融合RE与BID的产品创新方法研究及应用

doi:10.3901/JME.2022.23.227

机械工程学报 ›› 2022, Vol. 58 ›› Issue (23): 227-239.doi: 10.3901/JME.2022.23.227

扫码分享

融合RE与BID的产品创新方法研究及应用

刘晓敏, 杨栋, 陈亮, 樊帅

福州大学机械工程及自动化学院福州 350116

收稿日期:2022-03-07 修回日期:2022-09-16 出版日期:2022-12-05 发布日期:2023-02-08
作者简介:刘晓敏,男,1971年出生,教授,博士研究生导师。主要研究方向为产品创新方法、集成创新理论和机械仿生技术等。E-mail:lxmliu@fzu.edu.cn;杨栋,男,1995年出生,硕士研究生。主要研究方向为产品创新设计理论及方法。E-mail:505027335@qq.com
基金资助:
国家科技部创新方法工作专项资助项目(2020IM010200)。

Research & Application of Product Innovation Method Incorporating RE and BID

LIU Xiaomin, YANG Dong, CHEN Liang, FAN Shuai

School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116

Received:2022-03-07 Revised:2022-09-16 Online:2022-12-05 Published:2023-02-08

摘要/Abstract

摘要： 针对已有产品的再创新、创新方法选用及创新方向的明确性等问题，提出一种融合逆向工程(Reverse engineering，RE)和生物启发设计(Bio-inspired design，BID)的产品创新过程模型。首先，通过RE对已有产品进行分析，经过结构分解、行为匹配及功能构建等步骤，建立其功能模型；其次，以该模型为基础，搜集产品用户需求，通过需求进化分析、需求重要度计算及功能进化，得到产品概念的功能再创新，进而组合出产品新功能待求解模型；最后，以生物系统逆向工程建模方法为基础，搜索并整理生物案例。利用所建立的生物启发设计辅助系统求解产品新功能，得到产品再创新方案。以方舱医院医护人员用防护服为例，验证了RE与BID融合的产品创新方法具有较好的可行性。

关键词: RE, BID, 需求进化, 产品创新, 防护服

Abstract: Aiming at the re-innovation of existing products, the choice of innovative methods and the clarity of innovative direction, a process model of product innovation combining reverse engineering (RE) with biologically inspired design (BID) was proposed. First, existing products based on RE, their functional models were established through structural decomposition, behavior matching, and functional construction. Secondly, product user needs being collected through demand evolution analysis, importance calculation, and function evolution, the product concept function was re-innovated to form a new function to be solved model. Finally, based on RE modelling method of the biological system to search for and sort out biological cases using the established biologically inspired design auxiliary system, the new functions of system-assisted solution were obtained to make product re-innovation schemes. Taking the protective clothing used by medical staff in the shelter hospital as an example, it is verified that the product innovation methods of RE and BID have a good feasibility.

Key words: reverse engineering, bio-inspired design, demand evolution, product innovation, protective clothing

中图分类号:

TH122

刘晓敏, 杨栋, 陈亮, 樊帅. 融合RE与BID的产品创新方法研究及应用[J]. 机械工程学报, 2022, 58(23): 227-239.

LIU Xiaomin, YANG Dong, CHEN Liang, FAN Shuai. Research & Application of Product Innovation Method Incorporating RE and BID[J]. Journal of Mechanical Engineering, 2022, 58(23): 227-239.

参考文献

[1] 朱保廷. 基于重用的产品设计方法研究[D]. 上海:上海交通大学,2013.ZHU Baoting. Study on product design method based on design reuse[D]. Shanghai:Shanghai Jiao Tong University,2013.
[2] 成思源,杨雪荣. 逆向工程技术[M]. 北京:机械工业出版社, 2017.CHENG Siyuan,YANG Xuerong. Reverse engineering technique[M]. Beijing:China Machine Press,2017.
[3] 赵文勇,刘湘波,吴海江,等. 基于逆向工程的焊接过程有限元模拟[J]. 机械工程学报,2018,54(2):102-109.ZHAO Wenyong,LIU Xiangbo,WU Haijiang,et al. Finite element simulation of welding process based on reverse engineering[J]. Journal of Mechanical Engineering,2018,54(2):102-109.
[4] OTTO K N,WOOD K L. Product design:techniques in reverse engineering and new product development[M]. Upper Saddle River:Prentice-Hall,2001.
[5] TANG D,ZHU R,CHEN X,et al. Functional reverse engineering for re-creation design[C]//Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology,Berlin,Heidelberg:Springer Berlin Heidelberg,2010:185-195.
[6] DURUPT A,REMY S,DUCELLIER G. Knowledge based reverse engineering-an approach for reverse engineering of a mechanical part[J]. Journal of Computing and Information Science in Engineering,2010,10(4):1053-1062.
[7] CALDWELL B W,MOCKO G M. Validation of function pruning rules through similarity at three levels of abstraction[J]. Journal of Mechanical Design,2012,134(4):1-10.
[8] 刘江南,杨小娟,张文博,等. 融合功能倒推与裁剪法的系统创新设计方法[J]. 机械工程学报,2016,52(23):69-76.LIU Jiangnan,YANG Xiaojuan,ZHANG Wenbo,et al. Systematic innovative design by integrating function backtracking with trimming[J]. Journal of Mechanical Engineering,2016,52(23):69-76.
[9] HELMS M,VATTAM S S,GOEL A K. Biologically inspired design:Process and products[J]. Design Studies,2009,30(5):606-622.
[10] TOMPSON L S. The gecko's foot:Bio-inspiration:Engineering new materials from nature[J]. Library Journal,2006,131(5):96-96.
[11] BONSER R. Patented biologically-inspired technological innovations:A twenty year view[J]. Journal of Bionic Engineering,2006,3(1):39-41.
[12] WILSON J O,ROSEN D. Systematic reverse engineering of biological systems[C]//ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. 2008:69-78.
[13] VATTAM S,WILTGEN B,HELMS M,et al. DANE:Fostering creativity in and through biologically inspired design[C]//Design Creativity 2010. London:Springer London,2011:115-122.
[14] HU J,MA J,FENG J F,et al. Research on new creative conceptual design system using adapted case-based reasoning technique[J]. Ai Edam-Artificial Intelligence for Engineering Design Analysis and Manufacturing,2017,31(1):16-29.
[15] 刘晓敏,李娇蓉,陈亮,等. 融合可拓学与多层次知识建模的仿生原型获取[J]. 机械工程学报,2019,55(21):150-160.LIU Xiaomin,LI Jiaorong,CHEN Liang,et al. Bionic prototype acquisition incorporating extension and multi-level knowledge modeling[J]. Journal of Mechanical Engineering,2019,55(21):150-160.
[16] GRAEFF E,MARANZANZ N,AOUSSAT A. A shared framework of reference,a first step toward engineers' and biologists' synergic reasoning in biomimetic design teams[J]. Journal of Mechanical Design,2021,143(4):1-17.
[17] GOEL A K,RUGABER S,VATTAM S. Structure,behavior,and function of complex systems:the structure,behavior,and function modeling language[J]. Ai Edam-Artificial Intelligence for Engineering Design Analysis and Manufacturing,2009,23(1):23-35.
[18] 贾丽臻,于菲,檀润华,等. 基于改进SBF模型的类比设计过程研究[J]. 机械设计,2018,35(11):22-30.JIA Lizhen,YU Fei,TAN Runhua,et al. Research on design-by-analogy based on refined SBF model[J]. Journal of Machine Design,2018,35(11):22-30.
[19] KITAMURA Y,SANO T,NAMBA K,et al. A functional concept ontology and its application to automatic identification of functional structures[J]. Advanced Engineering Informatics,2002,16(2):145-163.
[20] 梁瑞,张建辉,檀润华,等. 已有产品功能创新设计过程模型及应用[J]. 机械工程学报,2016,52(23):50-61.LIANG Rui,ZHANG Jianhui,TAN Runhua,et al. Design process model and application of the existing product function innovation[J]. Journal of Mechanical Engineering,2016,52(23):50-61.
[21] PETROV V. Laws of development of needs[EB/OL]. (2006-03-03).https://the-trizjournal.com/laws-development-needs/.
[22] 姚海,金烨,严隽琪. 产品功能需求的定性及定量分析[J]. 机械工程学报,2010,46(5):191-198.YAO Hai,JIN Ye,YAN Junqi. Qualitative and quantitative analysis of requirements on product function[J]. Journal of Mechanical Engineering,2010,46(5):191-198.
[23] TAN R,LIU W,CAO G,et al. Creative design inspired by biological knowledge:Technologies and methods[J]. Frontiers of Mechanical Engineering,2019,14(1):1-14.
[24] VATTAM S,HELMS M,GOEL A. A content account of creative analogies in biologically inspired design[J]. AI EDAM,2010,24(4):467-481.
[25] 刘晓敏,黄水平,王建辉,等. 基于TRIZ及功能类比的产品概念设计创新[J]. 机械工程学报,2016, 52(23):34-42.LIU Xiaomin,HUANG Shuiping,WANG Jianhui,et al. Conceptual design based on TRIZ & function analogy for product innovation[J]. Journal of Mechanical Engineering,2016,52(23):34-42.
[26] 吴文娟,何丽华,刘波,等. 新冠肺炎疫情期间方舱医院院内感染管理探讨[J]. 中华医院管理杂志,2020,36(4):320-323.WU Wenjuan,HE Lihua,LIU Bo,et al. Nosocomial infection control strategy in cabin hospitals during the epidemic of COVID-19[J]. Chinese Journal of Hospital Administration,2020,36(4):320-323.
[27] 贺润音,吴雨曦,王朝晖,等. 相变材料调温服装调温性能研究进展[J]. 国际纺织导报,2020,48(11):47-54.HE Runyin,WU Yuxi,WANG Zhaohui,et al. Research progress of temperature regulating properties of PCM fabrics[J]. Melliand China,2020,48(11):47-54.

融合RE与BID的产品创新方法研究及应用

Research & Application of Product Innovation Method Incorporating RE and BID

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	孟原, 史宝军, 张德权. Kriging-高维代理模型建模方法研究与改进[J]. 机械工程学报, 2024, 60(5): 249-263.
[2]	傅杨, 张跃, 毛颖, 唐小华, 陈祖高, 徐和武, 杨雨沛, 高斌, 田贵云. 基于Feature Boosting的管道电磁内检测多传感信号缺陷解析算法[J]. 机械工程学报, 2024, 60(20): 51-67.
[3]	王娟, 刘美红, 祝世兴, 陈文博, 李遇贤, 孙军锋. 指尖密封结构参数的多目标混合教与学优化方法[J]. 机械工程学报, 2023, 59(9): 157-170.
[4]	郭洪飞, 陆鑫宇, 任亚平, 张超勇, 李建庆. 基于强化学习的群体进化算法求解双边多目标同步并行拆解线平衡问题[J]. 机械工程学报, 2023, 59(7): 355-366.
[5]	石照耀, 赵保亚, 于渤, 郭晓忠. 齿轮三维误差表征与分解[J]. 机械工程学报, 2022, 58(6): 1-9.
[6]	张禹, 公健, 唐滋阳, 吕董, 常育嘉, 巩亚东. 基于改进多目标人工蜂群算法的航空发动机管路智能布局方法[J]. 机械工程学报, 2022, 58(4): 277-284.
[7]	黄佳, 贺斟酌, 杨晓光, 石多奇, 孙燕涛. 镍基定向凝固高温合金蠕变寿命预测的改进方法[J]. 机械工程学报, 2022, 58(22): 258-268.
[8]	陈灵, 陈郑平, 李军良, 米为民, 刘铭洋. 基于深度卷积神经网络和合作博弈的多微网实时能量管理策略[J]. 电气工程学报, 2022, 17(2): 215-225.
[9]	许男, 张紫薇, 杨宇航, 许家孟. 考虑参数不确定性的UniTire轮胎模型与车辆稳定性分析[J]. 机械工程学报, 2022, 58(16): 247-257.
[10]	许男, 李小雨. 复合工况下四轮驱动电动汽车操纵稳定性控制[J]. 机械工程学报, 2021, 57(8): 205-220.
[11]	. [J]. 中国电气工程学报（英文）, 2021, 7(1): 1-26.
[12]	. [J]. 中国电气工程学报（英文）, 2021, 7(1): 55-62.
[13]	. [J]. 中国电气工程学报（英文）, 2021, 7(1): 63-72.
[14]	. [J]. 中国电气工程学报（英文）, 2021, 7(1): 73-78.
[15]	. [J]. 中国电气工程学报（英文）, 2021, 7(1): 94-105.