复杂产品不确定性智能设计研究综述与展望

doi:10.3901/JME.2023.19.213

机械工程学报 ›› 2023, Vol. 59 ›› Issue (19): 213-236.doi: 10.3901/JME.2023.19.213

扫码分享

复杂产品不确定性智能设计研究综述与展望

洪兆溪^1,2, 冯毅雄², 娄山河³, 宋秀菊², 胡炳涛², 张志峰², 谭建荣²

1. 浙江大学宁波科创中心宁波 315100;
2. 浙江大学流体动力基础件与机电系统全国重点实验室杭州 310027;
3. 南洋理工大学机械与宇航工程学院新加坡 637460

收稿日期:2023-06-30 修回日期:2023-09-12 出版日期:2023-10-05 发布日期:2023-12-11
通讯作者: 谭建荣(通信作者),男,1954 年出生,博士,教授,博士研究生导师,中国工程院院士。主要研究方向为CAX方法学、工程图学、企业信息化。E-mail:egi@zju.edu.cn
作者简介:洪兆溪,女,1990年出生,博士,助理研究员。主要研究方向为智能设计与不确定性优化决策。E-mail:hzhx@zju.edu.cn;冯毅雄,男,1975年出生,博士,教授,博士研究生导师。主要研究方向为现代产品设计理论与方法。E-mail:fyxtv@zju.edu.cn;娄山河,男,1993年出生,博士,博士后。主要研究方向为产品创新设计理论、设计认知。E-mail:shanhe.lou@ntu.edu.sg;宋秀菊,女,1989年出生,博士,研究员,博士研究生导师。主要研究方向为材料结构功能一体化设计。E-mail:songxiuju@zju.edu.cn;胡炳涛,男,1992年出生,博士,博士后。主要研究方向为产品设计理论与智能制造。E-mail:hubingtao@zju.edu.cn;张志峰,男,1991年出生,博士研究生。主要研究方向为绿色设计理论与智能调度。E-mail:zhzhfeng@zju.edu.cn
基金资助:
国家自然科学基金资助项目(52130501, 52105281，51935009)。

Overview and Prospects of Uncertain Intelligent Design for Complex Products

HONG Zhaoxi^1,2, FENG Yixiong², LOU Shanhe³, SONG Xiuju², HU Bingtao², ZHANG Zhifeng², TAN Jianrong²

1. Ningbo Innovation Center, Zhejiang University, Ningbo 315100;
2. State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027;
3. School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore 637460

Received:2023-06-30 Revised:2023-09-12 Online:2023-10-05 Published:2023-12-11

摘要/Abstract

摘要： 不确定性现象普遍存在于各个设计环节，使得复杂产品的设计过程越来越复杂，正确认识并掌握设计过程中的各种不确定性是复杂产品智能设计取得成功的必要条件。系统梳理了产品设计中的不确定性因素种类与特征，聚焦于不确定性智能设计的设计流程，围绕用户需求不确定性智能分析、功能结构不确定性智能求解、设计方案不确定性智能决策、局部参数不确定性智能优化四个方面，分析了其研究现状与应用场景。针对现有不确定性智能设计中存在的强模糊冗余条件下设计意图难提取、不完全可信条件下功能行为难推理、不完备区间条件下设计方案难决策、混合不确定条件下结构性能难预测等问题，提出了复杂产品不确定性智能设计的未来研究方向。

关键词: 复杂产品, 不确定性智能设计, 用户需求分析, 功能结构求解, 设计方案决策, 局部参数优化

Abstract: Uncertain factors exist in every design step, which makes the design process of complex products more and more complicated. It is necessary to correctly understand and master various uncertainty phenomena in the intelligent design process of complex products. The types and characteristics of different uncertainty factors in product design are systematically sorted out. Focusing on the process promotion of uncertain intelligent design, its research status and application scenarios are analyzed from four aspects: uncertain intelligent analysis of customer demand, uncertain intelligent solution of functional structure, uncertain intelligent decision-making of design scheme and uncertain intelligent optimization of local parameter. In view of the existing problems in current uncertain intelligent design, such as the design intention is difficult to extract under strong fuzzy redundancy, the functional behavior is difficult to reason under incomplete trust, the design scheme is difficult to decide under incomplete interval, and the structural performance is difficult to predict under mixed uncertainties, the future research directions of uncertain intelligent design for complex products are proposed.

Key words: complex product, uncertain intelligent design, customer demand analysis, functional structure solution, design scheme decision-making, local parameter optimization

中图分类号:

TH122

洪兆溪, 冯毅雄, 娄山河, 宋秀菊, 胡炳涛, 张志峰, 谭建荣. 复杂产品不确定性智能设计研究综述与展望[J]. 机械工程学报, 2023, 59(19): 213-236.

HONG Zhaoxi, FENG Yixiong, LOU Shanhe, SONG Xiuju, HU Bingtao, ZHANG Zhifeng, TAN Jianrong. Overview and Prospects of Uncertain Intelligent Design for Complex Products[J]. Journal of Mechanical Engineering, 2023, 59(19): 213-236.

参考文献

[1] YUKSEL N,BORKLU H,SEZER H,et al. Review of artificial intelligence applications in engineering design perspective[J]. Engineering Applications of Artificial Intelligence,2023,118:105697.
[2] 罗仕鉴,龚何波,林伟. 智能产品交互设计研究现状与进展[J]. 机械工程学报,2023,59(11):1-15. LUO Shijian,GONG Hebo,LIN Wei. Status and progress of intelligent products interaction design[J]. Journal of Mechanical Engineering,2023,59(11):1-15.
[3] YE Fei,PERRETT J,ZHANG Lin,et al. A self-evolving system for robotic disassembly sequence planning under uncertain interference conditions[J]. Robotics and Computer-Integrated Manufacturing,2022,78:102392.
[4] 徐江,孙刚,徐静妤,等. 智能交互的认知哲学逻辑及设计评价研究[J]. 机械工程学报,2023,59(11):31-42. XU Jiang,SUN Gang,XU Jingyu,et al. Cognition philosophy logic and design evaluation of intelligent interaction[J]. Journal of Mechanical Engineering, 2023,59(11):31-42.
[5] HONG Zhaoxi,JIANG Xiangyu,FENG Yixiong,et al. Reliability topology optimization of collaborative design for complex products under uncertainties based on the TLBO algorithm[J]. Engineering,2023,22:71-81.
[6] GARBUIO M, LIN N. Innovative idea generation in problem finding:abductive reasoning,cognitive impediments, and the promise of artificial intelligence[J]. Journal of Product Innovation Management,2021, 38(6):701-725.
[7] WANG Zuoxu, ZHENG Pai, LI Xinyu, et al. Implications of data-driven product design:from information age towards intelligence age[J]. Advanced Engineering Informatics,2022,54:101793.
[8] 顾新建,马步青,顾复,等. 产品模块化中的若干智能方法[J]. 机械工程学报,2021,57(17):1-9. GU Xinjian,MA Buqing,GU Fu,et al. Some intelligent methods in product modularization[J]. Journal of Mechanical Engineering,2021,57(17):1-9.
[9] 谭建荣,冯毅雄. 智能设计理论与方法[M]. 北京:清华大学出版社,2020. TAN Jianrong,FENG Yixiong. Intelligent design theory and method[M]. Beijing:Tsinghua University Press, 2020.
[10] YAN Hongbin,MENG Xiangsheng,MA Tieju,et al. An uncertain target-oriented QFD approach to service design based on service standardization with an application to bank window service[J]. IISE Transactions,2019, 51(11):1167-1189.
[11] 朱思羽,胡洁,戚进. 基于美学、人体工学及性能的多因素融合设计[J]. 机械工程学报,2020,56(21):199-207. ZHU Siyu,HU Jie,QI Jin. Multi-factor coupling design based on aesthetic measure,ergonomics,and performance[J]. Journal of Mechanical Engineering, 2020,56(21):199-207.
[12] 中国机械工程学会. 2016-2017机械工程学科发展报告(机械设计)[M]. 北京:中国科学技术出版社,2018. Chinese Mechanical Engineering Society. 2016-2017 Report on advances in mechanical design[M]. Beijing:China Science and Technology Press,2018.
[13] WIEN A,PELUSO A. Influence of human versus AI recommenders:the roles of product type and cognitive processes[J]. Journal of Business Research,2021,137:13-27.
[14] PAHL G,BEITZ W,FELDHUSEN J,et al. Engineering design:a systematic approach[M]. London:Springer-Verlag,2007.
[15] AKAO Y. Quality function deployment:integrating customer requirements into product design[M]. London:Massachusetts Production Press, 1990.
[16] SUH N. Axiomatic design:advances and applications[M]. New York:Oxford University Press,2001.
[17] YOSHIKAWA H,NAKAGAWA T,NAKATANI Y,et al. Development of an analysis support system for man-machine system design information[J]. Control Engineering Practice,1997,5(3):417-425.
[18] ALTSHULLER G. The innovation algorithm:TRIZ, systematic innovation and technical creativity[M]. Worcester:Technical Innovation Center,1999.
[19] KE Chao,JIANG Zhigang,ZHANG Hua,et al. An intelligent design for remanufacturing method based on vector space model and case-based reasoning[J]. Journal of Cleaner Production,2020,277:123269.
[20] HERNANDEZ N,KREMER G,SCHMIDT L,et al. Development of an expert system to aid engineers in the selection of design for environment methods and tools[J]. Expert Systems with Applications,2012,39(10):9543-9553.
[21] XU Kaijie,PEDRYCZ W,LI Zhiwu. Granular computing:An augmented scheme of degranulation through a modified partition matrix[J]. Fuzzy Sets and Systems, 2022,440:131-148.
[22] DOURADO A,LOBATO F,CAVALINI A,et al. Fuzzy reliability-based optimization for engineering system design[J]. International Journal of Fuzzy Systems, 2019,21(5):1418-1429.
[23] HONG Zhaoxi,FENG Yixiong,LI Zhiwu,et al. An integrated approach for multi-objective optimisation and MCDM of energy internet under uncertainty[J]. Future Generation Computer Systems-The International Journal of Escience, 2019,97:90-104.
[24] ANAND M,BAGEN B,RAJAPAKSE A. Probabilistic reliability evaluation of distribution systems considering the spatial and temporal distribution of electric vehicles[J]. International Journal of Electrical Power & Energy Systems,2020,117:105609.
[25] DAVOUDABADI R,MOUSAVI S, MOHAGHEGHI V. A new last aggregation method of multi-attributes group decision making based on concepts of TODIM, WASPAS and TOPSIS under interval-valued intuitionistic fuzzy uncertainty[J]. Knowledge and Information Systems,2020,62(4):1371-1391.
[26] 姜潮,韩旭,谢慧超. 区间不确定性优化设计理论与方法[M]. 北京:科学出版社,2021. JIANG Chao,HAN Xu,XIE Huichao. Interval uncertain optimization design and methods[M]. Beijing:Science Press,2021.
[27] LÜ H,WANG W,LIU Xiaoping. Universal approximation of fuzzy relation models by semitensor product[J]. IEEE Transactions on Fuzzy Systems,2020, 28(11):2972-2981.
[28] 景立挺,陈盈臣,谢静,等. 考虑用户权重不一致性和复杂交互影响的产品可持续设计需求评估研究[J]. 机械工程学报,2023,59(3):218-231. JING Liting,CHEN Yingchen,XIE Jing,et al. Research on the evaluation of product sustainable design demands considering the inconsistency of users' weights and complex interaction[J]. Journal of Mechanical Engineering,2023,59(3):218-231.
[29] AKGUL E,DELICE Y,AYDOGAN E K,et al. An application of fuzzy linguistic summarization and fuzzy association rule mining to kansei engineering:a case study on cradle design[J]. Journal of Ambient Intelligence and Humanized Computing,2022,13:2533-2563.
[30] JING Liting,LI Qizhi,MA Junfeng,et al. A conceptual design decision approach by integrating rough Bayesian network and game theory under uncertain behavior selections[J]. Expert Systems with Applications,2022, 202:117108.
[31] HASELMAYR W,WIESINGER D, LUNGLMAYR M. High-accuracy and fault tolerant stochastic inner product design[J]. IEEE Transactions on Circuits and Systems II-Express Briefs,2020,67(3):541-545.
[32] 范小宁,王凯,余畅. 基于约束边界抽样的起重机金属结构可靠性优化[J]. 机械工程学报,2023,59(8):288-298. FAN Xiaoning,WANG Kai,YU Chang. Reliability-based design optimization of crane metal structure based on constraint boundary sampling[J]. Journal of Mechanical Engineering,2023,59(8):288-298.
[33] HONG Zhaoxi, FENG Yixiong, LI Zhiwu, et al. Performance balance oriented product structure optimization involving heterogeneous uncertainties in intelligent manufacturing with an industrial network[J]. Information Sciences,2022,598:126-156.
[34] CHENG Jin,LU Wei,LOU Yibin,et al. Robust topology optimization of graphene platelets reinforced functionally graded materials considering hybrid bounded uncertainties[J]. Journal of Mechanical Design,2022, 144(5):051704.
[35] GARG H,KAUR G. Algorithm for solving the decision-making problems based on correlation coefficients under cubic intuitionistic fuzzy information:a case study in watershed hydrological system[J]. Complex & Intelligent Systems,2021,8(1):179-198.
[36] LOU Shanhe,FENG Yixiong,LI Zhiwu,et al. An edge-based distributed decision-making method for product design scheme evaluation[J]. IEEE Transactions on Industrial Informatics,2021,17(2):1375-1385.
[37] WANG Yi,ZHAO Qinxin,CHEN Jian,et al. Color design decisions for ceramic products based on quantification of perceptual characteristics[J]. Sensors, 2022,22(14):5415.
[38] HUANG Weidong,XIAO Xiang,XU Mengqiang. Design and implementation of domain-specific cognitive system based on question similarity algorithm[J]. Cognitive Systems Research,2019,57:20-24.
[39] ZENG Dong,HE Maoen,TANG Xingzhi,et al. Cognitive association in interactive evolutionary design process for product styling and application to SUV design[J]. Electronics,2020,9(11):1960.
[40] 郑庆,丁国富. 群智协同设计活动复杂性的度量模型及方法[J].西南交通大学学报,2021,56(5):989-994,1010. ZHENG Qing,DING Guofu. Complexity measurement model and methods of crowd intelligence collaborative innovation for design activities[J]. Journal of Southwest Jiaotong University,2021,56(5):989-994,1010.
[41] YAN Hongbin,LI Ming. An uncertain Kansei engineering methodology for behavioral service design[J]. IISE Transactions,2020,53(5):497-522.
[42] DELLERMANN D,LIPUSCH N,EBEL P,et al. Design principles for a hybrid intelligence decision support system for business model validation[J]. Electronic Markets,2019,29(3):423-441.
[43] 赵欣怡,宗群,张睿隆,等. 类脑智能技术在无人系统上的应用[J]. 控制理论与应用,2019,36(1):1-12. ZHAO Xinyi,ZONG Qun,ZHANG Ruilong,et al. Application of brain-inspired intelligence technology in unmanned vehicles[J]. Control Theory & Applications 2019,36(1):1-12.
[44] BHATTACHARYA A,BIJAN S,MUKHERJEE S. Integrating AHP with QFD for robot selection under requirement perspective[J]. International Journal of Production Research,2005,43(17):3671-3685.
[45] YAZDANI M,KAHRAMAN C,ZARATE P,et al. A fuzzy multi attribute decision framework with integration of QFD and grey relational analysis[J]. Expert Systems with Applications,2019,115:474-485.
[46] JIN Jian,LIU Ying,JI Ping,et al. Understanding big consumer opinion data for market-driven product design[J]. International Journal of Production Research, 2016,54(10):3019-3041.
[47] KHALAJ J,PEDGLEY O. A semantic discontinuity detection (SDD) method for comparing designers' product expressions with users' product impressions[J]. Design Studies,2019,62:36-67.
[48] TIMOSHENKO A,HAUSER J. Identifying customer needs from user generated content[J]. Marketing Science,2019,38(1):1-20.
[49] CARULLI M,BORDEGONI M,CUGONO U. An approach for capturing the voice of the customer based on virtual prototyping[J]. Journal of Intelligent Manufacturing,2013,24(5):887-903.
[50] WANG Xiaoyuan, GUO Yongqing, BAI Chenglin, et al. Driver's intention identification with the involvement of emotional factors in two-lane roads[J]. IEEE Transactions on Intelligent Transportation Systems, 2020, 22(11):6866-6874.
[51] 杨程,陈辰,唐智川,等. 基于脑电的产品意象推理模型研究[J]. 机械工程学报,2018,54(23):126-136. YANG Cheng,CHEN Chen,TANG Zhichuan,et al. Research on product image reasoning model based on EEG[J]. Journal of Mechanical Engineering,2018, 54(23):126-136.
[52] DING Yi,GUO Fu,ZHANG Xuefeng,et al. Using event related potentials to identify a user's behavioral intention aroused by product form design[J]. Applied Ergonomics, 2016,55:117-123.
[53] LOU Shanhe, FENG Yixiong, ZHENG Hao, et al. Data-driven customer requirements discernment in the product lifecycle management via intuitionistic fuzzy sets and electroencephalogram[J]. Journal of Intelligent Manufacturing,2020,31(7):1721-1736.
[54] WU Xuanyu,HONG Zhaoxi,FENG Yixiong,et al. A semantic analysis-driven customer requirements mining method for product conceptual design[J]. Scientific Reports,2022,12(1):10139.
[55] ZHAN Yuanzhu,TAN K,HUO Baofeng,et al. Bridging customer knowledge to innovative product development:a data mining approach[J]. International Journal of Production Research,2019,57(20):6335-6350.
[56] 贾丹萍,靳健,耿骞,等. 感性工学视角下的用户需求挖掘研究[J]. 情报学报,2020,39(3):308-316. JIA Danping,JIN Jian,GENG Qian,et al. A Kansei engineering integrated approach for customer-needs mining from online product reviews[J]. Journal of China Society for Scientific and Technical Information,2020, 39(3):308-316.
[57] HOU Tianjun,YANNOU B,LEROY Y,et al. Mining customer product reviews for product development:a summarization process[J]. Expert Systems with Applications,2019,132:141-150.
[58] ZHANG Min,SUN Lin,WANG G,et al. Using neutral sentiment reviews to improve customer requirement identification and product design strategies[J]. International Journal of Production Economics,2022,254:108641.
[59] JIANG Huimin,KWONG C,KREMER G,et al. Dynamic modelling of customer preferences for product design using DENFIS and opinion mining[J]. Advanced Engineering Informatics,2019,42:100969.
[60] SUN Hui,GUO Wei,SHAO Hongyu,et al. Dynamical mining of ever-changing user requirements:a product design and improvement perspective[J]. Advanced Engineering Informatics,2020,46:101174.
[61] FAZELI H,PENG Qingjin. Integrated approaches of BWM-QFD and FUCOM-QFD for improving weighting solution of design matrix[J]. Journal of Intelligent Manufacturing,2023,34(3):1003-1020.
[62] JIA Weiqiang,LIU Zhenyu,LIN Zhiyun,et al. Quantification for the importance degree of engineering characteristics with a multi-level hierarchical structure in QFD[J]. International Journal of Production Research, 2015,54(6):1-23.
[63] 张雷,钟言久,袁远,等. 基于数据挖掘的绿色设计中客户需求向工程特性权重转化方法[J]. 中国机械工程,2019,30(2):174-182. ZHANG Lei,ZHONG Yanjiu,YUAN Yuan,et al. Method of transform customer demands to engineering characteristic weights in green design based on data mining[J]. China Mechanical Engineering, 2019, 30(2):174-182.
[64] ZHAO Shuangyao,ZHANG Qiang,PENG Zhanglin,et al. Integrating customer requirements into customized product configuration design based on Kano's model[J]. Journal of Intelligent Manufacturing,2020,31(3):597-613.
[65] KARASAN A,IIBAHAR E,CEBI S,et al. Customer-oriented product design using an integrated neutrosophic AHP & DEMATEL & QFD methodology[J]. Applied Soft Computing,2022,118:108445.
[66] WANG Tianxiong,YANG Liu. Combining GRA with a fuzzy QFD model for the new product design and development of Wickerwork Lamps[J]. Sustainability, 2023,15(5):4208.
[67] FANG Xinghua,SHEN Yixuan,ZHOU Jian,et al. QFD-based product design for multisegment markets:a fuzzy chance-constrained programming approach[J]. IEEE Transactions on Engineering Management,2022,69(5):2296-2310.
[68] JIN Jian,JI Ping,LIU Ying. Translating online customer opinions into engineering characteristics in QFD:A probabilistic language analysis approach[J]. Engineering Applications of Artificial Intelligence,2015,41:115-127.
[69] WANG Yue,LUO Linkai,LIU Hai. Bridging the semantic gap between customer needs and design specifications using user-generated content[J]. IEEE Transactions on Engineering Management,2022,69(4):1622-1634.
[70] 闻邦椿. 产品全功能与全性能的综合设计[M]. 北京:机械工业出版社,2008. WEN Bangchun. Comprehensive design of full function and full performance for products[M]. Beijing:China Machine Press,2008.
[71] 邓家褆,韩晓建,曾硝,等. 产品概念设计:理论、方法与技术[M]. 北京:机械工业出版社,2002. DENG Jiati,HAN Xiaojian,ZENG Xiao,et al. Product conceptual design:theory,method and technology[M]. Beijing:China Machine Press,2002.
[72] 张树新,于亦奇,曹政,等. 可重复展收单折伞状天线机构创新设计与实验验证[J]. 机械工程学报, 2023,59(3):13-21. ZHANG Shuxin,YU Yiqi,CAO Zheng,et al. Novel mechanism design and prototype verification of a single folding umbrella antenna for repeatable deploying and furling function[J]. Journal of Mechanical Engineering, 2023,59(3):13-21.
[73] 于泽源,赵武,张凯,等.支持产品迭代设计的知识推送方法[J]. 机械工程学报,2022,58(18):292-302. YU Zeyuan,ZHAO Wu,ZHANG Kai,et al. Knowledge push method to support iterative product design[J]. Journal of Mechanical Engineering,2022,58(18):292-302.
[74] KHAN M,MITTAL S,WEST S,et al. Review on upgradability-a product lifetime extension strategy in the context of product service systems[J]. Journal of Cleaner Production,2018,204:1154-1168.
[75] 刘晓敏,罗林辉,陈亮,等. 基于C-K理论的产品仿生创新设计研究[J].机械工程学报,2020,56(13):207-217. LIU Xiaomin,LUO Linhui,CHEN Liang,et al. Research on bio-inspired design based on C-K theory for product innovation[J]. Journal of Mechanical Engineering, 2020,56(13):207-217.
[76] GOUCHER-LAMBERT K,GYORY J,KOTOVSKY K, et al. Adaptive inspirational design stimuli:using design output to computationally search for stimuli that impact concept generation[J]. Journal of Mechanical Design, 2020,142(9):091401.
[77] GOUCHER-LAMBERT K,GYORY J,KOTOVSKY K, et al. Computationally derived adaptive inspirational stimuli for real-time design support during concept generation[C]//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers,2019,59278:V007T06A009.
[78] HU Wanlin,REID T. The effects of designers' contextual experience on the ideation process and design outcomes[J]. Journal of Mechanical Design,2018, 140(10):101101.
[79] JOHNSON D,GENCO N,SAUNDERS M,et al. An experimental investigation of the effectiveness of empathic experience design for innovative concept generation[J]. Journal of Mechanical Design,2014, 136(5):051009.
[80] PUENTES L,CAGAN J,MCCOMB C. Heuristic-guided solution search through a two-tiered design grammar[J]. Journal of Computing and Information Science in Engineering,2020,20(1):011008.
[81] LLOYD P,CHANDRASEGARAN S,KIM E,et al. Designing dialogue:human-AI collaboration in design processes[C]//DRS2022, Spain,2022,http://doi.org/10.21606/drs.2022.1079.
[82] 李彦,刘红围,李梦蝶,等. 设计思维研究综述[J].机械工程学报,2017,53(15):1-20. LI Yan,LIU Hongwei,LI Mengdie,et al. Review on research of design thinking[J]. Journal of Mechanical Engineering,2017,53(15):1-20.
[83] 袁萍,熊艳,李彦,等. 基于EEG α波活动探究信息激励距离对产品设计思维的影响[J]. 机械工程学报,2017,53(15):40-48. YUAN Ping,XIONG Yan,LI Yan,et al. An exploration into the influence of stimulation distance of stimulus information on design thinking based on EEG alpha activity[J]. Journal of Mechanical Engineering,2017,53(15):40-48.
[84] RAHMAN M,XIE C,SHA Z. Predicting sequential design decisions using the function-behavior-structure design process model and recurrent neural networks[J]. Journal of Mechanical Design, 2021, 143(8):081706.
[85] 冯培恩,张帅,潘双夏,等. 复合功能产品概念设计循环求解过程及其实现[J]. 机械工程学报,2005,(3):135-141. FENG Peien,ZHANG Shuai,PAN Shuangxia,et al. Cyclic solving process and realization for conceptual design of complex function product[J]. Journal of Mechanical Engineering,2005,(3):135-141.
[86] 楼炯炯,桂方志,任设东,等. 基于可拓创新方法的改进TRIZ研究[J]. 计算机集成制造系统,2018,24(1):127-135. LOU Jiongjiong,GUI Fangzhi,REN Shedong,et al. Improved TRIZ based on extension innovation method[J]. Computer Integrated Manufacturing Systems,2018,24(1):127-135.
[87] 郑浩,冯毅雄,高一聪,等. 基于性能演化的复杂产品概念设计求解过程研究[J]. 机械工程学报,2018, 54(9):214-223. ZHENG Hao,FENG Yixiong,GAO Yicong,et al. The solving process of conceptual design for complex product based on performance evolution[J]. Journal of Mechanical Engineering,2018,54(9):214-223.
[88] 冀翔,张树有,刘晓健. 面向众创设计的复杂定制装备设计方案融合方法[J]. 计算机集成制造系统,2019,25(9):2344-2354. JI Xiang,ZHANG Shuyou,LIU Xiaojian,et al. Design fusion method on complex customized equipment for mass innovation design[J]. Computer Integrated Manufacturing Systems,2019,25(9):2344-2354.
[89] 闫喜强,李彦,李文强,等. 基于耦合强度和模糊设计结构矩阵的多学科解耦规划方法[J]. 计算机集成制造系统,2013,19(7):1447-1455. YAN Xiqiang,LI Yan,LI Wenqiang,et al. Decoupling planning method of MDO based on coupling strength and FDSM[J]. Computer Integrated Manufacturing Systems, 2013,19(7):1447-1455.
[90] HU Huicong,LIU Ying,GUO Xin,et al. A conceptual design specification based on user aesthetic information analysis and product functional reasoning[J]. Machines,2022,10(10):868.
[91] SIVANATHAN A,LIM T,RITCHIE J,et al. The application of ubiquitous multimodal synchronous data capture in CAD[J]. Computer-Aided Design,2015,59:176-191.
[92] RAHMAN M,SCHIMPF C,XIE C,et al. A computer-aided design based research platform for design thinking studies[J]. Journal of Mechanical Design,2019,141(12):121102.
[93] SONG Binyang,GYORY J,ZHANG Guanglu,et al. Decoding the agility of artificial intelligence-assisted human design teams[J]. Design Studies,2022,79:101094.
[94] ZURITA N F S,TENSA M A,FERRERO V,et al. Uncovering human errors associated with system-user interactions using functional modeling[J]. Journal of Mechanical Design,2022,144(8):081401.
[95] RAINA A,MCCOMB C,CAGAN J. Learning to design from humans:Imitating human designers through deep learning[J]. Journal of Mechanical Design,2019,141(11):111102.
[96] KWOK C P,TANG Y M. A fuzzy MCDM approach to support customer-centric innovation in virtual reality (VR) metaverse headset design[J]. Advanced Engineering Informatics,2023,56:101910.
[97] JEANG A. Robust DEA methodology via computer model for conceptual design under uncertainty[J]. Journal of Intelligent Manufacturing,2019,30:1221-1245.
[98] ZHU Guoniu,HU Jie,REN Hongliang. A fuzzy rough number-based AHP-TOPSIS for design concept evaluation under uncertain environments[J]. Applied Soft Computing,2020,91:106228.
[99] FENG Chunhua, HUANG Shi, BAI Guozhen. A group decision making method for sustainable design using intuitionistic fuzzy preference relations in the conceptual design stage[J]. Journal of Cleaner Production,2020,243:118640.
[100] ZHU Guoniu. Design concept evaluation considering information reliability, uncertainty, and subjectivity:An integrated rough-Z-number-enhanced MCGDM methodology[J]. Advanced Engineering Informatics, 2022,54:101796.
[101] 裴卉宁,谭昭芸,刘鑫宇,等. 基于单值中智集和云聚类的产品造型设计决策方法[J]. 浙江大学学报,2022,56(12):2367-2378. PEI Huining,TAN Zhaoyun,LIU Xinyu,et al. Decision method for product styling design based on single-valued neutrosophic sets and cloud clustering[J]. Journal of Zhejiang University,2022,56(12):2367-2378.
[102] CHENG Jin,FENG Yixiong,LIN Zhiqiang,et al. Anti-vibration optimization of the key components in a turbo-generator based on heterogeneous axiomatic design[J]. Journal of Cleaner Production,2017,141:1467-1477.
[103] 田广东,张洪浩,王丹琦. 基于模糊AHP-灰色关联TOPSIS的拆解方案评估研究[J]. 机械工程学报,2017,53(5):34-40. TIAN Guangdong, ZHANG Honghao, WANG Danqi. Disassembly program evaluation research based on fuzzy AHP,grey correlation and TOPSIS combined approach[J]. Journal of Mechanical Engineering,2017,53(5):34-40.
[104] FENG Yixiong,ZHOU Mengchu,TIAN Guangdong,et al. Target disassembly sequencing and scheme evaluation for CNC machine tools using improved multiobjective ant colony algorithm and fuzzy integral[J]. IEEE Transactions on Systems Man Cybernetics-Systems,2019,49(12):2438-2451.
[105] ZHOU Jing,XIAHOU Tangfan,LIU Yu. Multi-objective optimization-based TOPSIS method for sustainable product design under epistemic uncertainty[J]. Applied Soft Computing,2021,98:106850.
[106] WANG Zili,ZHANG Shuyou,QIU Lemiao,et al. A low-carbon-orient product design schemes MCDM method hybridizing interval hesitant fuzzy set entropy theory and coupling network analysis[J]. Soft Computing,2020,24(7):5389-5408.
[107] 孟强,李方义,李静,等. 基于绿色特征的方案设计快速生命周期评价方法[J]. 计算机集成制造系统, 2015,21(3):626-633. MENG Qiang,LI Fangyi,LI Jing,et al. Green features-based rapid life cycle assessment method for conceptual design[J]. Computer Integrated Manufacturing Systems,2015,21(3):626-633.
[108] ZHOU Jing,LIU Yu,XIAHOU Tangfan,et al. A novel FMEA-based approach to risk analysis of product design using extended choquet integral[J]. IEEE Transactions on Reliability,2022,71(3):1264-1280.
[109] FENG Yixiong,HONG Zhaoxi,TIAN Guangdong,et al. Environmentally friendly MCDM of reliability-based product optimisation combining DEMATEL-based ANP, interval uncertainty and Vlse Kriterijumska Optimizacija Kompromisno Resenje (VIKOR)[J]. Information Sciences,2018,442:128-144.
[110] 邢青松,梁闯,梁学栋. 工序关联下考虑主体心理感知的复杂产品设计变更决策优化[J]. 中国机械工程,2022,33(3):366-377. XING Qingsong,LIANG Chuang,LIANG Xuedong. Optimization of complex product design change decision based on process correlation considering agent psychological perception[J]. China Mechanical Engineering,2022,33(3):366-377.
[111] YANG Yanpu,YANG Qinxia,AN Weilan,et al. Nonlinear fusion method for multistage product design decision-making using plant growth simulation algorithm[J]. Advanced Engineering Informatics,2022, 53:101712.
[112] OH G,HONG Y. Managing market risk caused by customer preference uncertainty in product family design with launch flexibility:product option strategy[J]. Computers & Industrial Engineering,2021,151:106975.
[113] SHALLCROSS N J, PARNELL G S, POHL E A, et al. Informing program management decisions using quantitative set-based design[J/OL]. IEEE Transactions on Engineering Management,2021,http://doi.org/10.1109/TEM.2021.3078387.
[114] 程贤福,肖人彬,刘平安,等. 基于信息公理的混合型多属性产品方案评价[J]. 计算机集成制造系统, 2010,16(9):1816-1822. CHENG Xianfu,XIAO Renbin,LIU Pingan,et al. Hybrid multiple attributes evaluation method for product scheme based on information axiom[J]. Computer Integrated Manufacturing Systems,2010,16(9):1816-1822.
[115] LIU Huchen,QUAN Meiyun,SHI Hua,et al. An integrated MCDM method for robot selection under interval-valued pythagorean uncertain linguistic environment[J]. International Journal of Intelligent Systems,2019,34(2):188-214.
[116] 耿秀丽,王婕. 基于复杂网络和偏好顺序结构评估法的产品服务系统设计方案评价[J]. 计算机集成制造系统,2019,25(9):2324-2333. GENG Xiuli,WANG Jie. Evaluation of product service system design based on complex network and PROMETHEE II[J]. Computer Integrated Manufacturing Systems,2019,25(9):2324-2333.
[117] 张义民,孙志礼. 机械产品的可靠性大纲[J]. 机械工程学报,2014,50(14):14-20. ZHANG Yimin,SUN Zhili. The reliability syllabus of mechanical products[J]. Journal of Mechanical Engineering,2014,50(14):14-20.
[118] 姜潮,张旺,韩旭. 基于Copula函数的证据理论相关性分析模型及结构可靠性计算方法[J]. 机械工程学报,2017,53(16):199-209. JIANG Chao,ZHANG Wang,HAN Xu. A copula function based evidence theory model for correlation analysis and corresponding structural reliability method[J]. Journal of Mechanical Engineering,2017, 53(16):199-209.
[119] WANG Muru,FAN Janping,HU Jiabing. A non-probabilistic reliability-based design optimization method for structures based on interval models[J]. Fatigue & Fracture of Engineering Materials & Structures,2018,41(2):425-439.
[120] 王新刚,徐馷悉,李尚杰,等. 不确定结构的区间可靠性优化设计[J]. 东北大学学报,2020,41(4):521-527. WANG Xingang,XU Peixi, LI Shangjie, et al. Optimal design of interval reliability for uncertain structures[J]. Journal of Northeastern University,2020,41(4):521-527.
[121] FREITAG S,PETERS S,EDLER P,et al. Reliability-based optimization of structural topologies using artificial neural networks[J]. Probabilistic Engineering Mechanics,2022,70:103356-103367.
[122] HUANG Zelei,JIANG Chao,ZHOU Yisha,et al. Reliability-based design optimization for problems with interval distribution parameters[J]. Structural and Multidisciplinary Optimization,2017,55(2):513-528.
[123] LIU Xin,KUANG Zhixiang,YIN Lairong,et al. Structural reliability analysis based on probability and probability box hybrid model[J]. Structural Safety,2017,68:73-84.
[124] 李放. 基于集成学习法的船舶结构可靠性优化设计研究[D]. 上海:上海交通大学,2020. LI Fang. Reliability-based design optimization research of ship structure based on ensemble learning method[D]. Shanghai:Shanghai Jiao Tong University,2020.
[125] XIN Jiyu,AKIYAMA M,FRANGOPOL D M,et al. Reliability-based life-cycle cost design of asphalt pavement using artificial neural networks[J]. Structure and Infrastructure Engineering,2021,17(6):872-886.
[126] WANG Dongtao,XU Ping,XIAO Xianliang,et al. Multiobjective and multicollision scenario reliability-based design optimization of honeycomb-filled composite energy-absorbing structures for subways[J]. Structural and Multidisciplinary Optimization,2022,65(8):238-262.
[127] SONG Lukai,BAI Guangchen,LI Xueqin,et al. A unified fatigue reliability-based design optimization framework for aircraft turbine disk[J]. International Journal of Fatigue,2021,152:106422-106435.
[128] 杨周,刘盼学,王昊,等. 应用BP神经网络分析电主轴频率可靠性灵敏度[J].哈尔滨工业大学学报,2017,49(1):30-36. YANG Zhou,LIU Panxue,WANG Hao,et al. Frequency reliability-based sensitivity analysis of motorized spindle BP neural networks[J]. Journal of Harbin Institute of Technology,2017,49(1):30-36.
[129] 金燕,刘少军,张建阁. 基于遗传算法优化的人工神经网络下高速滚动轴承的疲劳可靠性[J]. 航空动力学报,2018,33(11):2748-2755. JIN Yan,LIU Shaojun,ZHANG Jiange. Fatigue reliability of high speed bearing based on genetic algorithm optimized artificial neural network[J]. Journal of Aerospace Power,2018,33(11):2748-2755.
[130] DU Yanbin,WU Guoao,TANG Ying,et al. A two-stage reliability allocation method for remanufactured machine tools integrating neural networks and remanufacturing coefficient[J]. Computers & Industrial Engineering,2022,163:107834-107845.
[131] SLOWIK O,LEHKÝ D,NOVÁK D. Reliability-based optimization of a prestressed concrete roof girder using a surrogate model and the double-loop approach[J]. Structural Concrete,2021,22(4):2184-2201.
[132] YAZDANI A,SHAHIDZADEH M S,TAKADA T. Bayesian networks for disaggregation of structural reliability[J]. Structural Safety,2020,82:101892.
[133] WANG Chong,QIU Zhiping,XU Menghui,et al. Mixed nonprobabilistic reliability-based optimization method for heat transfer system with fuzzy and interval parameters[J]. IEEE Transactions on Reliability,2017,66(3):630-640.
[134] VO-DUY T,DUONG-GIA D,HO-HUU V,et al. An effective couple method for reliability-based multi-objective optimization of truss structures with static and dynamic constraints[J]. International Journal of Computational Methods,2020,17(6):1950016.
[135] WU Jinglai,LUO Zhen,LI Hao,et al. A new hybrid uncertainty optimization method for structures using orthogonal series expansion[J]. Applied Mathematical Modelling,2017,45:474-490.
[136] 程贤福. 面向可适应性的稳健性产品平台规划方法[J].机械工程学报,2015,51(19):154-163. CHENG Xianfu. Adaptability-oriented planning method for robust product platform[J]. Journal of Mechanical Engineering,2015,51(19):154-163.
[137] RIEPIN I,SCHMIDT M,BARINGO L,et al. Adaptive robust optimization for European strategic gas infrastructure[J]. Applied Energy,2022,324:e119686.
[138] BACARREZA O,ALIABADI M H,APICELLA A. Robust design and optimization of composite stiffened panels in post-buckling[J]. Structural and Multidisciplinary Optimization,2015,51(2):409-422.
[139] 王栋. 载荷作用位置不确定条件下结构动态稳健性拓扑优化设计[J]. 力学学报,2021,53(5):1439-1448. WANG Dong. Robust dynamic topology optimization of continuum structure subjected to harmonic excitation of loading position uncertainty[J]. Chinese Journal of Theoretical and Applied Mechanics,2021,53(5):1439-1448.
[140] 杨继超,戴宗妙. 不确定载荷下刚架体结构稳健优化设计[J]. 哈尔滨工程大学报,2015,36(5):697-701. YANG Jichao,DAI Zongmiao. Robust optimal design for rigid frame structures with uncertain loading[J]. Journal of Harbin Engineering University,2015,36(5):697-701.
[141] 刘峰,田震,王萌,等. 多开孔耐压柱壳多目标稳健性优化[J]. 华中科技大学学报,2021,49(9):126-132. LIU Feng,TIAN Zhen,WANG Meng,et al. Multi-objective robustness optimization of cylindrical pressure structure with multi-openings[J]. Journal of Huazhong University of Science and Technology, 2021,49(9):126-132.
[142] 凌三强,徐乐,付饶,等. 基于稳健性设计原理的接触件插拔力质量一致性优化方法[J]. 机械工程学报, 2017,53(4):190-197. LING Sanqiang,XU Le,FU Rao,et al. Optimization method of quality consistency for insertion force of electrical contact based on robust design principle[J]. Journal of Mechanical Engineering,2017,53(4):190-197.
[143] 赵欢,高正红,夏露. 高速自然层流翼型高效气动稳健优化设计方法[J]. 航空学报,2022,43(1):271-288. ZHAO Huan,GAO Zhenghong,XIA Lu,et al. Efficient robust aerodynamic design optimization method for high-speed NFL airfoil[J]. Acta Aeronautica et Aeronautica Sinica,2022,43(1):271-288.
[144] 唐新姿,李鹏程,彭锐涛,等. 湍流工况小型风力机翼型气动特性及稳健优化[J]. 机械工程学报,2020, 56(2):192-200. TANG Xinzi,LI Pengcheng,PENG Ruitao,et al. Aerodynamic characteristics and robust optimization of small wind turbine airfoil under turbulence condition[J]. Journal of Mechanical Engineering,2020,56(2):192-200.
[145] 夏志恒,罗佳奇. 考虑来流角变化影响的叶栅稳健性优化设计[J]. 工程热物理学报,2021,42(1):121-129. XIA Zhiheng,LUO Jiaqi. Robust design optimization of a turbing cascade considering the uncertain changes of inlet flow angle[J]. Journal of Engineering Thermophysics,2021,42(1):121-129.
[146] YU J C, CHANG C K, SUPRAYITNO. Robust design optimisation via surrogate network model and soft outer array design[J]. International Journal of Production Research,2018,56(4):1533-1547.
[147] LIN Quan,GONG Lintao,ZHANG Yunlong,et al. A probability of improvement-based multi-fidelity robust optimization approach for aerospace products design[J]. Aerospace Science and Technology,2022,128:107764.
[148] 曹立波,宋志强, 欧阳志高, 等. 集成预紧式安全带的防护性能分析及稳健性优化[J]. 湖南大学学报, 2018, 45(10):54-63. CAO Libo,SONG Zhiqiang,OUYANG Zhigao,et al. Protection performance analysis and robustness optimization for integrated active and passive safety belt[J]. Journal of Hunan University,2018,45(10):54-63.
[149] GOERIGK M,KURTZ J. Data-driven robust optimization using deep neural networks[J]. Computers & Operations Research,2023,151:106087.

复杂产品不确定性智能设计研究综述与展望

Overview and Prospects of Uncertain Intelligent Design for Complex Products

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价

[1]	陶飞, 张辰源, 刘蔚然, 张贺, 马昕, 高鹏飞, 张建康. 数字工程及十个领域应用展望[J]. 机械工程学报, 2023, 59(13): 193-215.
[2]	谢志强, 周伟, 杨静. 工艺树子树循环分解的资源协同综合调度算法[J]. 机械工程学报, 2022, 58(13): 228-239.
[3]	黄彬彬, 张映锋, 黄博, 任杉, 史丽春. 数字孪生驱动的复杂产品智能运维服务体系与核心技术[J]. 机械工程学报, 2022, 58(12): 250-260.
[4]	李玉鹏, 谢卫星, 王晓琳, 任海兵. 考虑变更风险的复杂产品模块划分方法[J]. 机械工程学报, 2021, 57(9): 191-202.
[5]	刘子文, 刘检华, 程益, 庄存波. 基于文本挖掘与神经网络的复杂产品装配工时估算方法[J]. 机械工程学报, 2021, 57(15): 199-210.
[6]	李玉鹏, 李孟泽, 王召同. 基于有向加权网络模型的复杂产品多源设计变更传播路径优化[J]. 机械工程学报, 2019, 55(6): 213-222.
[7]	钟金宏, 白阳. 面向复杂产品开发供应商选择的改进BN模型[J]. 机械工程学报, 2016, 52(1): 175-183.
[8]	李亚平;刘思峰;方志耕. 面向质量的大型复杂产品总体参数多主体协同设计ESTA-HoQ网络模型[J]. , 2014, 50(20): 195-204.
[9]	林忠钦;来新民;金隼;王皓;朱利民;陈关龙. 复杂产品制造精度控制的数字化方法及其发展趋势[J]. , 2013, 49(6): 103-113.
[10]	任彬;张树有;伊国栋. 基于模糊多属性决策的复杂产品配置方法[J]. , 2010, 46(19): 108-116.
[11]	孟祥慧;谢友柏;戴旭东. 面向复杂产品时变性能设计的理论与方法[J]. , 2010, 46(1): 128-133.