减速器滞回曲线的形态特性研究

doi:10.3901/JME.2024.01.343

机械工程学报 ›› 2024, Vol. 60 ›› Issue (1): 343-351.doi: 10.3901/JME.2024.01.343

扫码分享

减速器滞回曲线的形态特性研究

石照耀, 程慧明

北京工业大学北京市精密测控技术与仪器工程技术研究中心北京 100124

收稿日期:2023-01-23 修回日期:2023-09-18 发布日期:2024-03-15
作者简介:石照耀(通信作者)，男，1964年出生，博士，教授，博士研究生导师。主要研究方向为精密测试技术和仪器、齿轮工程与精密减速器。E-mail：shizhaoyao@126.com
程慧明，男，1994年出生，博士研究生。研究方向为精密传动系统测试技术与装备，精密齿轮传动。E-mail：chenghuiming295@126.com
基金资助:
深圳市技术攻关重点资助项目（JSGG20220831104001002）。

Research on the Morphological Characteristics of Hysteretic Curve of Reducer

SHI Zhaoyao, CHENG Huiming

Beijing Engineering Research Center of Precision Measurement Technology and Instruments, Beijing University of Technology, Beijing 100124

Received:2023-01-23 Revised:2023-09-18 Published:2024-03-15

摘要/Abstract

摘要： 滞回曲线被用于反映减速器的滞回现象，但工程实践中，滞回曲线的形态特性被忽视并默认具有加载速率独立性。基于对减速器滞回曲线的解构分析，证了减速器滞回曲线具有加载速率依赖性，并分析了具体影响；提出了表征滞回曲线形态特性的四个参数，给出了各参数的物理含义；通过试验研究，验证了减速器滞回曲线形态的加载速率依赖性，厘清了不同材质减速器的四个形态特性参数在不同加载速率下的变化；最后，指明了滞回曲线的形态特性在理论和工程应用方面的价值。

关键词: 减速器, 滞回曲线, 加载速率依赖性, 形态特性参数

Abstract: The hysteresis curve is used to reflect the hysteresis phenomenon of the reducer, but in engineering practice, the morphologic characteristics of the hysteresis curve are ignored and default to have the loading rate independence. The loading rate dependence of the morphologic of the hysteresis curve of the reducer is demonstrated, and the specific impact is analyzed. Four parameters are proposed to characterize the morphological characteristics of the hysteresis curve, and the physical meaning of each parameter is given. Through further experimental research, it has been verified that the morphologic of the hysteretic curve of the reducer has the loading rate dependence, and the changes of the four parameters of the reducer with different materials under different loading rates are clarified. Finally, it points out the value of the morphologic characteristics of the hysteresis curve in theory and engineering application.

Key words: reducer, hysteresis curve, loading rate dependence, morphological characteristic parameters

中图分类号:

TH89

石照耀, 程慧明. 减速器滞回曲线的形态特性研究[J]. 机械工程学报, 2024, 60(1): 343-351.

SHI Zhaoyao, CHENG Huiming. Research on the Morphological Characteristics of Hysteretic Curve of Reducer[J]. Journal of Mechanical Engineering, 2024, 60(1): 343-351.

参考文献

[1] MORRIS K A. What is hysteresis?[J]. Applied Mechanics Reviews an Assessment of the World Literature in Engineering Sciences,2011.
[2] 徐航. 精密减速器回差测量与评价体系研究[D]. 北京:北京工业大学,2018. XU Hang. Research on measurement and evaluation system of precision reducer lost motion[D]. Beijing:Beijing University of Technology,2018.
[3] 宾帅. 超弹性形状记忆合金性能试验与力学模型研究[D]. 湘潭:湖南科技大学,2015. BIN Shuai. Superelastic shape memory alloy research on performance test and mechanical model[D]. Xiangtan:Hunan University of Science and Technology,2015.
[4] 程慧明,石照耀,于渤,等. 服务机器人小型关节回差测量的试验研究[J]. 仪器仪表学报,2020,41(5):48-57. CHENG Huiming,SHI Zhaoyao,YU Bo,et al. Experiment research on hysteresis measurement of the small-size joint of service robot[J]. Chinese Journal of Scientific Instrument,2020,41(05):48-57.
[5] 石照耀,徐航,韩方旭,等.精密减速器回差测量的现状与趋势[J]. 光学精密工程,2018,26(9):2150-2158. SHI Zhaoyao,XU Hang,HAN Fangxu,et al. Current status and trends in precision reducer lost motion measurement[J]. Optics and Precision Engineering,2018,26(9):2150-2158.
[6] 安子军,杨荣刚,宜亚丽. 精密钢球传动啮合法向力与弹性回差[J]. 机械工程学报,2016,52(9):42-48. AN Zijun,YANG Ronggang,YI Yali. Engagement Normal force and elastic backlash of precision ball transmission[J]. Journal of Mechanical Engineering,2016,52(9):42-48.
[7] 石照耀,程慧明. 国内外机器人关节测试技术研究现状及展望[J]. 哈尔滨工程大学学报,2023,44(05):679-688. SHI Zhaoyao,CHENG Huiming. Status and prospects of domestic and international research on robot actuator testing technology[J]. Journal of Harbin Engineering University,2023,44(5):679-688.
[8] 李鸿光,孟光,闻邦椿. 带间隙的双线滞回系统的非线性振动[J]. 机械工程学报,2004,40(7):10-13. LI Hongguang,MENG Guang,WEN Bangchun. Nonlinear oscillation of bilinear hysteretic system with clearance.[J]. Journal of Mechanical Engineering,2004,40(7):10-13.
[9] SHI Zhaoyap,CHENG Huiming,YU Bo,et al. Loading rate dependence of reducer hysteresis and its influence on lost motion test[J]. Machines,2022,10(9):765-786.
[10] AI-BENDER F,LAMPAERT V,SWEVERS J. The generalized Maxwell-slip model:A novel model for friction simulation and compensation[J]. IEEE Transactions on Automatic Control,2005,50(11):1885-1887.
[11] 国家市场监督管理总局,中国国家标准化管理委员会. GB/T 40731-2021,精密减速器回差测试与评价方法[S]. 北京:中国标准出版社,2021. General Administration of Quality Supervision,State Administration for Market Regulation. GB/T 40731-2021,Method of test and evaluation for lost motion of precision reducer[S]. Beijing:Standards Press of China,2021.
[12] CHENG Huiming,SHI Zhaoyao,YU Zhiyong. Dynamic torsional stiffness of reducers and its testing method[J]. Applied Sciences,2023,13(16):9277-9293.
[13] 俞志勇,石照耀,程慧明,等. 精密减速器回差试验台的度特性[J]. 光学精密工程,2023,31(16):2372-2382. YU Zhiyong,SHI Zhayo,CHNEG Huiming. Accuracy characteristic of test bench of lost motion of precision reducer[J]. Optics and Precision Engineering,2023,31(16):2372-2382.

[1]	石照耀, 俞志勇, 程慧明, 于渤, 左广祥. 精密减速器试验台的精度性能评价体系[J]. 机械工程学报, 2024, 60(16): 62-72.
[2]	张德权, 李星奥, 贾新宇, 叶楠, 韩旭. 基于分层贝叶斯推理的RV减速器动力学模型修正及动态响应预测方法[J]. 机械工程学报, 2024, 60(11): 135-144.
[3]	李慧莱, 凌振飞, 王泽正, 孙茂文, 刘浩, 欧阳小平, 李斌斌. 高扭矩密度仿人机器人驱动单元研究[J]. 机械工程学报, 2022, 58(18): 192-204.
[4]	韩特, 李彦夫, 雷亚国, 李乃鹏, 李响. 融合图标签传播和判别特征增强的工业机器人关键部件半监督故障诊断方法[J]. 机械工程学报, 2022, 58(17): 116-124.
[5]	许立新. 考虑位置度误差的RV减速器多组滚针轴承动态载荷特性研究[J]. 机械工程学报, 2022, 58(17): 144-155.
[6]	汤勇, 王志威, 陈恭, 张仕伟, 袁伟. 摆线齿轮低成本冷精整加工关键工艺研究[J]. 机械工程学报, 2022, 58(14): 154-160.
[7]	黄健, 李朝阳, 陈兵奎. RV减速器用新型交错滚子主轴承承载能力分析与试验研究[J]. 机械工程学报, 2021, 57(7): 68-77.
[8]	彭鹏, 柯梁亮, 汪久根. 噪声干扰下的RV减速器故障诊断[J]. 机械工程学报, 2020, 56(1): 30-36.
[9]	汪久根, 柯梁亮. 基于残差网络的RV减速器故障诊断[J]. 机械工程学报, 2019, 55(3): 73-80.
[10]	孙海亮;訾艳阳;袁静;何正嘉;李康;陈雪军. 非抽样多小波和Hilbert-Huang时频分析在行星减速器早期故障诊断中的应用[J]. , 2013, 49(3): 56-62.
[11]	程珩;于亮亮;黄超勇. 基于混合遗传算法的连采机减速器试验模态参数识别[J]. , 2013, 49(3): 74-79.
[12]	李波. 空间润滑谐波减速器传动性能正交试验分析[J]. , 2012, 48(3): 82-87.
[13]	梁锡昌;吕宏展. 减速器的分类创新研究[J]. , 2011, 47(7): 1-7.
[14]	张干清;龚宪生;王欢欢;邓小东;王本术. 基于可靠灰色粒子群算法的盾构机行星减速器轮系的多目标优化设计[J]. , 2010, 46(23): 135-145.
[15]	张俊;宋轶民;张策. 少齿差环板式减速器的弹性动力学分析[J]. , 2008, 44(2): 118-123.

减速器滞回曲线的形态特性研究

Research on the Morphological Characteristics of Hysteretic Curve of Reducer

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价