，2020，46(1)：921-929.
[54] MA Z，WANG Q，DONG J，et al. Experimental investigation and numerical analysis for machinability of alumina ceramic by laser-assisted grinding[J]. Precision Engineering，2021，72：798-806.
[55] AZARHOUSHANG B，SOLTANI B，ZAHEDI A. Laser-assisted grinding of silicon nitride by picosecond laser[J]. The International Journal of Advanced Manufacturing Technology，2017，93：2517-2529.
[56] WESTKÄMPER A. Grinding assisted by Nd：YAG lasers[J]. CIRP Annals，1995，44：317-320.
[57] CHANG W，LUO X，ZHAO J，et al. Laser assisted micro grinding of high strength Materials[C]// Key Engineering Materials，2011，496：44-49.
[58] LI C，HU Y，ZHANG F，et al. Molecular dynamics simulation of laser assisted grinding of GaN crystals[J]. International Journal of Mechanical Sciences，2023，239：107856.
[59] TANGWARODOMNUKUN V，WANG J，HUANG C，et al. An investigation of hybrid laser–waterjet ablation of silicon substrates[J]. International Journal of Machine Tools and Manufacture，2010，56：39-49.
[60] FENG S，HUANG C，WANG J，et al. Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process[J]. Materials Science in Semiconductor Processing，2018，82：112-125.
[61] WANG L，HUANG C，WANG J，et al. An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics[J]. Ceramics International，2018，44(5)：5636-5645.
[62] JOUDKAZIS S，NISHIMURA K，MISAWA H，et al. Control over the crystalline state of sapphire[J]. Advanced Materials. 2006，18(11)：1361-1364.
[63] MENG X，CHEN F，YANG Q，et al. Simple fabrication of closed-packed IR microlens arrays on silicon by femtosecond laser wet etching[J]. Applied Physics A：Materials Science and Processing，2015，121(1)：157-162.
[64] LIU Y，LI X，WANG Z，et al. Morphology adjustable microlens array fabricated by single spatially modulated femtosecond pulse[J]. Nanophotonics，2022，11(3)：571-581.
[65] WANG S，ZHANG F，YANG Q，et al. Chalcogenide glass IR artificial compound eyes based on femtosecond laser microfabrication[J]. Advanced Materials Technologies，2023，8(2)：2200741.
[66] ZHOU W，LI R，LI M，et al. Fabrication of microlens array on chalcogenide glass by wet etching-assisted femtosecond laser direct writing[J]. Ceramics International，2022，48(13)：18983-18988.
[67] HU Y，RAO S，WU S，et al. All-glass 3D optofluidic microchip with built-in tunable microlens fabricated by femtosecond laser-assisted etching[J]. Advanced Optical Materials，2018，6(9)：1701299.
[68] LIANG J，WANG H，HU T，et al. Mammalian cornea inspired anti-fogging silica glass surface achieved by femtosecond laser[J]. Advanced Optical Materials，2023，11(7)：2202287.
[69] TANG S，BIAN H，YANG Q，et al. Large-scale high quality glass microlens arrays fabricated by laser enhanced wet etching[J]. Optics Express，2014，22(23)：29283-29291.
[70] LU Y，DUAN Y，LIU X，et al. High-quality rapid laser drilling of transparent hard materials[J]. Optics Letters，2022，47(4)：921-924.
[71] NAKASHIMA S，SUGIOKA K，ITO T，et al. Fabrication of high-aspect-ratio nanohole arrays on GaN surface by using wet-chemical-assisted femtosecond laser ablation[J]. Journal of Laser Micro Nanoengineering，2011，6(1)：15-19.
[72] OU Y，LI C，QIAN J，et al. Fabrication of hexagonal microstructure on gallium nitride films by wet etching assisted femtosecond laser ablation[J]. Optics Communications，2023，528：128952.
[73] TOKEL O，TURNALL A，MAKEY G，et al. In-chip microstructures and photonic devices fabricated by nonlinear laser lithography deep inside silicon[J]. Nature Photonics，2017，11(10)：639-645.
[74] RUFFIEUX P，SCHARF T，PHILIPOUSSIS I，et al. Two step process for the fabrication of diffraction limited concave microlens arrays[J]. Optics Express，2008，16(24)：19541-19549.
[75] WU C Y，CHIANG T H，HSU C C. Fabrication of microlens array diffuser films with controllable haze distribution by combination of breath figures and replica molding methods[J]. Optics Express，2008，16(24)：19978-19986.
[76] WANG B X，QI J Y，LU Y M，et al. Rapid fabrication of smooth micro-optical components on glass by etching-assisted femtosecond laser modification[J]. Materials，2022，15(2)：678.
[77] WANG W，SONG H，LIAO K，et al. Water-assisted femtosecond laser drilling of 4H-SiC to eliminate cracks and surface material shedding[J]. International Journal of Advanced Manufacturing Technology，2021，112(1-2)：553-562.
[78] LI Q，YU Y，WANG L，et al. Sapphire-based fresnel zone plate fabricated by femtosecond laser direct writing and wet etching[J]. IEEE Photonics Technology Letters，2016，28(12)：1290-1293.
[79] 任乃飞，宋佳佳，李保家，等. 飞秒激光刻蚀氧化锆表面微纳结构及其润湿与抗菌性能[J]. 表面技术，2022，51(9)：359-370. REN Naifei，SONG Jiajia，LI Baojia，et al. Micro-nano structures，wettability and antibacterial property on zirconia surfaces by femtosecond laser etching[J]. Surface Technology，2022，51(9)：359-370.
[80] SUN X，ZHOU F，DONG X，et al. Fabrication of GaAs micro-optical components using wet etching assisted femtosecond laser ablation[J]. Journal of Modern Optics，2020，67(20)：1516-1523.
[81] WANG B，ZHENG J，QI J，et al. Integration of multifocal microlens array on silicon microcantilever via femtosecond-laser-assisted etching technology[J]. Micromachines，2022，13(2)：218.
[82] LIU X，CHEN Q，GUAN K，et al. Dry-etching-assisted femtosecond laser machining[J]. Laser and Photonics Reviews，2017，11(3)：1600115
[83] LIU X，YU L，YANG S，et al. Optical nanofabrication of concave microlens arrays[J]. Laser and Photonics Reviews，2019，13(5)：1800272.
[84] LIU X，YANG S，YU L，et al. Rapid engraving of artificial compound eyes from curved sapphire substrate[J]. Advanced Functional Materials，2019，29(18)：1900037.
[85] HUANG Y，TANG F，GUO Z，et al. Accelerated ICP etching of 6H-SiC by femtosecond laser modification[J]. Applied Surface Science，2019，488：853-864.
[86] YU L，YANG S，LIU X，et al. Ion beam etching assisted femtosecond laser machining to manufacture silicon carbide micro-optical components[J]. Acta Photonica Sinica，2018，47(12)：1214003.
[87] WU C，FANG X，Liu F，et al. High speed and low roughness micromachining of silicon carbide by plasma etching aided femtosecond laser processing[J]. Ceramics International，2020，46(11)：17896-17902.
[88] WANG L，ZHAO Y，YANG Z，et al. Femtosecond laser micromachining in combination with ICP etching for 4H–SiC pressure sensor membranes[J]. Ceramics International，2021，47(5)：6397-6408.
[89] ZHAO Y，ZZHAOY，WANG L，et al. Femtosecond laser processing assisted SiC high-temperature pressure sensor fabrication and performance Test[J]. Micromachines，2023，14(3)：587.
[90] 刘峰，郭旭红，韩玉杰，等. 基于离子束辅助激光的硬质合金表面微织构制备方法研究[J]. 表面技术，2021，50(4)：103-112. LIU Feng，GUO Xuhong，HAN Yujie，et al. Study on fabrication method of micro-textures on cemented carbide surface based on ion beam etching-assisted laser[J]. Surface Technology，2021，50(4)：103-112.
[91] YANG S N，LIU X Q，ZHENG J X，et al. Periodic microstructures fabricated by laser interference with subsequent etching[J]. Nanomaterials，2020，10(7)：1313.
[92] ZHANG J，SUGIOKA K，MIDORIKAWA K. Laser-induced plasma-assisted ablation of fused quartz using the fourth harmonic of a Nd+：YAG laser[J]. Applied Physics A，1998，67：545-549.
[93] HONG M，SUGIOKA K，WU D，et al. Laser-induced-plasma-assisted ablation for glass microfabrication[C]// Proceedings of SPIE-The International Society for Optical Engineering，2001，4595：138-146.
[94] RAHMAN T U，REHMAN Z U，ULLAH S，et al. Laser-induced plasma-assisted ablation (LIPAA) of glass：Effects of the laser fluence on plasma parameters and crater morphology[J]. Optics & Laser Technology，2019，120：105768.
[95] HANADA Y，SUGIOKA K，MIYAMOTO I，et al. Colour marking of transparent materials by laser-induced plasma-assisted ablation (LIPAA)[C]// Journal of Physics：Conference Series，2007，59：687-690.
[96] LIU X，LI Y，LIN W，et al. High-aspect-ratio crack-free microstructures fabrication on sapphire by femtosecond laser ablation[J]. Optics and Laser Technology，2020，132：106472.
[97] WEN Q，CHEN J，LU J，et al. Effect of target on micromachining of sapphire using laser-induced plasma-assisted ablation[J]. Ceramics International，2023，49(9)：14470-14477.
[98] CHEN J，LU X，LI Z，et al. Anisotropy of material removal during laser-induced plasma assisted ablation of sapphire[J]. Ceramics International，2022，48(10)：13880-13889.
[99] 姜峰，江安娜，卢希钊，等. 激光诱导等离子体辅助双面研磨透明材料的装置及方法：CN114290230A[P]. 2022-04-08. JIANG Feng，JIANG Anna，LU Xizhao，et al. Device and method for laser induced plasma assisted double-sided grinding of transparent materials：CN114290230A[P]. 2022-04-08.
[100] 温秋玲，陈金鸿，徐西鹏，等. 激光诱导活性离子刻蚀金刚石的加工装置及加工方法：CN114083139A[P]. 2022-05-05. WEN Qiuling，CHEN Jinhong，XU Xipeng，et al. Laser induced active ion etching of diamond processing device and method：CN114083139B[P]. 2022-05-05.
[101] PAN C，CHEN K，LIU B，et al. Fabrication of micro-texture channel on glass by laser-induced plasma-assisted ablation and chemical corrosion for microfluidic devices[J]. Journal of Materials Processing Technology，2017，240：314-323.
[102] WANG X，HUANG Y，XING Y，et al. Fabrication of micro-channels on Al₂O₃/TiC ceramics using picosecond laser induced plasma micromachining[J]. Journal of Manufacturing Processes，2019，44：102-112.
[103] SAXENA I，EHMANN K F. Multimaterial capability of laser induced plasma micromachining[J]. Journal of Micro and Nano-Manufacturing，2014，2(3)：031005.
[104] TANG H，QIU P，CAO R，et al. Repulsive magnetic field–assisted laser-induced plasma micromachining for high-quality microfabrication[J]. The International Journal of Advanced Manufacturing Technology，2019，102(5-8)：2223-2229.
[105] ZHANG Y，ZGANG Z，ZHANG Y，et al. Study on machining characteristics of magnetically controlled laser induced plasma micro-machining single-crystal silicon[J]. Journal of Advanced Research，2021，30：39-51.
[106] ZHANG Y，LIU Y，BHANDARI S，et al. Investigation of the capabilities of transverse magnetic field controlled laser-induced plasma micro-machining[J]. Journal of Manufacturing Science and Engineering，2021，143(6)：061002.
[107] CHAREE W，QI H，SAETANG，V. Underwater laser micromachining of silicon in pressurized environment[J]. International Journal of Advanced Manufacturing Technology，2022，122(7-8)：3161-3169.
[108] ALAHMARI A M，AHMED N，DARWISH S. Laser beam micro-machining under water immersion[J]. International Journal of Advanced Manufacturing Technology，2016，83(9-12)：1671-1681.
[109] VAN D L S，HAGMEIJER R，ROMER G . Picosecond pulsed underwater laser ablation of silicon and stainless steel：Comparing crater analysis methods and analysing dependence of crater characteristics on water layer thickness[J]. Applied Surface Science，2021，540 ：148005.
[110] WU C，FANG X，KANG Q，et al. Crystal cleavage，periodic nanostructure and surface modification of SiC ablated by femtosecond laser in different media[J]. Surface and Coatings Technology，2021，424：127652.
[111] ZHU S，LU Y F，HONG M H，et al. Laser ablation of solid substrates in water and ambient air[J]. Journal of Applied Physics，2001，89(4)：2400-2403.
[112] GUO Y，QIU P，XU S，et al. Laser-induced microjet-assisted ablation for high-quality microfabrication[J]. International Journal of Extreme Manufacturing，2022，4(3)：035101.
[113] REN N，GAO F，WANG H，et al. Water-induced effect on femtosecond laser layered ring trepanning in silicon carbide ceramic sheets using low-to-high pulse repetition rate[J]. Optics Communications，2021，496：127040.
[114] REN N，XIA K，YANG H，et al. Water-assisted femtosecond laser drilling of alumina ceramics[J]. Ceramics International，2021，47(8)：11465-11473.
[115] MORITA N，ISHIDA S，FUJIMORI Y，et al. Pulsed laser processing of ceramics in water[J]. Applied Physics Letters，1988，52：1965-1966.
[116] NAKASHIMA S，SUGIOKA K，MIDORIKAWA K. Micro and Nanofabrication of GaN by Wet-Chemical-Assisted Femtosecond Laser Ablation[C]// International Conference on Micro/Nanoscale Heat Transfer. 2009，43895：705-712.
[117] SUGIOKA K，CHENG Y. Fabrication of 3D microfluidic structures inside glass by femtosecond laser micromachining[J]. Applied Physics A：Materials Science and Processing，2013，114(1)：215-221.
[118] RICHMANN A，KUZMINYKH Y，RICHERZHAGEN B，et al. Laser microjet cutting of up to 3 mm thick sapphire[C]// International Congress on Applications of Lasers and Electro-Optics，2014，269：1139-1143.
[119] ELKINGTON H，MARIMUTHU S，SMITH B. High power water jet guided laser cutting of SiC/SiC ceramic matrix composite[J]. Journal of Laser Micro Nanoengineering，2022，17(3)：168-173.
[120] MARIMUTHU S，DUNLEAVEY J，LIU Y，et al. Water-jet guided laser drilling of SiC reinforced aluminium metal matrix composites[J]. Journal of Composite Materials，2019，53(26-27)：3787-3796.
[121] ZHANG X，WEI Q，WANG H. Research studies on kerf quality of cutting single crystal diamond with water-jet guided laser[J]. Journal of Optoelectronics and Advanced Materials，2022，24(3-4)：162-167.
[122] ZHANG Y，QIAO H，ZHAO J，et al. Surface topography by water jet-guided laser texturing on wettability of monocrystalline silicon[J]. International Journal of Advanced Manufacturing Technology，2022，120(3-4)：2747-2761.
[123] QIAO H，ZHIHE C，CUI J，et al. Experimental study on water jet guided laser micro-machining of mono-crystalline silicon[J]. Optics & Laser Technology，2021，140：107057.
[124] WANG J，NIINO H，YABE A. One-step microfabrication of fused silica by laser ablation of an organic solution[J]. Applied Physics A：Materials Science & Processing，1999，68(1)：111-113.
[125] KAWAGUCHI Y，SATO T，NARAZAKI A，et al. Etching a micro-trench with a maximum aspect ratio of 60 on silica glass by laser-induced backside wet etching (LIBWE)[J]. Japanese Journal of Applied Physics，2005，44(1-7)：176-178.
[126] XIE X，HU M，CHEN W，et al. Cavitation bubble dynamics during laser wet etching of transparent sapphire substrates by 1 064 nm laser irradiation[J]. Journal of Laser Micro Nanoengineering，2013，8(3)：259-265.
[127] XIE X，HUANG X，JIANG W，et al. Three dimensional material removal model of laser-induced backside wet etching of sapphire substrate with CuSO₄ solutions[J]. Optics and Laser Technology，2017，89：59-68.
[128] TAN Y，CHU W，WANG P，et al. Water-assisted laser drilling of high-aspect-ratio 3D microchannels in glass with spatiotemporally focused femtosecond laser pulses[J]. Optical Materials Express，2019，9(4)：1971-1978.
[129] KOWN K K，KIM H，KIM T，et al. High aspect ratio channel fabrication with near-infrared laser-induced backside wet etching[J]. Journal of Materials Processing Technology，2020，278：116505.
[130] 张先烁，张朝阳，朱帅杰，等. 一种液态流动涂层辅助激光背向湿刻加工低锥度玻璃深孔的装置及方法：CN110640337A[P]. 2020-01-03.
ZHANG Xianshuo，ZHANG Chaoyang，ZHU Shuangjie，et al. A device and method for processing low taper glass deep holes using liquid flow coating assisted laser back wet etching：CN110640337A[P]. 2020-01-03.
[131] JIAO L，ZHENG H，ZHANG Y，et al. Picosecond laser drilling of silicon with applied voltage[J]. SN Applied Sciences，2019，1(1)：80.
[132] ZHENG H，JIANG Z. Femtosecond laser micromachining of silicon with an external electric field[J]. Journal of Micromechanics and Microengineering，2010，20(1)：017001
[133] SCHÄFER M，TEREKHIN P N，KANG Y，et al. Magnetic-field assisted laser ablation of silicon[J]. JOSA B，2021，38(12)：1-6.
[134] FARROKHI H，GRUZDEV V，ZHENG H，et al. Magneto-absorption effects in magnetic-field assisted laser ablation of silicon by UV nanosecond pulses[J]. Applied Physics Letters，2016，108(25)：254103.
[135] MIYAMOTO N，ITO T，WEI C，et al. Ultrafast internal modification of glass by selective absorption of a continuous-wave laser into excited electrons[J]. Optics Letters，2020，45(11)：3171-3174.
[136] ITO Y，YOSHIZAKI R，MIYUMOTO N，et al. Ultrafast and precision drilling of glass by selective absorption of fiber-laser pulse into femtosecond-laser-induced filament[J]. Applied Physics Letters，2018，113(6)：061101.
[137] YOSHIZAKI R，ITO Y，YOSHITAKE S，et al. Mechanism of material removal through transient and selective laser absorption into excited electrons in fused silica[J]. Journal of Applied Physics，2021，130(5)：053102.
[138] LI Y，LIU H，HONG M. High-quality sapphire microprocessing by dual-beam laser induced plasma assisted ablation[J]. Optics Express，2020，28(5)：6242-6250.

激光复合加工硬脆性材料研究进展综述

Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李晗, 章程, 陈杰, 安庆龙, 陈明. SiC_f/SiC复合材料激光烧蚀辅助铣削材料去除机理与加工表面质量评价[J]. 机械工程学报, 2024, 60(9): 206-217.
[2]	黄家乐, 李萍, 邓亮明, 陈志鹏, 周伟, 向建化. 基于不对称流动阻力的热二极管设计及传热性能研究[J]. 机械工程学报, 2024, 60(18): 208-217.
[3]	田波, 娄军强, 沈家旭, 柳丽, 陈特欢, 李国平, 魏燕定. 可用于微创手术的毫米级微小并联机器人的设计、制造及实现[J]. 机械工程学报, 2024, 60(17): 147-155.
[4]	彭子龙, 吴金印, 王萌杰, 李一楠, 兰红波. 电场驱动微尺度3D打印掩膜电解加工微结构[J]. 机械工程学报, 2024, 60(15): 420-436.
[5]	许思远, 张卫东, 毛玉明, 牛斌. 数据驱动的指定变形非均质多胞结构优化设计[J]. 机械工程学报, 2024, 60(1): 85-95.
[6]	郭江, 张鹏飞, 杨哲, 赵勇, 李琳光, 景召, 张蒙, 庞桂兵. 匀光阵列微结构模具高性能非接触仿形抛光[J]. 机械工程学报, 2024, 60(1): 127-136.
[7]	都建标, 张强, 宗文俊. 硬脆及黑色金属材料的单点金刚石车削加工技术综述[J]. 机械工程学报, 2023, 59(7): 156-175.
[8]	伍春霞, 唐恒, 张仕伟, 孙亚隆, 伍晓宇, 汤勇. 平板热管沟槽吸液芯结构刻蚀制造研究进展[J]. 机械工程学报, 2023, 59(24): 140-155.
[9]	黄维维, 张鑫泉, 朱利民. 基于重复控制的快速刀具伺服系统前馈补偿方法[J]. 机械工程学报, 2023, 59(21): 43-51.
[10]	陈新, 陈云, 杨志军, 高健, 陈桪. 电子器件高精高效制造的若干关键技术研究进展[J]. 机械工程学报, 2023, 59(19): 164-175.
[11]	贾振元, 付饶, 王福吉. 碳纤维复合材料构件加工技术进展[J]. 机械工程学报, 2023, 59(19): 348-374.
[12]	潘鑫, 彭瑞轩, 张皓宇, 吴海琦, 高金吉. 高端机械装备新型电磁式自动平衡系统研究[J]. 机械工程学报, 2023, 59(18): 3-12.
[13]	王红, 王兵, 刘战强, 赵金富, 宋清华. 表层改性处理改善难加工材料切削加工性的研究进展[J]. 机械工程学报, 2023, 59(15): 311-332.
[14]	王美荣, 陈敏, 蒋嘉豪, 宋晓国, 唐冬雁, 曹健. 激光表面毛化对Ti/K9玻璃扩散焊接头性能的影响[J]. 机械工程学报, 2023, 59(14): 130-137.
[15]	陈逢军, 向望, 胡天. 静电气喷磁响应复合微结构功能表面制备研究[J]. 机械工程学报, 2022, 58(9): 298-306.