• CN:11-2187/TH
  • ISSN:0577-6686

›› 2001, Vol. 37 ›› Issue (7): 12-14.

• 论文 • 上一篇    下一篇

扫码分享

紊流流体管路分段集中参数键图模型研究

阎世敏;陈照第;李洪人   

  1. 哈尔滨工业大学机电工程学院
  • 发布日期:2001-07-15

STUDY ON A SECTIONAL LUMPED PARAMETER MODEL USING BOND GRAPHS FOR TURBULENT PIPELINES

Yan Shimin;Chen Zhaodi;Li Hongren   

  1. Harbin Institute of Technology
  • Published:2001-07-15

摘要: 对传统管路分段集中参数模型进行修正,通过引进动摩擦液阻,提出了适用于紊流管路的分段集中参数键图模型。仿真曲线和试验曲线吻合较好,表明所提出的管路模型具有足够的精度。该模型结构简单,计算参数少,适合于复杂管路系统的建模分析。

关键词: 动摩擦液阻, 分段集中参数模型, 键图, 紊流管路, 弹性微凸体平均压强, 低速滑动界面, 动摩擦系数, 法向接触刚度, 总应变

Abstract: Based on the improvement on the conventional sectional lumped parameter bond graph and introduction of the kinetic friction factor, a new sectional lumped parameter model using bond graphs for turbulent line is worked out. Experimental results showed that the goodness of identity between the simulation curves and the experimental curves is comparatively ideal, Which implies that the new model has adequate accuracy. The new model has less calculated parameters, simpler structure, and is suitable for modeling complex line systems.

Key words: Bond graphs, Kinetic friction factor, Sectional parameter model, Turbulent line, average pressure at an elastic microcontact, kinetic friction coefficient, normal contact stiffness, total strain, slow sliding surface

中图分类号: