考虑接触参数与摩擦生热交互影响的高速角接触球轴承温升预测研究

doi:10.3901/JME.2021.07.061

机械工程学报 ›› 2021, Vol. 57 ›› Issue (7): 61-67.doi: 10.3901/JME.2021.07.061

扫码分享

考虑接触参数与摩擦生热交互影响的高速角接触球轴承温升预测研究

靳岚^1,2, 芮执元^1,2, 蒋海元^1,2, 潘建龙^1,2

1. 兰州理工大学机电工程学院兰州 730050;
2. 兰州理工大学有色冶金新装备教育部工程研究中心兰州 730050

收稿日期:2020-07-01 修回日期:2021-01-18 出版日期:2021-04-05 发布日期:2021-05-25
作者简介:靳岚，女，1972年出生，副教授。主要研究方向为机械系统动力学。E-mail：lan_jane@126.com
基金资助:
国家自然科学基金资助项目(51965035)。

Research on Prediction of Temperature Rise of High Speed Angular Contact Ball Bearing Considering Interaction between Contact Parameters and Friction Heat

JIN Lan^1,2, RUI Zhiyuan^1,2, JIANG Haiyuan^1,2, PAN Jianlong^1,2

1. School of Mechanical and Electronic Engineering, Lanzhou University of Technology, Lanzhu 730050;
2. Engineering Research Center for Nonferrous Metallurgical New Equipment, Lanzhou University of Technology, Lanzhu 730050

Received:2020-07-01 Revised:2021-01-18 Online:2021-04-05 Published:2021-05-25

摘要/Abstract

摘要： 为精确预测高速角接触球轴承在实际工况下的温升，通过对角接触球轴承的生热机理分析，提出一种考虑接触参数与摩擦生热交互影响的高速角接触球轴承温升预测方法。利用Abaqus有限元软件脚本接口技术，自主编制Python脚本程序，实时提取受载的角接触轴承的接触参数为初始量，计算轴承摩擦生热量，将其作为时变热载荷，加载至有限元模型上，求解在径向载荷和转速作用下的高速角接触球轴承温升，得到接触参数、摩擦生热量、温升之间的相互影响关系，最后采用轴承温升实验对数值模拟结果进行验证。结果表明：考虑接触参数与摩擦生热交互影响下的高速角接触球轴承温升预测方法更符合实际工况。

关键词: 接触参数, 摩擦生热, 交互影响, 高速角接触球轴承, 温升预测

Abstract: A new method of is put forward for predicting accurately the temperature rise of high-speed angular contact ball bearing considering the interaction between contact parameters and frictional heat generation under the actual working state in this paper. The contact parameters, of which the loaded angular contact ball bearings are read from the extracted code in real time using the Python script independently compiled with Abaqus software, is the initial variables to calculate the bearing friction heat generation. It is used as a time-varying thermal loads to the finite element model for solving the temperature rise of high-speed angular contact ball bearings under the radial load and rotation speed. Finally, the interactions of the contact parameters, frictional heat generation, and temperature rise can be received. The result shows that the method of predicting the temperature rise of high-speed angular contact ball bearings under the interaction of contact parameters and frictional heat generation is more in line with the actual working conditions.

Key words: contact parameters, friction heat, interaction, high speed angular contact ball bearing, prediction of temperature rise

中图分类号:

TH133

靳岚, 芮执元, 蒋海元, 潘建龙. 考虑接触参数与摩擦生热交互影响的高速角接触球轴承温升预测研究[J]. 机械工程学报, 2021, 57(7): 61-67.

JIN Lan, RUI Zhiyuan, JIANG Haiyuan, PAN Jianlong. Research on Prediction of Temperature Rise of High Speed Angular Contact Ball Bearing Considering Interaction between Contact Parameters and Friction Heat[J]. Journal of Mechanical Engineering, 2021, 57(7): 61-67.

参考文献

[1] 宁练,周子民. 滚动轴承内部温度状态监测技术[J]. 轴承,2007(2):25-27,51.NING Lian,ZHOU Zimin. Research on condition mon itoring,technique for internal temperature of rolling bearings[J]. Bearing,2007(2):25-27,51.
[2] 王燕霜,刘詰,祝海峰. 轴连轴承温度场分析[J]. 机械工程学报,2011,47(17):84-91.WANG Yanshuang,LIU Jie,ZHU Haifeng. Temperature field analysis of bearing with shaft[J]. Journal of Mechanical Engineering,2011,47(17):84-91.
[3] 金燕,刘少军,张建阁. 高速角接触球轴承热分析及试验验证[J]. 轴承,2018(12):30-33,38.JIN Yan,LIU Shaojun,ZHANG Jiange. Thermal analysis and experimental verification for high speed angular contact ball bearings[J]. Bearing, 2018(12):30-33,38.
[4] 俞锋,李松生,邵娟,等. 高速角接触球轴承生热分析及温度场研究[J]. 工业控制计算机,2015(8):120-121. YU Feng,LI Songsheng,SHAO Juan,et al. Thermal and temperature field analysis of high-speed angular contact ball bearing[J]. Industrial Control Computer,2015(8):120-121.
[5] 陈维福. 机床进给系统轴承热特性分析及试验研究[D]. 南京:南京理工大学,2015.CHEN Weifu. Thermal characteristics analysis and experimental study of bearing in machine tool feed system[D]. Nanjing:Nanjing University of Science and Technology,2015.
[6] HAO X,YUN X,HAN Q. Thermal-fluid-solid coupling in thermal characteristics analysis of rolling bearing system under oil lubrication[J]. Journal of Technology,2019,142(3):1-41.
[7] KIM K S,LEE D W,LEE S M,et al. A numerical approach to determine the frictional torque and temperature of an angular contact ball bearing in a spindle system[J]. International Journal of Precision Engineering and Manufacturing,2015,16(1):135-142.
[8] 胡小秋,陈维福. 角接触球轴承热特性分析及试验[J]. 西安交通大学学报,2015,49(2):106-110.HU Xiaoqiu,CHEN Weifu. Thermal characteristics analysis and experiment for angular contact ball bearing[J]. Journal of Xi'an Jiaotong University,2015,49(2):106-110.
[9] 张丽秀,李超群,李金鹏,等. 高速高精度电主轴温升预测模型[J]. 机械工程学报,2017,53(23):129-136. ZHANG Lixiu,LI Chaoqun,LI Jinpeng,et al. The temperature prediction mode of high speed and high precision motorized spindle[J]. Journal of Mechanical Engineering,2017,53(23):129-136.
[10] 雷默涵,姜歌东,梅雪松,等. 高速球轴承微接触弹流摩擦及生热分析[J]. 西安交通大学学报,2016,50(4):81-88.LEI Mohan,JIANG Gedong,MEI Xuesong,et al. Micro-contact EHL friction and heat generation analysis of high speed ball bearings[J]. Journal of Xi'an Jiaotong University,2016,50(4):81-88.
[11] CRECELIUS W J,PIRCIS J. Computer program operation manual on SHABERTH. A computer program for the analysis of the steady state and transient thermal performance of shaft-bearing systems[R]. ADA042981,1976.
[12] HARRIS T A,KOTZALAS M N. 滚动轴承分析[M]. 罗继伟,马伟,杨咸启,等译. 北京:机械工业出版社,2010.HARRIS T A,KOTZALAS M N. Advanced concepts of bearing technology[M]. Translated by LUO Jiwei,MA Wei,TANG Xianqi,et al. Translation. Beijing:China Machine Press,2010
[13] 王黎钦,陈观慈,古乐,等.高速圆柱滚子轴承工作温度研究[J].航空动力学报,2008,23(1):179-183.WANG Liqin,CHEN Guangci, GU Le,et al. Stady on operating temperature of high-speed cylindrical roller bearings[J]. Journal of Aerospace Power,2008,23(1):179-183.

考虑接触参数与摩擦生热交互影响的高速角接触球轴承温升预测研究

Research on Prediction of Temperature Rise of High Speed Angular Contact Ball Bearing Considering Interaction between Contact Parameters and Friction Heat

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	安琪, 索双富, 林福严, 白玉柱, 耿海旭, 时剑文. 平面磨削粗糙表面的微观接触模型[J]. 机械工程学报, 2020, 56(7): 240-248.
[2]	李智, 薛红前. 超声疲劳裂纹扩展与摩擦生热研究[J]. 机械工程学报, 2016, 52(4): 103-110.