双磁耦合式压电振动俘能器的性能分析与试验

doi:10.3901/JME.2022.20.150

机械工程学报 ›› 2022, Vol. 58 ›› Issue (20): 150-157.doi: 10.3901/JME.2022.20.150

• 特邀专栏：振动俘能器件与系统 • 上一篇下一篇

扫码分享

双磁耦合式压电振动俘能器的性能分析与试验

王淑云¹, 任泽峰¹, 阚君武^1,2, 杨泽盟¹, 张忠华^1,2, 黄乐帅¹, 孟凡许^1,2

1. 浙江师范大学精密机械与智能结构研究所金华 321004;
2. 浙江省城市轨道交通智能运维技术与装备重点实验室金华 321004

收稿日期:2020-12-01 修回日期:2021-12-16 出版日期:2022-10-20 发布日期:2022-12-27
通讯作者: 孟凡许(通信作者)，男，1986年出生，博士，讲师。主要研究方向为振动俘能器、能量回收与自供电技术。E-mail：fanxumeng@zjnu.edu.cn
作者简介:王淑云，女，1965年出生，教授。主要研究方向为工程问题的理论建模、仿真分析及优化。E-mail：wshy888@zjnu.edu.cn
基金资助:
国家自然科学基金(51877199，52077201)、浙江省重点研发计划(2021C01181)、浙江省自然科学基金(LY20F010006)和国家大学生创新创业训练计划(201910345047)资助项目。

Design, Characterization and Testing of Magnetically Coupled Piezoelectric Vibration Energy Harvester Using Double Magnets

WANG Shuyun¹, REN Zefeng¹, KAN Junwu^1,2, YANG Zemeng¹, ZHANG Zhonghua^1,2, HUANG Leshuai¹, MENG Fanxu^1,2

1. Institute of Precision Machinery and Smart Structure, Zhejiang Normal University, Jinhua 321004;
2. Key Laboratory of Urban Rail Transit Intelligent Operation and Maintenance Technology andEquipment of Zhejiang Province, Zhejiang Normal University, Jinhua 321004

Received:2020-12-01 Revised:2021-12-16 Online:2022-10-20 Published:2022-12-27

摘要/Abstract

摘要： 为满足远程监测系统的自供电需求，针对现有压电振动俘能器存在的问题，提出一种双磁耦合式压电振动俘能器，通过将压电振子对称安装于辅助悬臂梁两侧构成组合换能器，使压电片在俘能过程中主要受压应力。经建模仿真，获得了定磁铁间距与水平耦合间距对系统势能的影响规律，以及不同激励条件下的系统动力学响应特性。为验证俘能器原理的可行性与仿真结果的正确性，制作了样机并测试了不同条件下俘能器的输出特性。结果表明：激励频率对俘能器输出波形影响较大；选取适当的定磁铁间距和水平耦合间距(11 mm≤d≤12 mm，10 mm≤l≤16 mm)，可有效降低俘能器固有频率、拓宽频带且幅频特性曲线较为平坦，进而提高了俘能器的环境适应性和可靠性；激励频率为12 Hz、16 Hz及20 Hz时，试验所获得的最大输出功率分别为1.27 mW、2.88 mW及5.31 mW，其所对应的最佳匹配电阻约为70 kΩ。

关键词: 压电, 振动俘能器, 磁耦合, 组合换能器, 宽频

Abstract: In view of some drawbacks of many existing piezoelectric vibrator energy harvesters, a magnetically coupled piezoelectric vibration energy harvester using double magnets is proposed to meet the demands of self-powered remote monitoring systems in this paper. This harvester was characterized by the combined transducer, where two piezoelectric vibrators were symmetrically fixed on each side of the additional elastic beam and thus the vibrators were mainly subjected to the unidirectional compressive stress. To figure out the effect of the involved structural parameters on the harvester’s performance, the simulation was firstly conducted based on the theoretical modelling. The results indicated that the vertical distance between two fixed magnets as well as the horizontal distance between the fixed magnet and movable magnet brought a significant impact on the potential energy of the system. Also, the dynamic response characteristics of the harvester under different excitation situations were obtained. Then, a harvester prototype was fabricated and its output characteristics was tested to verify the feasibility of the energy harvester and the correctness of the simulation results. The experimental results showed that the excitation frequency had a great influence on the output voltage waveform of the energy harvester. Meanwhile, with an appropriate vertical and horizontal distance (11≤d≤12 mm, 10≤l≤16 mm), not only the natural frequency of the energy harvester could be significantly reduced and the working bandwidth could be broadened, but also a relatively flat voltage-frequency curve could be obtained in a quite wide frequency range. Thus, the environmental adaptability and reliability of the energy harvester was further improved. Besides, the maximum output powers of 1.27 mW, 2.88 mW and 5.31 mW were achieved with an optimal load resistance of 70 kΩ at the excitation frequency of 12 Hz, 16 Hz and 20 Hz, respectively.

Key words: piezoelectric, vibration energy harvester, magnetic coupling, combined transducer, broadband

中图分类号:

TN384
TM619

王淑云, 任泽峰, 阚君武, 杨泽盟, 张忠华, 黄乐帅, 孟凡许. 双磁耦合式压电振动俘能器的性能分析与试验[J]. 机械工程学报, 2022, 58(20): 150-157.

WANG Shuyun, REN Zefeng, KAN Junwu, YANG Zemeng, ZHANG Zhonghua, HUANG Leshuai, MENG Fanxu. Design, Characterization and Testing of Magnetically Coupled Piezoelectric Vibration Energy Harvester Using Double Magnets[J]. Journal of Mechanical Engineering, 2022, 58(20): 150-157.

参考文献

[1] 阚君武，张肖逸，王淑云，等. 一种错位旋磁激励压电俘能器[J]. 中国机械工程，2016，27(16):2207-2210. KAN Junwu，ZHANG Xiaoyi，WANG Shuyun，et al. A piezoelectric harvester excited by malposed rotary magnets[J]. China Mechanical Engineering，2016，27(16): 2207-2210.
[2] ZHANG Z，WANG S，KAN J，et al. A pneumatic piezoelectric vibration energy harvester based on the compressed air-transducer-structure interaction[J]. Energy Conversion and Management，2010，213:112861.
[3] FAN K，LIU J，CAI M，et al. Exploiting ultralow-frequency energy via vibration-to-rotation conversion of a rope-spun rotor[J]. Energy Conversion and Management，2020，225:113433.
[4] WANG J，GENG L，DING L，et al. The state-of-the-art review on energy harvesting from flow-induced vibrations[J]. Applied Energy，2020，267:114902.
[5] TRAN N，GHAYESH M H，ARJOMANDI M. Ambient vibration energy harvesters:A review on nonlinear techniques for performance enhancement[J]. International Journal of Engineering Science，2018，127:162-185.
[6] 樊康旗，刘朝辉，王连松，等. 从人体行走中收集能量的鞋上压电俘能器[J]. 光学精密工程，2017，25(5):1272-1280. FAN Kangqi，LIU Zhaohui，WANG Liansong，et al. Shoe-mounted piezoelectric energy harvester for collecting energy from human walking[J]. Optics and Precision Engineering，2017，25(5):1272-1280.
[7] KAN J，FU J，WANG S，et al. Study on a piezo-disk energy harvester excited by rotary magnets [J]. Energy，2017，122:62-69.
[8] ZHANG Z，KAN J，WANG S，et al. Performance dependence on initial free-end levitation of a magnetically levitated piezoelectric vibration energy harvester with a composite cantilever beam[J]. IEEE Access，2017，5:27563-27572.
[9] SIDDIQUE A R，MAHMUD S，van HEYST B，et al. A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms[J]. Energy Conversion and Management，2015，106:728-747.
[10] 王淑云，余杰，阚君武，等. 腔式压电气流发电机结构与性能研究 [J]. 农业机械学报，2018，49(1):421-425. WANG Shuyun，YU Jie，KAN Junwu，et al. Structure and performance of piezoelectric airflow energy harvester [J]. Transactions of the Chinses Society for Agricultural Machinery，2018，49(1):421-425.
[11] JI H，QIU J，ZHU K. Vibration control of a composite beam using self-sensing semi-active approach[J]. Chinese Journal of Mechanical Engineering，2010，23(5):663-670.
[12] 耿彦超，胡嘉骏，汪雪良，等. 基于模型试验的江海直达船波激振动与砰击载荷研究[J]. 中国造船，2014，55(3):43-52. GENG Yanchao，HU Jiajun，WANG Xueliang，et al. Investigation of spring and slamming loads on river-to-sea ships by model test[J]. Shipbuilding of China，2014，55(3):43-52.
[13] 武俊达，董大伟，闫兵，等. 液压模块挂车刚柔耦合动态响应特性及摆臂疲劳分析[J]. 振动与冲击，2014，33(7):37-44. WU Junda，DONG Dawei，YAN Bing，et al. Dynamic response characteristics and swing-arm fatigue analysis for a hydraulic modular trailer based on rigid-flexible coupling simulation[J]. Journal of Vibration and Shock，2014，33(7):37-44.
[14] 姚丙盟，刘志平，李文锋. 基于双稳态的振动能量收集系统的设计[J]. 中国机械工程，2015，26(13):1736-1741. YAO Bingmeng，LIU Zhiping，LI Wenfeng. Design of vibration energy harvester based on bistability[J]. China Mechanical Engineering，2015，26(13):1736-1741.
[15] YANG Z，YANG J. Connected vibrating piezoelectric bimorph beams as a wide-band piezoelectric power harvester[J]. Journal of Intelligent Material Systems and Structures，2009，20(5):569-574.
[16] MASANA R，DAQAQ M F. Relative performance of a vibratory energy harvester in mono-and bi-stable potentials[J]. Journal of Sound and Vibration，2011，330(24):6036-6052.
[17] LIU H，LEE C，KOBAYASHI T，et al. Investigation of piezoelectric mems-based wideband energy harvesting system with assembled frequency-up-conversion mechanism[J]. Procedia Engineering，2011，25:725-728.
[18] HE X Q，RAFIEE M，MAREISHI S. Nonlinear dynamics of piezoelectric nanocomposite energy harvesters under parametric resonance[J]. Nonlinear Dynamics，2015，79(3):1863-1880.
[19] ANDÒ B，BAGLIO S，TRIGONA C，et al. Nonlinear mechanism in MEMS devices for energy harvesting applications[J]. Journal of Micromechanics and Microengineering，2010，20(12):125020.
[20] 王淑云，富佳伟，阚君武，等. 一种脱涡纵振式压电管道气流俘能器[J]. 机械工程学报，2019，55(8):24-29. WANG Shuyun，FU Jiawei，KAN Junwu，et al. A pipe airflows piezoelectric energy harvester with longitudinal vibration excited by vortex shedding [J]. Journal of Mechanical Engineering，2019，55(8):24-29.

双磁耦合式压电振动俘能器的性能分析与试验

Design, Characterization and Testing of Magnetically Coupled Piezoelectric Vibration Energy Harvester Using Double Magnets

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	曾少昔, 赵春田, 李红梅. 铁磁材料漏磁信号对拉伸应力的响应研究[J]. 机械工程学报, 2024, 60(20): 68-76.
[2]	李鸿濠, 卢志荣, 王晓明, 谭述君, 周文雅. 基于加速度表征目标函数的主动反射器最优动态变形控制[J]. 机械工程学报, 2024, 60(19): 32-39.
[3]	田波, 娄军强, 沈家旭, 柳丽, 陈特欢, 李国平, 魏燕定. 可用于微创手术的毫米级微小并联机器人的设计、制造及实现[J]. 机械工程学报, 2024, 60(17): 147-155.
[4]	周建熹, 林金帆, 洪晓斌, 杨定民. 承力索可调节力压电式阵列超声导波传感器设计与损伤检测[J]. 机械工程学报, 2024, 60(14): 42-50.
[5]	许锰, 杨依领, 吴高华, 崔玉国, 魏燕定. 二自由度并联压电粘滑定位平台[J]. 机械工程学报, 2024, 60(11): 250-258.
[6]	胡学永, 宁晓雁, 刘骁, 颜靖东. 地铁-电网磁耦合电流在电网回路中分布特性研究^*[J]. 电气工程学报, 2023, 18(3): 73-80.
[7]	宾光富, 钟新利, 张阳演, 杨峰, 陈安华. 基于压电驱动浮环轴承间隙可调的涡轮增压器转子瞬变振动主动控制[J]. 机械工程学报, 2023, 59(18): 31-41.
[8]	严秋锋, 孙婉婷, 王红梅. 变截面圆弧形流管无阀压电泵的理论与试验研究[J]. 机械工程学报, 2023, 59(14): 320-327.
[9]	赖禹同, 郭锋, 唐自强, 郝伯强. 双负载磁谐振S-LCL无线充电系统频率分叉分析[J]. 电气工程学报, 2023, 18(1): 86-93.
[10]	申东旭, 吕超, 葛亚明, 张刚, 杨大智, 王立欣. 基于机械振动信号的锂离子电池组连接故障诊断[J]. 机械工程学报, 2022, 58(22): 56-68.
[11]	吴义鹏, 李森, 蓝春波, 周圣鹏, 谢维泰, 裘进浩, 季宏丽. 压电能量俘获结构及其升频转换技术的发展现状[J]. 机械工程学报, 2022, 58(20): 27-45.
[12]	于家豪, 陶凯. 振动俘能技术在可穿戴领域的应用[J]. 机械工程学报, 2022, 58(20): 46-71.
[13]	黄曼娟, 冯孝为, 刘会聪, 孙立宁. 基于双稳态磁耦合效应的瓦级高功率电磁振动能量收集器[J]. 机械工程学报, 2022, 58(20): 92-100.
[14]	单小彪, 隋广东, 田海港, 王艺聪, 谢涛. 潜水式尾流激振压电俘能器的输出性能研究[J]. 机械工程学报, 2022, 58(20): 101-110.
[15]	侯成伟, 单小彪, 宋汝君, 谢涛. 风向自适应型涡激振动压电俘能器的试验研究[J]. 机械工程学报, 2022, 58(20): 120-127.