数控机床可靠性技术新进展

doi:10.3901/JME.2023.19.152

机械工程学报 ›› 2023, Vol. 59 ›› Issue (19): 152-163.doi: 10.3901/JME.2023.19.152

扫码分享

数控机床可靠性技术新进展

杨兆军^1,2, 何佳龙^1,2, 刘志峰^1,2, 李国发^1,2, 陈传海^1,2

1. 吉林大学数控装备可靠性教育部重点实验室长春 130022;
2. 吉林大学机械与航空航天工程学院长春 130022

收稿日期:2023-03-31 修回日期:2023-06-18 出版日期:2023-10-05 发布日期:2023-12-11
通讯作者: 何佳龙(通信作者),男,1989年出生,博士,教授,博士研究生导师。主要研究方向为数控机床可靠性理论与技术、剩余寿命预测与维护等。E-mail:hejl@jlu.edu.cn
作者简介:杨兆军,男,1956年出生,博士,教授,博士研究生导师。主要研究方向为数控机床可靠性理论与技术、数控机床可靠性加速试验技术与装备等。E-mail:yzj@jlu.edu.cn;刘志峰,男,1973年出生,博士,教授,博士研究生导师。主要研究方向为数控机床可靠性理论与技术、高性能装配理论与技术、智能制造技术。E-mail:lzfjlu@jlu.edu.cn;李国发,男,1970年出生,博士,教授,博士研究生导师。主要研究方向为数控机床可靠性理论与技术、结构可靠性分析与优化设计等。E-mail:ligf@jlu.edu.cn;陈传海,男,1983年出生,博士,教授,博士研究生导师。主要研究方向为数控机床可靠性理论与技术等。E-mail:cchchina@foxmail.com
基金资助:
吉林省自然科学基金(20220101202JC)和国家自然科学基金重点(U22B2087)资助项目。

Recent Progress in Reliability Technology of CNC Machine Tools

YANG Zhaojun^1,2, HE Jialong^1,2, LIU Zhifeng^1,2, LI Guofa^1,2, CHEN Chuanhai^1,2

1. Key Laboratory of CNC Equipment Reliability of Ministry of Education, Jilin University, Changchun 130022;
2. School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130022

Received:2023-03-31 Revised:2023-06-18 Online:2023-10-05 Published:2023-12-11

摘要/Abstract

摘要： 数控机床作为制造业的工业母机，是国家战略装备，可靠性技术是制约其产品质量的关键共性技术。主要对我国近十余年来数控机床可靠性技术研究的新进展进行了综述，包括全生命周期的技术路线、可靠性试验技术与装备、可靠性设计、可靠性增长以及可靠性数据库与试验研究基地建设等情况。分析指出了可靠性技术研究存在的问题和不足，并对数控机床可靠性的技术需求与发展动态进行了展望。

关键词: 数控机床, 可靠性, 研究进展

Abstract: CNC machine tools as the industrial mother machine of the manufacturing industry, are the national strategic equipment, and reliability technology is the key common technology to limit the quality of its products. The new progress of reliability technology research in CNC machine tools in China in the past ten years or so is mainly reviewed, including the whole life cycle technology route, reliability test technology and equipment, reliability design, reliability growth, and reliability database and test research base construction. The analysis points out the problems and shortcomings of reliability technology research, and the technical needs and development dynamics of CNC machine tools reliability are foreseen.

Key words: CNC machine tools, reliability, research progress

中图分类号:

TG659

杨兆军, 何佳龙, 刘志峰, 李国发, 陈传海. 数控机床可靠性技术新进展[J]. 机械工程学报, 2023, 59(19): 152-163.

YANG Zhaojun, HE Jialong, LIU Zhifeng, LI Guofa, CHEN Chuanhai. Recent Progress in Reliability Technology of CNC Machine Tools[J]. Journal of Mechanical Engineering, 2023, 59(19): 152-163.

参考文献

[1] 杨兆军,陈传海,陈菲,等. 数控机床可靠性技术的研究进展[J]. 机械工程学报,2013,49(20):130-139. YANG Zhaojun,CHEN Chuanhai,CHEN Fei,et al. Progress in the research of reliability technology of machine tools[J]. Journal of Mechanical Engineering,2013,49(20):130-139.
[2] 陈循,陈文华,谢里阳,等. 机械可靠性理论与应用——现状与发展[M]. 北京:国防工业出版社,2022. CHEN Xun,CHEN Wenhua,XIE Liyang,et al. Theory and application of mechanical reliability:current situation and development[M]. Beijing:National Defense Industry Press,2022.
[3] 李洪洲,杨兆军,许彬彬,等. 数控机床可靠性评估试验周期设计[J]. 吉林大学学报,2016,46(5):1520-1527. LI Hongzhou,YANG Zhaojun,XU Binbin,et al. Design of testing period for reliability assessment of NC machine tools[J]. Journal of Jilin University,2016,46(5):1520-1527.
[4] 杨兆军,李洪洲,陈传海,等. 考虑定时截尾数据的数控机床可靠性Bootstrap区间估计方法[J]. 机械工程学报,2017,53(7):129-137. YANG Zhaojun,LI Hongzhou,CHEN Chuanhai,et al. Bootstrap interval estimation of reliability for numerical controlled machine tools considering the time-censored data[J]. Journal of Mechanical Engineering,2017,53(7):129-137.
[5] 杨兆军,许彬彬,杨川贵,等. 由电液伺服和测功机混合加载的机床主轴可靠性试验台:CN201210370120.1[P]. 2014-11-26. YANG Zhaojun,XU Binbin,YANG Chuangui,et al. Reliability test bench for machine tool spindle loaded by hybrid electrohydraulic servo and dynamometer:CN201210370120.1[P]. 2014-11-26.
[6] 杨兆军,陈菲,李国发,等. 由测功机和液压混合加载的动力伺服刀架可靠性试验台:CN201210213399.2[P]. 2014-09-10. YANG Zhaojun,CHEN Fei,LI Guofa,et al. Reliability test bench for dynamic servo turret loaded by dynamometer and hydraulic pressure:CN201210213399.2[P]. 2014-09-10.
[7] 李国发,王剑,周传阳,等. 基于现场载荷特征的加工中心刀库机械手可靠性试验方法:CN201510119742.0[P]. 2016-04-20. LI Guofa,WANG Jian,ZHOU Chuanyang,et al. Reliability test method for machining center tool magazine manipulator based on field load characteristics:CN201210213399.2[P]. 2016-04-20.
[8] 杨兆军,何佳龙,陈菲. 光栅尺可靠性试验装置及方法:CN201610396962.2[P]. 2018-01-26. YANG Zhaojun,HE Jialong,CHEN Fei,et al. Reliability test device and method for grating ruler:CN201610396962.2[P]. 2018-01-26.
[9] 杨兆军,何佳龙,王继利,等. 编码器可靠性试验装置及方法:CN201610088216.7[P]. 2017-07-04. YANG Zhaojun,HE Jialong,WANG Jili,et al. Encoder reliability test device and method:CN201610088216.7[P]. 2017-07-04.
[10] 欧屹,冯虎田,徐益飞,等. 一种滚珠丝杠副可靠性试验装置:CN201410016756.5[P]. 2016-02-24. OU Yi,FENG Hutian,XU Yifei,et al. A ball screw reliability test device:CN201410016756.5[P]. 2016-02-24.
[11] 陶卫军,冯虎田,欧屹,等. 滚动直线导轨副可靠性试验装置及方法:CN201210509140.2[P]. 2015-02-25. TAO Weijun,FENG Hutian,OU Yi,et al. Rolling linear guide reliability test device and method:CN201210509140.2[P]. 2015-02-25.
[12] 赵钦志,王立平,王军见. 数控机床可靠性试验和评估技术分析与研究[J]. 制造技术与机床,2017(11):17-21. ZHAO Qinzhi,WANG Liping,WANG Junjian. Reliability tests and evaluation technique research of CNC machine tools[J]. Manufacturing Technology & Machine Tool,2017(11):17-21.
[13] 王义强,贾亚洲,于骏一,等. 数控车床载荷谱数据库的建立[J]. 吉林工业大学学报,1998,28(1):34-38. WANG Yiqiang,JIA Yazhou,YU Junyi,et al. Setup of the load spectrum data bank of CNC lathe[J]. Journal of Jilin University of Technology,1998,28(1):34-38.
[14] WANG Yiqiang,JIA Yazhou,SHEN Guixiang. Multidimensional force spectra of CNC machine tool tools and their applications,part one:force spectra[J]. International Journal of Fatigue,2002,24(10):1037-1046.
[15] 陈传海. 面向可靠性概率设计的数控机床载荷谱建立方法研究[D]. 长春:吉林大学,2013. CHEN Chuanhai. Study on load spectrum for probability-reliability design of NC machine tools[D]. Changchun:Jilin University,2013.
[16] 黄祖广,赵钦志,盛伯浩,等. 加工中心可靠性试验载荷谱的研究[J]. 制造技术与机床,2008(2):60-65. HUANG Zuguang,ZHAO Qinzhi,SHENG Bohao,et al. Research on the loading chart for reliability testing of machining center[J]. Manufacturing Technology & Machine Tool,2008(2):60-65.
[17] 何佳龙. 数控车床切削力谱的编制及其在功能部件可靠性试验中的应用[D]. 长春:吉林大学,2017. HE Jialong. Compilation of cutting force spectrum of CNC lathe and its application in reliability test[D]. Changchun:Jilin University,2017.
[18] 王升旭. 数控车床非平稳动态切削力谱的编制[D]. 长春:吉林大学,2021. WANG Shengxu. Compilation of nonstationary and dynamic cutting force spectrum of CNC lathe[D]. Changchun:Jilin University,2021.
[19] HE Jialong,ZHAO Xinyue,LI Guofa,et al. Time domain load extrapolation method for CNC machine tools based on GRA-POT model[J]. International Journal of Advanced Manufacturing Technology. 2019,103(9-12):3799-3812.
[20] WANG Shengxu,HE Jialong,LI Guofa,et al. Compilation method of CNC lathe cutting force spectrum based on kernel density estimation of G-SCE[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):3713-3724.
[21] HE Jialong,WANG Shenxu,LI Guofa,et al. Compilation of NC lathe dynamic cutting force spectrum based on two-dimensional mixture models[J]. International Journal of Advanced Manufacturing Technology. 2018,98(1-4):251-262.
[22] 于立娟,安阳,何佳龙,等. 机电装备载荷谱外推技术研究进展及发展趋势[J]. 吉林大学学报,2023,53(4):941-953. YU Lijuan,AN Yang,HE Jialong,et al. Research progress and development trend of extrapolation method in electromechanical equipment load spectrum[J]. Journal of Jilin University,2023,53(4):941-953.
[23] 赵泓荀,杨兆军,陈传海,等. 考虑参数权重的数控机床电主轴加速试验优化设计[J]. 吉林大学学报,2022,52(2):409-416. ZHAO Hongxun,YANG Zhaojun,CHEN Chuanhai,et al. Optimal design of acceleration test of motorized spindle of numerical control machine tool considering parameter weight[J]. Journal of Jilin University,2022,52(2):409-416.
[24] ZHAO Hongxun,YANG Zhaojun,CHEN Chuanhai,et al. Optimal design of ladder-stress accelerated degradation test plan for motorized spindle in non-cube test area[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):4431-4453.
[25] ZHU Dong,YANG Zhaojun,CHEN Chuanhai,et al. Compilation of program-loading spectrum for milling of a motorized spindle based on cutting force model[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2019,41(4),187.
[26] ZHAO Hongxun,YANG Zhaojun,CHEN Chuanhai,et al. Optimization design of step stress accelerated degradation test for motorized spindle based on Ds-optimality[J]. Applied Sciences-Basel,2021,11(9):3832.
[27] 潘凯,梁医,冯虎田,等. 基于疲劳加速寿命试验的滚动直线导轨副寿命评价[J]. 组合机床与自动化加工技术,2021,567(5):38-42,46. PAN Kai,LIANG Yi,FENG Hutian,et al. Life evaluation of rolling linear guide based on fatigue accelerated life test[J]. Modular Machine Tool & Automatic Manufacturing Technique,2021,567(5):38-42,46.
[28] YANG Zhaojun,HE Jialong,WANG Jian,et al. Bayesian method to solve the early failure period of numerical control machine tool[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,2018,232(9):1677-1686.
[29] 何佳龙,赵新跃,李国发,等. 一种便携式数控装备综合性能检测、分析平台及分析方法:CN201910879697.7[P]. 2021-03-23. HE Jialong,ZHAO Xinyue,LI Guofa,et al. A portable CNC equipment comprehensive performance testing and analysis platform and analysis method:201910879697.7[P]. 2021-03-23.
[30] ZHU Bin,WANG Liping,WU Jun. Optimal design of loading device based on a redundantly actuated parallel manipulator[J]. Mechanism and Machine Theory,2022,178:105084.
[31] 刘红艺,樊锐,郭江真,等. 面向数控机床可靠性试验的多维力随动加载装置[J]. 中国机械工程,2020,31(13):1606-1612. LIU Hongyi,FAN Rui,GUO Jiangzhen. Muti-axis loading device for reliability tests of CNC machine tools[J]. China Mechanical Engineering,2020,31(13):1606-1612.
[32] ZHONG Yuan,LI Guofa,CHEN Chuanhai,et al. Reliability allocation method based on 2-tuple linguistic weighted muirhead mean operator and 2-tuple linguistic best-worst method[J]. IEEE Transactions on Reliability,2022:1-10.
[33] 杨兆军,郝庆波,陈菲,等. 基于区间分析的数控机床可靠性模糊综合分配方法[J]. 北京工业大学学报,2011,37(3):321-329. YANG Zhaojun,HAO Qingbo,CHEN Fei. A comprehensive fuzzy reliability allocation method of NC machine tools based on interval analysis[J]. Journal of Beijing University of Technology,2011,37(3):321-329.
[34] 王继利. 基于可靠性分配与预计的高速精密冲压机床可靠性增长设计[D]. 长春:吉林大学,2014. WANG Jili. Reliability growth design of high-speed precision press based on reliability allocation and prediction[D]. Changchun:Jilin University,2014.
[35] 朱晓翠. 基于灰色理论的数控机床可靠性及维修性分析技术[D]. 长春:吉林大学,2013. ZHU Xiaocui. Study on reliability and maintainability analysis of CNC machine tools based on grey system theory[D]. Changchun:Jilin University,2013.
[36] 王晓林,黄正华,张维,等. 机床设计手册-机床现代设计卷(下册)[M]. 北京:机械工业出版社, 2021. WANG Xiaolin,HUANG Zhenghua,ZHANG Wei,et al. Machine tool design manual-modern machine tool design volume (Volume 2)[M]. Beijing:China Machine Press,2021.
[37] 张根保,柳剑,王国强. 基于任务的数控机床模糊可靠性分配方法[J]. 计算机集成制造系统,2012,18(4):768-774. ZHANG Genbao,LIU Jian,WANG Guoqiang. Fuzzy reliability allocation of CNC machine tools based on task[J]. Computer Integrated Manufacturing Systems,2012,18(4):768-774.
[38] 赵永胜,丁紫远,杨聪彬,等. 直觉梯形模糊数与熵权-TOPSIS的可靠性分配[J]. 组合机床与自动化加工技术,2022(1):76-80+84. ZHAO Yongsheng,DING Ziyuan,YANG Congbin,et al. Intuitive trapezoidal fuzzy number with entropy weight-Reliability allocation of TOPSIS[J]. Modular Machine Tool & Automatic Manufacturing Technique,2022(1):76-80+84.
[39] CHENG Qiang,KANG Yongbo,YANG Congbin,et al. A new reliability allocation method for machine tools based on ITrFNs and AHP-GRA[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):4019-4032.
[40] CHENG Qiang,WANG Chang,SUN Dongyang,et al. A new reliability allocation method for machine tools using the intuitionistic trapezoidal fuzzy numbers and TOPSIS[J]. International Journal of Advanced Manufacturing Technology,2023,124(11-12):3689-3700.
[41] 范晋伟,刘会普,秦池,等. 基于改进模糊——熵权数控磨床可靠性分配优化研究[J]. 制造业自动化,2022,44(11):109-113,140. FAN Jinwei,LIU Huipu,QIN Chi,et al. System reliability allocation and optimization of CNC grinder based on improved fuzzy-entropy weight[J]. Manufacturing automation,2022,44(11):109-113,140.
[42] 张义民,贾敬存,黄贤振. 基于数控机床故障信息的可靠性模糊分配[J]. 东北大学学报,2015,36(2):245-249. ZHANG Yimin,JIA Jingcun,HUANG Xianzhen. Fuzzy allocation of reliability based on the fault information of CNC machine tools[J]. Journal of Northeastern University,2015,36(2):245-249.
[43] 杨庆东,李阿为. 基于层次分析法和熵权系数法的数控机床可靠性分配[J]. 北京信息科技大学学报,2015,30(6):1-6. YANG Qingdong,LI Awei. Reliability allocation of CNC machine based on analysis hierarchy process and entropy weight coefficient method[J]. Journal of Beijing Information Science & Technology University,2015,30(6):1-6.
[44] 张玉刚,孙杰,喻天翔. 考虑不同失效相关性的系统可靠性分配方法[J]. 机械工程学报,2018,54(24):206-215. ZHANG Yugang,SUN Jie,YU Tianxiang. System reliability allocation method considering different failure correlations[J]. Journal of Mechanical Engineering,2018,54(24):206-215.
[45] 吉林大学. 数控机床可靠性动态数据库及信息处理系统[CP]. 2016SR027291. 2016-02-04. JILIN University. Dynamic database and information processing system for reliability of CNC machine tools[CP]. 2016SR027291. 2016-02-04.
[46] 张根保,冉琰. 可靠性数据管理[J]. 制造技术与机床,2015(12):5-10. ZHANG Genbao,RAN Yan. Reliability data management[J]. Manufacturing Technology & Machine Tool,2015(12):5-10.
[47] ZHOU Xinda,YANG Zhaojun,TIAN Hailong,et al. Reliability optimization design of hydraulic system considering oil contamination[J]. Journal of Mechanical Science and Technology,2020,34(12):5041-5051

数控机床可靠性技术新进展

Recent Progress in Reliability Technology of CNC Machine Tools

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	俞水, 吴晓, 郭鹏, 王志华. 基于首次穿越PDF自适应估计的时变可靠性分析方法[J]. 机械工程学报, 2024, 60(5): 264-275.
[2]	李莹, 张嘉方, 张钊墉, 王鑫丞, 张晋, 孔祥东. 斜盘式轴向柱塞泵柱塞颈部最小直径设计[J]. 机械工程学报, 2024, 60(4): 430-437.
[3]	钱萍, 刘鑫雨, 陈文华, 王哲, 郭明达. 电连接器用聚氨酯胶密封件贮存可靠性建模[J]. 机械工程学报, 2024, 60(20): 361-371.
[4]	韦新鹏, 姚中洋, 宝文礼, 张哲, 姜潮. 一种基于主动学习克里金模型的证据理论可靠性分析方法[J]. 机械工程学报, 2024, 60(2): 356-368.
[5]	王文林, 张子波, 李英子, 吴永明, 王起新, 梁若霜. 液压缸可靠性试验与数据分析研究平台[J]. 机械工程学报, 2024, 60(18): 385-393.
[6]	杨旭锋, 程鑫, 刘泽清. 一种融合交叉熵自适应抽样与ALK模型的可靠性分析方法[J]. 机械工程学报, 2024, 60(16): 73-82.
[7]	胡俊宇, 韩旭, 陶友瑞, 李珊瑚, 张建宁. 一种考虑跟随误差的S形轨迹残余振动抑制可靠性分析方法[J]. 机械工程学报, 2024, 60(16): 390-399.
[8]	胡伟飞, 廖家乐, 郭云飞, 鄢继铨, 李光, 岳海峰, 谭建荣. 基于物理信息神经网络的时变可靠性分析方法[J]. 机械工程学报, 2024, 60(13): 141-153.
[9]	张显程, 谷行行, 刘宇, 王润梓, 宋鲁凯, 谢里阳, 赵丙峰, 夏侯唐凡, 李勇, 孙莉, 温建锋, 涂善东. 基于工程损伤理论的高温装备可靠性评估与运维管理[J]. 机械工程学报, 2024, 60(13): 154-172.
[10]	常琦, 周长聪, 刘付超, 张浩, 岳珠峰. 考虑铰接间隙区间不确定性的飞机舱门锁机构可靠性分析[J]. 机械工程学报, 2023, 59(8): 264-272.
[11]	范小宁, 王凯, 余畅. 基于约束边界抽样的起重机金属结构可靠性优化[J]. 机械工程学报, 2023, 59(8): 288-298.
[12]	宋守许, 庞少聪, 周丹, 田永廷. 考虑可靠性与回收再利用性的直流充电桩设计过程关键部件识别方法[J]. 机械工程学报, 2023, 59(7): 18-28.
[13]	杨强, 孙本奇, 李树军, 戴建生. 面向构态切换稳定性的约束变胞机构可靠性优化设计方法[J]. 机械工程学报, 2023, 59(3): 22-37.
[14]	葛雪峰, 姜佳宝, 赵耀. 金属化膜电容器电热仿真分析^*[J]. 电气工程学报, 2023, 18(3): 224-231.
[15]	张涵寓, 宋周洲, 刘钊, 朱平. 碳纤维复合材料与铝合金胶铆混合连接力学性能可靠性研究[J]. 机械工程学报, 2023, 59(24): 334-343.