电弧增材制造装备系统与应用的发展现状

doi:10.3901/JME.2025.06.092

摘要/Abstract

摘要： 电弧增材制造技术作为一种低能耗、可持续的绿色制造技术，极为适合大型复杂构件的低成本、高效制造。然而，复杂结构和高性能构件的制造需求对电弧增材制造装备系统提出了很大的挑战。目前，电弧增材制造装备系统的成形精度、质量以及稳定性限制了其进一步发展和应用。阐述电弧增材制造的技术原理，从机构自由度、成形精度和质量、成形效率以及热输入控制等方面总结了电弧增材制造装备系统的发展现状，并结合电弧增材制造技术在工业制造领域的应用实例探讨其广阔的应用前景，最后展望该领域未来的发展方向。通过对装备系统与应用进展的阶段性总结，旨在促进电弧增材制造的进一步工业化应用。

关键词: 电弧增材制造, 机构自由度, 成形质量, 成形效率, 热输入

Abstract: As a low-energy, sustainable green manufacturing technology, wire arc additive manufacturing (WAAM) technology is very suitable for low-cost and high-efficiency manufacturing of large and complex components. However, the manufacturing requirements of complex structures and high-performance components pose great challenges to the WAAM equipment system. At present, the forming accuracy, quality and stability of the WAAM equipment system limit its further development and application. The technical principles of WAAM are expounded. The development status of WAAM equipment system is summarized from the aspects of mechanism freedom, forming precision and quality, forming efficiency and heat input control. Combined with the application examples of WAAM technology in the industrial manufacturing, its broad application prospects are discussed. Finally, the future development direction of this field is prospected. By summarizing the equipment systems and applications, the aim is to promote further industrial applications of WAAM.

Key words: wire arc additive manufacturing, mechanism freedom, forming quality, forming efficiency, heat input

中图分类号:

杜心伟, 魏艳红, 沈泳华, 赵文勇, 刘仁培. 电弧增材制造装备系统与应用的发展现状[J]. 机械工程学报, 2025, 61(6): 92-102.

DU Xinwei, WEI Yanhong, SHEN Yonghua, ZHAO Wenyong, LIU Renpei. Development Status of Wire Arc Additive Manufacturing Equipment System and Application[J]. Journal of Mechanical Engineering, 2025, 61(6): 92-102.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2025.06.092

http://www.cjmenet.com.cn/CN/Y2025/V61/I6/92

参考文献

[1] 柳百成. 创新·强基·智能——建设制造强国[J]. 中国机械工程，2020，31(1)：13-18. LIU Baicheng. Innovation，fundamentals，intelligence-for strong manufacturing industry[J]. China Mechanical Engineering，2020，31(1)：13-18.
[2] DEBROY T，WEI H L，ZUBACK J S，et al. Additive manufacturing of metallic components-process，structure and properties[J]. Progress in Materials Science，2018，92：112-224.
[3] 熊江涛，耿海滨，林鑫，等. 电弧增材制造研究现状及在航空制造中应用前景[J]. 航空制造技术，2015(Z2)：80-85. XIONG Jiangtao，GENG Haibin，LIN Xin，et al. Research status of wire and arc additive manufacture and its application in aeronautical manufacturing[J]. Aeronautical Manufacturing Technology，2015(Z2)：80-85.
[4] BLAKEY-MILNER B，GRADL P，SNEDDEN G，et al. Metal additive manufacturing in aerospace：A review[J]. Materials & Design，2021，209：110008.
[5] TOMAR B，SHIVA S，NATH T. A review on wire arc additive manufacturing：Processing parameters，defects，quality improvement and recent advances[J]. Materials Today Communications，2022，31：103739.
[6] 余圣甫，禹润缜，何天英，等. 电弧增材制造技术及其应用的研究进展[J]. 中国材料进展，2021，40(3)：198-209. YU Shengfu，YU Runzhen，HE Tianying，et al. Wire arc additive manufacturing and its application：Research progress[J]. Materials China，2021，40(3)：198-209.
[7] DINOVITZER M，CHEN X，LALIBERTE J，et al. Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure[J]. Additive Manufacturing，2019，26：138-146.
[8] CUNNINGHAM C R，FLYNN J M，SHOKRANI A，et al. Invited review article：Strategies and processes for high quality wire arc additive manufacturing[J]. Additive Manufacturing，2018，22：672-686.
[9] XIA C，PAN Z，POLDEN J，et al. A review on wire arc additive manufacturing：Monitoring，control and a framework of automated system[J]. Journal of Manufacturing Systems，2020，57：31-45.
[10] RODRIGUES T A，DUARTE V，MIRANDA R M，et al. Current status and perspectives on wire and arc additive manufacturing(WAAM)[J]. Materials，2019，12(7)：1121.
[11] SINGH J，ARORA K S，SHUKLA D K. Dissimilar MIG-CMT weld-brazing of aluminium to steel：A review[J]. Journal of Alloys and Compounds，2019，783：753-764.
[12] ZHAO W，WEI Y，ZHANG X，et al. Comparative investigation of wire arc additive manufacturing of Al-5%Mg alloy with and without external alternating magnetic field[J]. The International Journal of Advanced Manufacturing Technology，2022，119：2571-2587.
[13] 马明亮，蔡之勇，郭纯，等. 铝合金CMT技术增材制造研究进展[J]. 铸造技术，2020，41(11)：1088-1090. MA Mingliang，CAI Zhiyong，GUO Chun，et al. Research progress in additive manufacturing of aluminum alloy CMT technology[J]. Foundry Technology，2020，41(11)：1088-1090.
[14] DUMAS C，CARO S，GARNIER S，et al. Joint stiffness identification of six-revolute industrial serial robots[J]. Robotics and Computer-Integrated Manufacturing，2011，27(4)：881-888.
[15] KAZANAS P，DEHERKAR P，ALMEIDA P，et al. Fabrication of geometrical features using wire and arc additive manufacture[J]. Proceedings of the Institution of Mechanical Engineers，Part B：Journal of Engineering Manufacture，2012，226(6)：1042-1051.
[16] DING D，PAN Z，CUIURI D，et al. A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)[J]. Robotics and Computer- Integrated Manufacturing，2015，31：101-110.
[17] DEREKAR K S，ADDISON A，JOSHI S S，et al. Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium[J]. The International Journal of Advanced Manufacturing Technology，2020，107(1-2)：311-331.
[18] ZHAO W，WEI Y，LONG J，et al. Modeling and simulation of heat transfer，fluid flow and geometry morphology in GMAW-based wire arc additive manufacturing[J]. Welding in the World，2021，65(8)：1571-1590.
[19] ALDALUR E，VEIGA F，SUáREZ A，et al. High deposition wire arc additive manufacturing of mild steel：Strategies and heat input effect on microstructure and mechanical properties[J]. Journal of Manufacturing Processes，2020，58：615-626.
[20] ZHANG Y，CHEN Y，LI P，et al. Weld deposition-based rapid prototyping：A preliminary study[J]. Journal of Materials Processing Technology，2003，135(2-3)：347-357.
[21] XIONG J，ZHANG G. Adaptive control of deposited height in GMAW-based layer additive manufacturing[J]. Journal of Materials Processing Technology，2014，214(4)：962-968.
[22] BENAKIS M，COSTANZO D，PATRAN A. Current mode effects on weld bead geometry and heat affected zone in pulsed wire arc additive manufacturing of Ti-6-4 and Inconel 718[J]. Journal of Manufacturing Processes，2020，60：61-74.
[23] 刘黎明，贺雅净，李宗玉，等. 不同路径下316不锈钢电弧增材组织和性能[J]. 焊接学报，2020，41(12)：13-19，97-98. LIU Liming，HE Yajing，LI Zongyu，et al. Research on microstructure and mechanical properties of 316 stainless steel fabricated by arc additive manufacturing in different paths[J]. Transactions of The China Welding Institution，2020，41(12)：13-19，97-98.
[24] MEREDDY S，BERMINGHAM M J，STJOHN D H，et al. Grain refinement of wire arc additively manufactured titanium by the addition of silicon[J]. Journal of Alloys and Compounds，2017，695：2097-2103.
[25] GENG H，LI J，XIONG J，et al. Optimization of wire feed for GTAW based additive manufacturing[J]. Journal of Materials Processing Technology，2017，243：40-47.
[26] DONG B，CAI X，LIN S，et al. Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy：Microstructures and mechanical properties[J]. Additive Manufacturing，2020，36：101447.
[27] MERCADO ROJAS J G，WOLFE T，FLECK B A，et al. Plasma transferred arc additive manufacturing of Nickel metal matrix composites[J]. Manufacturing Letters，2018，18：31-34.
[28] FENG Y，ZHAN B，HE J，et al. The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel[J]. Journal of Materials Processing Technology，2018，259：206-215.
[29] WANG C，SUDER W，DING J，et al. The effect of wire size on high deposition rate wire and plasma arc additive manufacture of Ti-6Al-4V[J]. Journal of Materials Processing Technology，2021，288：116842.
[30] WANG L，ZHANG Y，HUA X，et al. Fabrication of γ-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process：Microstructure evolution and mechanical properties[J]. Materials Science and Engineering：A，2021，812：141056.
[31] PANCHAGNULA J S，SIMHAMBHATLA S. Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing[J]. Robotics and Computer-Integrated Manufacturing，2018，49：194-203.
[32] YA W，HAMILTON K. On-demand spare parts for the marine industry with directed energy deposition：propeller use case[C]//Industrializing Additive Manufacturing- Proceedings of Additive Manufacturing in Products and Applications-AMPA20171. Springer International Publishing，2018：70-81.
[33] YUAN L，PAN Z，DING D，et al. Investigation of humping phenomenon for the multi-directional robotic wire and arc additive manufacturing[J]. Robotics and Computer-Integrated Manufacturing，2020，63：101916.
[34] COLEGROVE P A，COULES H E，FAIRMAN J，et al. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high- pressure rolling[J]. Journal of Materials Processing Technology，2013，213(10)：1782-1791.
[35] GU J，DING J，WILLIAMS S W，et al. The effect of inter- layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys[J]. Journal of Materials Processing Technology，2016，230：26-34.
[36] DUARTE V R，RODRIGUES T A，SCHELL N，et al. Hot forging wire and arc additive manufacturing (HF- WAAM)[J]. Additive Manufacturing，2020，35：101193.
[37] YANG Y，JIN X，LIU C，et al. Residual stress，mechanical properties，and grain morphology of Ti-6Al- 4V alloy produced by ultrasonic impact treatment assisted wire and arc additive manufacturing[J]. Metals，2018，8(11)：934.
[38] HU Y，CHEN F，CAO S，et al. Preparation and characterization of CMT wire arc additive manufacturing Al-5%Mg alloy depositions through assisted longitudinal magnetic field[J]. Journal of Manufacturing Processes，2023，101：576-588.
[39] WANG Y，CHEN X，SHEN Q，et al. Effect of magnetic field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing[J]. Journal of Manufacturing Processes，2021，64：10-19.
[40] WANG T，MAZáNOVá V，LIU X. Ultrasonic effects on gas tungsten arc based wire additive manufacturing of aluminum matrix nanocomposite[J]. Materials & Design，2022，214：110393.
[41] CHEN Y，XU M，ZHANG T，et al. Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing[J]. Journal of Alloys and Compounds，2022，910：164957.
[42] SONG Y A，PARK S，CHOI D，et al. 3D welding and milling：Part I-a direct approach for freeform fabrication of metallic prototypes[J]. International Journal of Machine Tools and Manufacture，2005，45(9)：1057-1062.
[43] KARUNAKARAN K P，SURYAKUMAR S，PUSHPA V，et al. Low cost integration of additive and subtractive processes for hybrid layered manufacturing[J]. Robotics and Computer-Integrated Manufacturing，2010，26(5)：490-499.
[44] LI F，CHEN S，SHI J，et al. Evaluation and optimization of a hybrid manufacturing process combining wire arc additive manufacturing with milling for the fabrication of stiffened panels[J]. Applied Sciences，2017，7(12)：1233.
[45] 张海鸥，黄丞，李润声，等. 高端金属零件微铸锻铣复合超短流程绿色制造方法及其能耗分析[J]. 中国机械工程，2018，29(21)：2553-2558. ZHANG Haiou，HUANG Cheng，LI Runsheng，et al. A super short-process green manufacturing method and energy consumption analysis of micro casting forging and milling for high performance parts[J]. China Mechanical Engineering，2018，29(21)：2553-2558.
[46] WIPPERMANN A，GUTOWSKI T G，DENKENA B，et al. Electrical energy and material efficiency analysis of machining，additive and hybrid manufacturing[J]. Journal of Cleaner Production，2020，251：119731.
[47] MARTINA F，DING J，WILLIAMS S，et al. Tandem metal inert gas process for high productivity wire arc additive manufacturing in stainless steel[J]. Additive Manufacturing，2019，25：545-550.
[48] 刘齐，张萌，付乐琪，等. 原位合金化双丝电弧增材制造γ-TiAl组织性能研究[J]. 稀有金属材料与工程，2020，49(11)：3919-3924. LIU Qi，ZHANG Meng，FU Leqi，et al. Microstructure and properties of γ-tial fabricated by in-situ alloying assisted double-wire arc additive manufacturing[J]. Rare Metal Materials and Engineering，2020，49(11)：3919-3924.
[49] QI Z，CONG B，QI B，et al. Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys[J]. Journal of Materials Processing Technology，2018，255：347-353.
[50] GENG H，LI J，XIONG J，et al. Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy[J]. Science and Technology of Welding and Joining，2016，22(6)：472-483.
[51] ROSLI N A，ALKAHARI M R，ABDOLLAH M F B，et al. Review on effect of heat input for wire arc additive manufacturing process[J]. Journal of Materials Research and Technology，2021，11：2127-2145.
[52] FOSTER B K，BEESE A M，KEIST J S，et al. Impact of interlayer dwell time on microstructure and mechanical properties of nickel and titanium alloys[J]. Metallurgical and Materials Transactions A，2017，48(9)：4411-4422.
[53] CHATURVEDI M，SCUTELNICU E，RUSU C C，et al. Wire arc additive manufacturing：Review on recent findings and challenges in industrial applications and materials characterization[J]. Metals，2021，11(6)：939.
[54] YANG D，HE C，ZHANG G. Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturing[J]. Journal of Materials Processing Technology，2016，227：153-160.
[55] LIU W，JIA C，GUO M，et al. Compulsively constricted WAAM with arc plasma and droplets ejected from a narrow space[J]. Additive Manufacturing，2019，27：109-117.
[56] JIA C，LIU W，CHEN M，et al. Investigation on arc plasma，droplet，and molten pool behaviours in compulsively constricted WAAM[J]. Additive Manufacturing，2020，34：101235.
[57] GUO M，JIA C，ZHOU J，et al. Investigating the generation process of molten droplets and arc plasma in the confined space during compulsively constricted WAAM[J]. Journal of Materials Processing Technology，2020，275：116355.
[58] WU B，PAN Z，DING D，et al. The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy[J]. Journal of Materials Processing Technology，2018，258：97-105.
[59] HACKENHAAR W，MAZZAFERRO J A E，MONTEVECCHI F，et al. An experimental-numerical study of active cooling in wire arc additive manufacturing[J]. Journal of Manufacturing Processes，2020，52：58-65.
[60] DA SILVA L J，SOUZA D M，DE ARAúJO D B，et al. Concept and validation of an active cooling technique to mitigate heat accumulation in WAAM[J]. The International Journal of Advanced Manufacturing Technology，2020，107(5-6)：2513-2523.
[61] LONG J，WANG M，ZHAO W，et al. High-power wire arc additive manufacturing of stainless steel with active heat management[J]. Science and Technology of Welding and Joining，2022，27(4)：256-264.
[62] SHI J，LI F，CHEN S，et al. Effect of in-process active cooling on forming quality and efficiency of tandem GMAW-based additive manufacturing[J]. The International Journal of Advanced Manufacturing Technology，2018，101(5-8)：1349-1356.
[63] LI F，CHEN S，SHI J，et al. Thermoelectric cooling-aided bead geometry regulation in wire and arc-based additive manufacturing of thin-walled structures[J]. Applied Sciences，2018，8(2)：207.
[64] WILLIAMS S W，MARTINA F，ADDISON A C，et al. Wire+arc additive manufacturing[J]. Materials Science and Technology，2016，32(7)：641-647.
[65] GRADL P R，GREENE S E，PROTZ C，et al. Additive manufacturing of liquid rocket engine combustion devices：a summary of process developments and hot-fire testing results[C]//2018 Joint Propulsion Conference. 2018：4625.
[66] BUCHANAN C，GARDNER L. Metal 3D printing in construction：A review of methods，research，applications，opportunities and challenges[J]. Engineering Structures，2019，180：332-348.
[67] RAMLAB. RAMLAB unveils world’s first class approved 3d printed ship’s propeller [EB/OL]. [2023-06-10].https://www.ramlab.com/updates/ramlab-unveils-worlds-first-class-approved-3d-printed-ships-propeller/.
[68] STEVENSON K. MX3D Completes 3D printed robot arm project[EB/OL]. [2023-06-10]. https://www.fabbaloo.com/2020/07/mx3d-3d-printed-robot-arm.
[69] GREER C，NYCZ A，NOAKES M，et al. Introduction to the design rules for metal big area additive manufacturing[J]. Additive Manufacturing，2019，27：159-166.
[70] DESHMUKH P S，KATIYAR A，SAHU A，et al. Wire arc additive manufacturing of commercially pure titanium bio-medical alloy[J]. Materials Today：Proceedings，2023，90：6-10.
[71] OMIYALE B O，OLUGBADE T O，ABIOYE T E，et al. Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications：A review[J]. Materials Science and Technology，2022，38(7)：391-408.
[72] LIU J，XU Y，GE Y，et al. Wire and arc additive manufacturing of metal components：A review of recent research developments[J]. International Journal of Advanced Manufacturing Technology，2020，111(1-2)：149-198.
[73] LI X，HAN Q，ZHANG G. Large-size sprocket repairing based on robotic GMAW additive manufacturing[J]. Welding in the World，2021，65(5)：793-805.
[74] SHEN Y，WEI Y，LIU R. A path generation method for wire and arc additive remanufacturing of complex hot forging dies[J]. The International Journal of Advanced Manufacturing Technology，2021，117：1935-1943.