等编码数字流量控制单元编码变换与控制方法

doi:10.3901/JME.2024.02.287

机械工程学报 ›› 2024, Vol. 60 ›› Issue (2): 287-301.doi: 10.3901/JME.2024.02.287

扫码分享

等编码数字流量控制单元编码变换与控制方法

王佩¹, 程雨旺¹, 李新浩¹, 姚静^1,2,3, 吴柳杰^1,4

1. 燕山大学机械工程学院秦皇岛 066004;
2. 燕山大学河北省重型机械流体动力传输与控制实验室秦皇岛 066004;
3. 先进制造成形技术及装备国家地方联合工程研究中心秦皇岛 066004;
4. 宁波赛福汽车制动有限公司宁波 315121

收稿日期:2023-01-07 修回日期:2023-09-05 出版日期:2024-01-20 发布日期:2024-04-09
通讯作者: 姚静(通信作者)，女，1978年出生，博士，教授，博士研究生导师。主要研究方向为流体传动与控制、数字液压和液压元件轻量化设计。E-mail：jyao@ysu.edu.cn
作者简介:王佩，女，1991年出生，博士研究生。主要研究方向为流体传动与控制。E-mail：wpei@stumail.ysu.edu.cn
基金资助:
国家自然科学基金(51975507)、河北省教育厅在读研究生创新能力培养(CXZZBS2022141)和河北省教育厅科学研究(QN2024237)资助项目。

Configuration Transformation and Flow Control of Equal-coded Digital Flow Control Unit

WANG Pei¹, CHENG Yuwang¹, LI Xinhao¹, YAO Jing^1,2,3, WU Liujie^1,4

1. School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004;
2. Hebei Provincial Key Laboratory of Heavy Fluid Power Transmission and Control, Yanshan University, Qinhuangdao 066004;
3. Advanced Manufacture Forming Technology and Equipment, Qinhuangdao 066004;
4. Ningbo Safe Brakes Systems Co., Ltd., Ningbo 315121

Received:2023-01-07 Revised:2023-09-05 Online:2024-01-20 Published:2024-04-09

摘要/Abstract

摘要： 基于并联数字阀的数字流量控制单元(Digital flow control unit，DFCU)是数字液压系统的核心控制部件，在编码开关控制下DFCU开关组合数量随编码位数呈指数增加，面临控制计算量大、流量分辨率受限的问题。因此，提出等编码DFCU编码变换方法，通过减少编码位数缩小最佳开关组合搜索空间，减少控制计算量，并设计基于代价函数的编码开关控制、脉冲宽度调制(Pulse width modulation，PWM)及其组合的多种控制器，提高流量分辨率保证控制精度。基于高速开关阀静态特性测试，拟合得到其流量-占空比-压力三者之间数学模型。以7-bit高速开关阀组成的等编码DFCU作为研究对象，利用不同高速开关阀数量的组合控制，变换为4-bit裴波那契编码和3-bit二进制编码，并分析编码变换前后的脉冲数调制(Pulse number modulation，PNM)、脉码调制(Pulse code modulation，PCM)、PWM及复合控制器的流量输出特性。试验结果从控制精度、计算量、切换次数的对比表明，DFCU在编码开关控制方式下以较少的启闭次数可实现离散流量有级输出，编码构型变换后可有效减少计算量，切换次数与冲击略有增多；PWM控制可实现近似连续的流量输出，但压力脉动和切换次数远高于编码开关控制；变换后的编码开关与PWM复合控制不仅提高了流量控制精度，可以实现与PWM控制精度基本一致的流量输出，且切换次数远小于PWM控制方式并可以减少控制周期内的计算量。

关键词: 数字流量控制单元, 脉冲数调制, 脉码调制, 脉冲宽度调制, 编码构型, 流量控制

Abstract: The digital flow control unit(DFCU) based on parallel on/off valves is the core component of digital hydraulics. The on/off combinations of DFCU increase exponentially with the coded bits under the coding-based on/off control, which faces the problems of large control calculations and limited flow resolution. Therefore, the coding transformation method of equal-coded DFCU is proposed by reducing the number of coded bits to narrow the search space for the best on/off combination and decrease the control calculation, The coding-based on/off control based on the cost function, pulse width modulation(PWM) control, and their compound controllers are designed to improve the flow resolution and ensure control accuracy. The mathematical model of flow-duty-pressure of the high-speed on-off valve is established by tests and fitting. The 7-bit equal-coded DFCU composed of high speed on/off valves is the research objective, which is converted to 4-bit Fibonacci-coded and 3-bit Binary-coded DFCU utilizing the combined control for different numbers of on/off valves and analyze the flow control characteristics under the designed pulse number modulation(PNM), pulse code modulation(PCM), PWM and compound controllers. The comparison results from control accuracy, calculation and switching numbers show that the DFCU can achieve the discrete flow output with less switching number under the coding-based on/off control, and the calculation can be effectively reduced after the coded configuration transformation, while the switching number and pressure shock are slightly increased; the PWM control can achieve the nearly continuous flow output, but the pressure pulsation and switching number are much higher than the coding on/off control; the transformed coding-based on/off control with PWM compound control not only improves the flow control accuracy similar to flow output of PWM control, and the switching number is much smaller than the PWM control and reduce the amount of computation in the control duty.

Key words: DFCU, PWM, PCM, PNM, coding configuration, flow control

中图分类号:

TH137

王佩, 程雨旺, 李新浩, 姚静, 吴柳杰. 等编码数字流量控制单元编码变换与控制方法[J]. 机械工程学报, 2024, 60(2): 287-301.

WANG Pei, CHENG Yuwang, LI Xinhao, YAO Jing, WU Liujie. Configuration Transformation and Flow Control of Equal-coded Digital Flow Control Unit[J]. Journal of Mechanical Engineering, 2024, 60(2): 287-301.

参考文献

[1] DONKOV V H, ANDERSEN T, LINJAMA M, et al. Digital hydraulic technology for linear actuation:A state of the art review[J]. International Journal of Fluid Power, 2020, 21(2):263-304.
[2] 杨华勇, 王双, 张斌, 等.数字液压阀及其阀控系统发展和展望[J].吉林大学学报, 2016, 46(5):1494-1505.
YANG Huayong, WANG Shuang, ZHANG Bin, et al. Development and prospect of digital hydraulic valve and valve control system[J]. Journal of Jilin University, 2016, 46(5):1494-1505.
[3] WINKLER B. Recent advances in digital hydraulic components and applications[C]//The Ninth Workshop on Digital Fluid Power. Aalborg, Denmark. 2017.
[4] ZHANG Q, KONG X, YU B, et al. Review and development trend of digital hydraulic technology[J]. Applied Sciences, 2020, 10(2):579.
[5] GAO Q, ZHU Y, WU C, et al. Development of a novel two-stage proportional valve with a pilot digital flow distribution[J]. Frontiers of Mechanical Engineering, 2021, 16(2):420-434.
[6] LINJAMA M. Digital fluid power:State of the art[C]//The 12th Scandinavian International Conference on Fluid Power, Tampere, Finland, 2011:18-20.
[7] 邱坤, 王康.基于并联开关阀技术的新型数字液压阀特性仿真[J].液压与气动, 2019, 329(1):85-89.
QIU Kun, WANG Kang.Characteristic simulation of new digital hydraulic valve based on parallel switch valve technology[J]. Chinese Hydraulics & Pneumatics, 2019, 329(1):85-89.
[8] LINJAMA M, VILENIUS M. Digital hydraulics-towards perfect valve technology[C]//The Tenth Scandinavian International Conference on Fluid Power. Finland, Tampere, May 21-23, 2007.
[9] LAAMANEN A, LINJAMA M, VILENIUS M. On the pressure peak minimization in digital hydraulics[C]//The Tenth Scandinavian International Conference on Fluid Power. 2007:107-121.
[10] LINJAMA M, VILENIUS M. Energy-efficient motion control of a digital hydraulic joint actuator[C]//Proceedings of the JFPS International Symposium on Fluid Power, 2005.
[11] 石延平.集成式PCM组合数字压力阀的设计和研究[J].液压与气动, 2003(7):40-42.
SHI Yanping. Design of the PCM combine digital pressure control valve with plug integration structure[J]. Chinese Hydraulics & Pneumatics, 2003(7):40-42.
[12] LINJAMA M, VILENIUS M. Improved digital hydraulic tracking control of water hydraulic cylinder drive[J]. International Journal of Fluid Power, 2005, 6(1):29-39.
[13] INOUE Y, TACHIBANA K, MAEKAWA S, et al. Energy regeneration method for hydraulic system by using PWM control:(Improvement of regeneration efficiency)[C]//Conference of Chugoku-shikoku Branch. The Japan Society of Mechanical Engineers, 2018:1104.
[14] MUTO T, YAMADA H, SUEMATSU Y. PWM-digital control of hydraulic actuator utilizing 2-way solenoid valves[J]. Chinese Hydraulics & Pneumatics, 1988, 19(7):564-571.
[15] STAUCH C, RUDOLPH J, SCHULZ F. Some aspects of modelling, dimensioning, and control of digital flow control units[C]//The Seventh Workshop on Digital Fluid Power, 2015.
[16] 姚静, 蒋东廷, 杨帅, 等.一种数字阀组PWM与PCM复合控制装置及其控制方法[P]. CN109441904A, 2019.
YAO Jing, JIANG Dongting, YANG Shuai, et al. A PWM and PCM compound control method of digital valves and its control device[P]. CN109441904A, 2019.
[17] PLÖCKINGER A, HUOVA M, SCHEIDL R. Simulation and experimental results of PWM control for digital hydraulics[C]//Proceedings of the Fifth Workshop on Digital Fluid Power, Tampere, 2012:133.
[18] PALONIITTY M, LINJAMA M, HUHTALA K. Equal coded digital hydraulic valve system-improving tracking control with pulse frequency modulation[J]. Procedia Engineering, 2015, 106:83-91.
[19] MUTO T, YAMADA H, SUEMATSU Y. Digital control of hydraulic actuator system operated by differential pulse width modulation[J]. JSME International Journal, 2008, 33(4):641-648.
[20] BELFORTE G, MAURO S, MATTIAZZO G. A method for increasing the dynamic performance of pneumatic servo systems with digital valves[J]. Mechatronics, 2004, 14(10):1105-1120.
[21] FERRARESI C. A new PCM-PWM combined technique for pneumatic flow-regulation valves[C]//Proceedings of the Joint Hungarian-British International Mechatronics Conference, Budapest, 1994.
[22] HUOVA M, PLOCKINGER A. Improving resolution of digital hydraulic valve system by utilizing fast switching valves[C]//Proceedings of the Third Workshop On Digital Fluid Power, Tampere, 2010, 79-92.
[23] PALONIITTY M, LINJAMA M. High-linear digital hydraulic valve control by an equal coded valve system and novel switching schemes[J]. Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering, 2018, 232(3):258-269.
[24] HUOVA M, LINJAMA M, SIIVONEN L, et al. Novel fine positioning method for hydraulic drives utilizing on/off-valves[C]//BATH/ASME 2018 Symposium on Fluid Power and Motion Control, New York, 2018.

等编码数字流量控制单元编码变换与控制方法

Configuration Transformation and Flow Control of Equal-coded Digital Flow Control Unit

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王波, 赵星宇, 权龙, 赵斌, 李运帷, 郝云晓. 基于主动压差调控的变增益流量控制原理[J]. 机械工程学报, 2024, 60(4): 134-142.
[2]	穆洪远, 程硕, 李凯, 李亮, 潘盼, 赵洵. 线性高速开关阀的设计及验证[J]. 机械工程学报, 2021, 57(22): 247-254.
[3]	施晨淳, 王振忠, 彭云峰, 李陈磊, 孔刘伟. PM流量控制器参数对液体静压导轨运动精度影响的研究[J]. 机械工程学报, 2020, 56(1): 157-165.
[4]	郝云晓, 权龙, 黄家海. 有源先导级控制的电液比例流量阀特性研究^*[J]. 机械工程学报, 2016, 52(18): 193-200.
[5]	贾永峰;谷立臣. 模模型与条件PID补偿的永磁伺服电动机驱动液压源流量控制[J]. , 2014, 50(8): 197-204.
[6]	童水光;王相兵;钟崴;张健. 基于虚拟样机技术的轴向柱塞泵动态特性分析[J]. , 2013, 49(2): 174-182.
[7]	曾敏;魏良红;马成;曹彪. 基于DSP的高频逆变电阻点焊电源的研究[J]. , 2011, 47(6): 80-85.
[8]	张立;刘昆;陈小飞;王博. 基于现场可编程门阵列的飞轮磁轴承功放三电平脉冲宽度调制策略[J]. , 2010, 46(20): 41-47.
[9]	常肖;徐龙祥;董继勇. 磁悬浮轴承数字功率放大器[J]. , 2010, 46(20): 9-14.
[10]	刘东晓;李运泽;李运华. 纳卫星等效空间热沉的PWM控制及其在地面模拟试验中的应用研究[J]. , 2010, 46(16): 148-155.
[11]	高峰;潘双夏. 负流量控制模型与试验研究[J]. , 2005, 41(7): 107-111.
[12]	王宣银;刘荣;贾光政. 关节式液压机械手脉码调制控制研究[J]. , 2002, 38(增刊): 203-206.
[13]	王宣银;陶国良. 广义脉码调制液压伺服控制的研究[J]. , 2000, 36(12): 14-17.
[14]	顾临怡;王庆丰. 采用计算流量反馈的流量控制方法及特性研究[J]. , 1999, 35(4): 96-98.
[15]	刘超;张光函. 微量调速阀抗污染机理研究[J]. , 1992, 28(1): 59-62.