• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (18): 370-378.doi: 10.3901/JME.260555

• 材料科学与工程 • 上一篇    

扫码分享

考虑界面滑移及机械载荷的搅拌摩擦焊接热-力耦合分析模型

聂林1, 贺地求2, 雷文3, 陈道云1, 肖乾1, 赵龙志1   

  1. 1. 华东交通大学机电与车辆工程学院 南昌 330013;
    2. 中南大学机电工程学院 长沙 410083;
    3. 中国中车株洲电力机车有限公司 株洲 412001
  • 收稿日期:2026-02-11 修回日期:2026-06-07 发布日期:2026-11-20
  • 作者简介:聂林,男,1990年出生,博士,副教授,硕士研究生导师。主要研究方向为焊接结构力学及多尺度数值模拟。E-mail:nielin@ecjtu.edu.cn;赵龙志(通信作者),男,1977年出生,博士,教授,博士研究生导师。主要研究方向为高性能合金及其复合材料、激光表面工程和增材制造技术、非均质材料特种连接技术。E-mail:zhaolongzhi@163.com
  • 基金资助:
    江西省自然科学基金(20242BAB20205,20252BAC210001)和江西省教育厅科学技术研究(GJJ2400508)资助项目。

Coupled Thermomechanical Model for Friction Stir Welding Incorporating Interfacial Slip and Mechanical Loads

NIE Lin1, HE Diqiu2, LEI Wen3, CHEN Daoyun1, XIAO Qian1, ZHAO Longzhi1   

  1. 1. School of Mechatronics and Vehicle Engineering, East China Jiaotong University, Nanchang 330013;
    2. School of Mechanical and Electronic Engineering, Central South University, Changsha 410083;
    3. CRRC Zhuzhou Electric Locomotive Co., Ltd., Zhuzhou 412001
  • Received:2026-02-11 Revised:2026-06-07 Published:2026-11-20

摘要: 搅拌摩擦焊接过程固有的固相温度维持特性是保证高质量连接的关键,然而传统热-力耦合模型对该特性的描述仍有待完善。为此,建立了一个综合考虑界面接触、材料流变与机械载荷交互作用的热-力耦合模型。该模型通过建立滑移率与工艺参数之间的定量关系以表征界面摩擦接触行为,并引入与应变率及温度相关的J-C本构方程表征2219铝合金的塑性流变,同时还耦合了搅拌头机械载荷及工艺参数等影响因素,进而通过热-力动态平衡反馈实现了对固相温度维持特性的合理描述。基于所建模型对2219-T8铝合金搅拌摩擦焊接过程的温度场及残余应力场进行了数值模拟,并通过热电偶测温与残余应力测试验证模型准确性。结果表明:模拟得到的焊接温度峰值与试验测量结果相对误差小于10%,并准确模拟了搅拌摩擦焊接的固相温度维持过程;模拟结果有效预测了焊接残余应力的非对称分布特征,不对称度约为17%,且残余应力峰值预测误差降低至8%;揭示了机械载荷对残余应力场的影响关系:搅拌头扭矩是导致残余应力不对称分布的关键因素,而忽略搅拌头下压力将造成残余应力峰值预测被高估约25%。

关键词: 搅拌摩擦焊接, 热-力耦合模型, 滑移率, 机械载荷, 固相温度

Abstract: The inherent solid-state temperature stability in friction stir welding (FSW) is crucial for producing high-quality joints. However, its description by conventional coupled thermomechanical models remains to be improved. This study developed an enhanced model that integrates the interactions among interfacial contact, material flow, and mechanical loading. The model characterizes the interfacial friction behavior by establishing a quantitative relationship between the slip rate and process parameters. The plastic flow of the 2219 aluminum alloy is characterized using a strain rate- and temperature-dependent Johnson-Cook (J-C) constitutive equation. Furthermore, the effects of tool mechanical loads and process parameters are coupled. The solid-state temperature stability is rationally described through a thermomechanical dynamic balance feedback process. Numerical simulations of the temperature and residual stress fields during FSW of 2219-T8 aluminum alloy were conducted using the developed model. The accuracy of the model was verified through temperature measurements and residual stress tests. The results show that:The relative error between the simulated peak welding temperature and experimental measurements is less than 10%, and the solid-state temperature stability of FSW is accurately captured; The asymmetric distribution of weld residual stress is effectively predicted, with an asymmetry degree of approximately 17%, and the prediction error of the peak residual stress is reduced to 8%; Further analysis reveals the influence of mechanical loading on the residual stress field:the tool torque is the key factor responsible for the asymmetric stress distribution, while neglecting the axial force leads to an overestimation of the peak residual stress by approximately 25%.

Key words: friction stir welding, coupled thermomechanical model, slip rate, mechanical loads, solid-state temperature

中图分类号: