连续纤维增强加筋圆柱壳回转3D打印工艺及其轴压性能研究

doi:10.3901/JME.2024.15.283

机械工程学报 ›› 2024, Vol. 60 ›› Issue (15): 283-290.doi: 10.3901/JME.2024.15.283

扫码分享

连续纤维增强加筋圆柱壳回转3D打印工艺及其轴压性能研究

刘明良¹, 唐颀², 田小永¹, 刘腾飞¹, 秦滢杰¹, 李涤尘¹

1. 西安交通大学机械制造系统工程国家重点实验室西安 710049;
2. 北京宇航系统工程研究所北京 100076

收稿日期:2023-11-01 修回日期:2024-04-25 出版日期:2024-08-05 发布日期:2024-09-24
作者简介:刘明良，男，2000年出生。主要研究方向为复合材料3D打印(增材制造)技术。E-mail：lmlxjtu@stu.xjtu.edu.cn
田小永(通信作者)，男，1981年出生，博士，教授，博士研究生导师。主要研究方向为多材料、复合材料3D打印(增材制造)技术及其应用。E-mail：leoxyt@mail.xjtu.edu.cn
基金资助:
国家自然科学基金资助项目(52075422)。

Study on the 3D Printing Process and Axial Compression Performance of Reinforced Cylindrical Shell

LIU Mingliang¹, TANG Qi², TIAN Xiaoyong¹, LIU Tengfei¹, QIN Yingjie¹, LI Dichen¹

1. State Key Laboratory for Manufacturing System Engineering, Xi’an Jiaotong University, Xi’an 710049;
2. Beijing Institute of Aerospace Systems Engineering, Beijing 100076

Received:2023-11-01 Revised:2024-04-25 Online:2024-08-05 Published:2024-09-24

摘要/Abstract

摘要： 复合材料加筋圆柱壳是一种先进飞行器典型结构，通常采用纤维缠绕工艺制作而成，对模具依赖程度较高，开发周期较长，不利于产品的快速迭代和低成本制造，针对传统成形工艺的不足，结合增材制造低成本快速制造的优势，分析了加筋圆柱壳3D打印技术研究的发展现状，提出了一种基于材料挤出成形技术的加筋圆柱壳回转3D打印工艺方法，开发了回转3D打印工艺装备，设计了针对连续纤维增强复合材料加筋圆柱壳的网格结构与打印路径，回转打印连续碳纤维增强聚乳酸加筋圆柱壳轴压临界载荷和载荷质量比分别达到71 459 N和578.29 N·g^-1，同等结构参数下，探究矩形、三角形、菱形网格形状筋条的轴压性能，结果表明菱形网格加筋圆柱壳轴压力学性能最优。

关键词: 回转3D打印, 加筋圆柱壳, 网格形状, 连续纤维增强复合材料, 轴向力学性能

Abstract: In view of the shortcomings of the traditional forming process, combined with the advantages of additive manufacturing of low-cost and rapid manufacturing, the development status of 3D printing technology of reinforced cylindrical shell is analyzed, a reinforced cylindrical shell rotary 3D printing process method based on material extrusion technology is proposed, the rotary 3D printing process equipment is developed, and the grid structure and printing path for the reinforced cylindrical shell of continuous fiber reinforced composite materials are designed. The axial compressive properties of rectangular, triangular and diamond-shaped mesh ribs are explored under the same structural parameters, and the results showed that the axial compressive performance of diamond-shaped reinforced cylindrical shells was the best.

Key words: rotation 3D printing, reinforced cylindrical shell, mesh shape, continuous fiber reinforced composites, axial mechanical properties

中图分类号:

TH162

刘明良, 唐颀, 田小永, 刘腾飞, 秦滢杰, 李涤尘. 连续纤维增强加筋圆柱壳回转3D打印工艺及其轴压性能研究[J]. 机械工程学报, 2024, 60(15): 283-290.

LIU Mingliang, TANG Qi, TIAN Xiaoyong, LIU Tengfei, QIN Yingjie, LI Dichen. Study on the 3D Printing Process and Axial Compression Performance of Reinforced Cylindrical Shell[J]. Journal of Mechanical Engineering, 2024, 60(15): 283-290.

参考文献

[1] 杜善义，方岱宁，孟松鹤，等.“近空间飞行器的关键基础科学问题”重大研究计划结题综述[J].中国科学基金，2017，31(2):109-114.DU Shanyi，FANG Daining，MENG Songhe，et al.A review of the key basic science issues of near-space vehicles[J].Science Foundation of China，2017，31(2):109-114.
[2] VASILIEV V V，BARYNIN V A，RAZIN A F.Anisogrid composite lattice structures – Development and aerospace applications[J].Composite Structures，2012，94(3):1117-1127.
[3] VASILIEV V V，BARYNIN V A，RAZIN A F，et al.Anisogrid composite lattice floor beam structures for commercial airplanes[C]//Proceedings of 20th International Conference on Composites，Copenhagen，Denmark.2015.
[4] RAZIN A F.The Problem of optimum design of composite housings of solid propellant rocket engines[J].Mechanics of Solids，2018，53(4):418-426.
[5] LI Ming，SUN Fangfang，LAI Changliang，et al.Fabrication and testing of composite hierarchical Isogrid stiffened cylinder[J].Composites Science and Technology，2018，157(3):152-159.
[6] SORRENTINO L，MARCHETTI M，BELLINI C，et al.Manufacture of high performance isogrid structure by robotic filament winding[J].Composite Structures，2017，164(6):43-50.
[7] CHACON J M，CAMINERO M A，GARCIA-PLAZA E，et al.Additive manufacturing of PLA structures using fused deposition modelling:Effect of process parameters on mechanical properties and their optimal selection[J].Materials & Design，2017，124:143-157.
[8] 徐隆坤.3D打印蜂窝结构各向异性和屈曲研究及实验验证[D].大连:大连理工大学，2018.XU Longkun.Research on anisotropy and buckling of 3D printed honeycomb structure and experimental verification[D].Dalian:Dalian University of Technology，2018.
[9] 郭永光.热塑性点阵及夹芯圆柱壳吸能性研究[D]．重庆:重庆大学，2020.GUO Yongguang.Study on energy absorption of thermoplastic lattice and sandwich cylindrical shell[D].Chongqing :Chongqing University，2020.
[10] van MANEN T，JANBAZ S，JANSEN K，et al.4D printing of reconfigurable metamaterials and devices[J].Communications Materials，2021，2(1):1-8.
[11] HAO W，LIU Y，ZHOU H，et al.Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites[J].Polymer Testing，2018，65(2):29-34.
[12] RAOUF N，DAVAR A，POURTAKDOUST S H.Reliability analysis of composite anisogrid lattice interstage structure[J].Mechanics Based Design of Structures and Machines，2022，50(9):3322-3330.
[13] HYEOK M J，TAEK S K，GUL I K，et al.Failure load prediction of anisogrid cylindrical composite lattice structures using failure criterion based on ratio of bending to compressive stress[J].Journal of Mechanical Science and Technology，2021，35(11):4897-4906.
[14] XIONG J，GHOSH R，MA L，et al.Bending behavior of lightweight sandwich-walled shells with pyramidal truss cores[J].Composite Structures，2014，116:793-804.
[15] XIONG J，FENG L，GHOSH R，et al.Fabrication and mechanical behavior of carbon fiber composite sandwich cylindrical shells with corrugated cores[J].Composite Structures，2016，156:307-319.
[16] YANG J，XIONG J，MA L，et al.Modal response of all-composite corrugated sandwich cylindrical shells[J].Composites Science and Technology，2015，115:9-20.
[17] YANG J，XIONG J，MA L，et al.Study on vibration damping of composite sandwich cylindrical shell with pyramidal truss-like cores[J].Composite Structures，2014，117:362-372.
[18] YANG J，MA L，CHAVES-VARGAS M，et al.Influence of manufacturing defects on modal properties of composite pyramidal truss-like core sandwich cylindrical panels[J].Composites Science and Technology，2017，147:89-99.
[19] YANG J S，MA L，SCHRÖDER K U，et al.Experimental and numerical study on the modal characteristics of hybrid carbon fiber composite foam filled corrugated sandwich cylindrical panels[J].Polymer Testing，2018，68:8-18.
[20] FAN Yunxing，LI Yihong.Research on damp heat resistant medium-temperature epoxy resin system for UAV[J].High-tech Fiber and Application，2022，47(6):55-60.
[21] ISAAC W C，PAWELCZYK M，WRONA S.Comparative study of sound transmission losses of sandwich composite double panel walls[J].Applied Sciences，2020，10(4):1543.
[22] QIN Z.Magneto-thermo-elasticity of an electroconductive circular cylindrical shell featuring nonlinear deformations[J].International Journal of Engineering Science，2010，48(12):1797-1810.
[23] TOTARO G.Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with triangular cells[J].Composite Structures，2011，94(2):446-452.
[24] HA S N，LU G.Thin-walled corrugated structures:A review of crashworthiness designs and energy absorption characteristics[J].Thin-Walled Structures，2020，157:106995.
[25] 刘腾飞，田小永，朱伟军，等.连续碳纤维增强聚乳酸复合材料3D打印及回收再利用机理与性能[J].机械工程学报，2019，55(7):128-134.LIU Tengfei，TIAN Xiaoyong，ZHU Weijun，et al.Mechanism and performance of continuous carbon fiber reinforced polylactic acid composite 3D printing and recycling[J].Journal of Mechanical Engineering，2019，55(7):128-134.
[26] JIANG Houfeng，JIA Ru，AIYITI W，et al.Infill strategies for 3D-printed CF-PEEK/HA-PEEK honeycomb core-shell composite structures[J].Journal of Manufacturing Processes，2023，92:338-349.

连续纤维增强加筋圆柱壳回转3D打印工艺及其轴压性能研究

Study on the 3D Printing Process and Axial Compression Performance of Reinforced Cylindrical Shell

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	朱利斌, 王英, 聂帅帅, 黄海鸿, 刘志峰. 基于质量流量优化的超临界CO₂辅助切削加工热平衡研究[J]. 机械工程学报, 2024, 60(19): 367-376.
[2]	温秋玲, 杨野, 黄辉, 黄国钦, 胡中伟, 陈金鸿, 汪晖, 吴贤. 激光复合加工硬脆性材料研究进展综述[J]. 机械工程学报, 2024, 60(9): 168-188.
[3]	关集俱, 祝正兵, 徐正亚, 栾志强, 许雪峰. CNTs@T321微囊制备的纳米流体与砂轮磨削时的双重润滑增效机制[J]. 机械工程学报, 2024, 60(9): 351-363.
[4]	赵希坤, 李聪波, 杨勇, 吕岩, 姜书艳. 数据-机理混合驱动下考虑刀具柔性的柔性加工工艺参数能效优化方法[J]. 机械工程学报, 2024, 60(7): 236-248.
[5]	刘春景, 唐敦兵, 陈兴强, 魏天路. 基于改进完全离散化法铣削系统稳定性研究[J]. 机械工程学报, 2023, 59(15): 162-173.
[6]	田志强, 姜兴宇, 杨国哲, 刘伟军, 索英祁, 陈克强, 邢飞. 一种面向航天复杂构件的柔性作业车间能耗优化调度问题研究[J]. 机械工程学报, 2023, 59(8): 273-287.
[7]	吕岩, 徐正军, 李聪波, 李玲玲, 杨秒. 考虑扰动事件的机械加工工艺参数与车间动态调度综合节能优化[J]. 机械工程学报, 2022, 58(19): 242-255.
[8]	李思念, 黄海鸿, 赵伦武, 刘志峰. 外加磁场对等离子熔覆FeCoNiCr_0.5B高熵合金涂层组织与性能的影响[J]. 机械工程学报, 2022, 58(13): 251-260.
[9]	张嘉恒, 胡志力. 铝合金搅拌摩擦焊接头组织热稳定性[J]. 机械工程学报, 2022, 58(6): 73-80.
[10]	汪延成, 刘佳薇, 盘何旻, 梅德庆. 聚合物基表面微结构的逐面式制造技术研究进展[J]. 机械工程学报, 2021, 57(21): 220-233.
[11]	李聪波, 王睿, 寇阳, 吕岩, 赵希坤. 考虑设备预维护的柔性作业车间调度节能优化方法[J]. 机械工程学报, 2021, 57(10): 220-230.
[12]	张阳, 吴宝海, 夏卫红, 张莹, 赵静. 变切深工况下恒定切削力约束的多目标进给量优化方法[J]. 机械工程学报, 2021, 57(5): 242-250.
[13]	李聪波, 余必胜, 肖溱鸽, 孙鑫, 吕岩. 考虑刀具磨损的数控车削批量加工工艺参数节能优化方法[J]. 机械工程学报, 2021, 57(1): 217-229.
[14]	赵广, 金鑫, 崔颖, 冯志飞, 王亭月, 熊志亮. 基于模态应变能的接触刚度识别方法[J]. 机械工程学报, 2020, 56(9): 147-153.
[15]	胡志力, 范新欣, 华林. 高强铝合金FSW拼焊板变形规律与成形技术[J]. 机械工程学报, 2020, 56(6): 206-212.