滚刀振动切削岩石动力学特性

doi:10.3901/JME.2022.07.152

摘要/Abstract

摘要： 为深入研究滚刀振动切削岩石动力学特性，开展了滚刀与岩石互作用力特性以及振动引入对滚刀切削破岩影响的分析，实验结果表明：切削破碎载荷呈近似的刚度双折线特征，滚刀与岩石之间存在弱接触和局部切削行为，适当的振动引入可以明显地提高滚刀切削破岩效率和降低滚刀扭矩。进而，基于弹簧、阻尼、质量块以及滑动器建立了滚刀振动切削岩石动力学模型，构建了包含滚刀与岩石之间五种相互作用形式的连续无量纲方程组，运用四阶龙格-库塔法求解微分方程组，获得了不同参数组合下系统的分岔图、速度、位移、庞加莱截面和相空间轨迹等，结合实验研究表明：所建立的动力学模型能够较好地重现滚刀振动切削岩石过程；破岩系统主要存在周期和混沌运动状态，混沌运动时破岩系统相空间轨迹杂乱，相轨迹没有确定的形状周期，位移和速度随时间变化也没有明显规律，破岩效率一般较低；当静态力、激振力幅值以及激振频率改变时，系统的运动状态和岩石破碎效率也随之发生变化，分析滚刀速度分岔图、岩石破碎位移获得了给定条件下静态力、激振力幅值以及激振频率的较优范围，它们对应的系统运动状态总是为P-1-I-1-Pr-1（滚刀在一个激振周期内碰撞岩石一次，且阶跃性破碎岩石一次）。

关键词: 振动切削, 岩石破碎, 动力学模型, 运动状态, 较优参数

Abstract: To investigate the dynamic characteristics of rock cutting by vibrational disc cutter deeply, the effect of vibration application on rock cutting performance and the interacted force between rock and disc cutter are investigated through experiments, and the results show: the rock cutting force presents approximatively double broken line feature of contact stiffness; there are weak contact and local cutting behaviour between rock and disc cutter; the reasonable vibration application can improve cutting efficiency of disc cutter and reduce cutting torque distinctly. Further, the dynamic model of rock cutting by vibrational disc cutter is developed using spring, damp, mass and slider elements, and the continuous-dimensionless equations including five interaction statuses between disc cutter and rock are established. The bifurcation diagram, velocity, displacement, Poincare section and phase diagram under different conditions are obtained by solving the differential equations, which can conclude some results with experiments: the developed dynamic model can well reappear the rock cutting process by vibrational disc cutter; the cutting system mainly including periodic and chaos motions, the phase diagram, velocity and displacement of cutting system under chaos motion are irregular, and its rock breakage efficiency is generally low; the motion state and rock breakage efficiency alter with the variation of static force, dynamic force amplitude and vibration frequency accordingly; the optimal ranges of static force, dynamic force amplitude and vibration frequency can be obtained according to bifurcation diagram and rock breakage displacement, and the corresponding states of cutting system are always P-1-I-1-Pr-1 (one impact between disc cutter and rock in one period, and rock step-breakage once).

Key words: vibrational cutting, rock breakage, dynamic model, motion state, optimal parameters

中图分类号:

TP113.1

江红祥, 刘送永, 蔡芝源. 滚刀振动切削岩石动力学特性[J]. 机械工程学报, 2022, 58(7): 152-165.

JIANG Hongxiang, LIU Songyong, CAI Zhiyuan. Dynamic Characteristic of Rock Cutting by Vibrational Disc Cutter[J]. Journal of Mechanical Engineering, 2022, 58(7): 152-165.

参考文献

[1] WU Zhijun,ZHANG Penglin,FAN Lifeng,et al. Numerical study of the effect of confining pressure on the rock breakage efficiency and fragment size distribution of a TBM cutter using a coupled FEM-DEM method[J]. Tunnelling& Underground Space Technology,2019,88:260-275.
[2] 林赉贶,夏毅敏,贾连辉,等. TBM边缘滚刀组合破岩特性及其影响因素敏感性评价[J]. 机械工程学报,2018,54(1):18-26. LIN Laikuang,XIA Yimin,JIA Lianhui,et al. Rock-breaking characteristics of TBM gage disc cutters and sensitivity analysis of their influencing factors[J]. Journal of Mechanical Engineering,2018,54(1):18-26.
[3] 刘泉声,刘建平,时凯,等. 评价岩石脆性指标对滚刀破岩效率的影响[J]. 岩石力学与工程学报,2016,35(3):498-510. LIU Quansheng,LIU Jianping,SHI Kai,et al. Evaluation of rock brittleness indexes on rock fragmentation efficiency by disc cutter[J]. Chinese Journal of Rock Mechanics and Engineering,2016,35(3):498-510.
[4] RAMEZANZADEH A,HOOD M. A state-of-the-art review of mechanical rock excavation technologies[J]. International Journal of Mining & Environmental Issues,2010,1(1):29-39.
[5] GENG Qi,WEI Zhengying,MENG Hao,et al. Free-face-assisted rock breaking method based on the multi-stage tunnel boring machine (TBM) cutterhead[J]. Rock Mechanics and Rock Engineering,2016,49(11):4459-4472.
[6] ZHANG Xuhui,XIA Yimin,ZENG Guiying,et al. Numerical and experimental investigation of rock breaking method under free surface by TBM disc cutter[J]. Journal of Central South University,2018,25(9):2107-2118.
[7] ZHANG Xuhui,XIA Yimin,TAN Qing,et al. Comparison study on the rock cutting characteristics of disc cutter under free-face-assisted and conventional cutting methods[J]. KSCE Journal of Civil Engineering,2018,22(10):4155-4162.
[8] XIA Yimin,GUO Ben,CONG Guoqiang,et al. Numerical simulation of rock fragmentation induced by a single TBM disc cutter close to a side free surface[J]. International Journal of Rock Mechanics and Mining Sciences,2017,91:40-48.
[9] GRAFF K. Application of sonic power to rock cutting[J]. Gas Engineering and Management,1973,24(6):28-33.
[10] BURTON R,UKRAINETZ P. Frozen soil cutting using vibratory blades[J]. SAE Transactions,1977:2113-2119.
[11] 辛丽丽,李传琦,梁继辉,等. 考虑分段土壤作用力的振动减阻分析[J]. 农业机械学报,2014,45(2):136-140. XIN Lili,LI Chuanqi,LIANG Jihui,et al. Vibrating drag reduction considering acting force of piecewise soil[J]. Transactions of the Chinese Society for Agricultural Machinery,2014,45(2):136-140.
[12] RAZZAGHI E. Vibratory soil cutting a new approach for the mathematical analysis[J]. Soil & Tillage Research,2016,159:33-40.
[13] HOOD M,ALEHOSSEIN H. A development in rock cutting technology[J]. International Journal of Rock Mechanics and Mining Sciences,2000,(37):297-305.
[14] KAREKAL S. Oscillating disc cutting technique for hard rock excavation[C]//47th US Rock Mechanics Geomechanics Symposium,June 23-26,2013,San Francisco,California. ARMA,2013:2395-2402.
[15] KOVALYSHEN Y. Analytical model of oscillatory disc cutting[J]. International Journal of Rock Mechanics and Mining Sciences,2015,77:378-383.
[16] JIANG Hongxiang,HU Zhengwei,LIU Songyong. Vibrating type hard rock cutting mechanism with function of directional high-speed abrasive jet advanced slitting:USA,US10895153(B2)[P]. 2021-01-19.
[17] DEHKHODA S,DETOURNAY E. Mechanics of actuated disc cutting[J]. Rock Mechanics and Rock Engineering,2017,50:465-483.
[18] DEHKHODA S,DETOURNAY E. Rock cutting experiments with an actuated disc[J]. Rock Mechanics and Rock Engineering,2019,52:3443-3458.
[19] 刘春生,李德根,袁昊. 碟盘刀具振动切削煤岩的理论力学模型与载荷特性[J]. 煤炭学报,2020,45(8):3015-3023. LIU Chunsheng,LI Degen,YUAN Hao. Theoretical mechanical model and load characteristics of coal and rock vibration cutting with disc[J]. Journal of China Coal Society,2020,45(8):3015-3023.
[20] MURO T,TRAN D. Regression analysis of the characteristics of vibro-cutting blade for tuffaceous rock[J]. Journal of Terramechanics,2003,40(3):91-219.
[21] PAVLOVSKAIA E,WIERCIGROCH M,GREBOGI C. Modeling of an impact system with a drift[J]. Physical Review E,2001,64(5):056224.
[22] PAVLOVSKAIA E,HENDRY D,WIERCIGROCH M. Modelling of high frequency vibro-impact drilling[J]. International Journal of Mechanical Sciences,2015,91:110-119.
[23] DEPOUHON A, DENOËL V, DETOURNAY E. Numerical simulation of percussive drilling[J]. International Journal for Numerical and Analytical Methods in Geomechanics,2015,39(8):889-912.
[24] 廖茂林. 基于钻头-岩石碰撞的激振冲击系统的非线性动力学研究[J]. 机械工程学报,2020,56(21):121-130. LIAO Maolin. Nonlinear dynamics of a vibro-impact system for indenter-rock interaction[J]. Journal of Mechanical Engineering,2020,56(21):121-130.
[25] 李玲,王晶晶,裴喜永,等. 机械结合面接触刚度建模新方法[J]. 机械工程学报,2020,56(9):162-168. LI Ling,WANG Jingjing,PEI Xiyong,et al. A new method for modeling mechanical joint surface contact stiffness. Journal of Mechanical Engineering,2020,56(9):162-168.
[26] 蔡芝源,江红祥. 潜孔锤破岩系统动力学特性研究[J]. 振动与冲击,2020,39(1):62-69. CAI Zhiyuan,JIANG Hongxiang. Dynamic characteristics of rock crushing system with DTH hammer[J]. Journal of Vibration and Shock,2020,39(1):62-69.