非圆齿轮设计、制造、检测及应用

doi:10.3901/JME.2020.09.055

摘要/Abstract

摘要： 非圆齿轮最早可追溯到14世纪左右，如今已有700多年历史。然而非圆齿轮的研究历史却并不那么久远，受限于非圆齿轮特殊的几何特性及落后的工业技术水平，非圆齿轮在过去一直未被广泛应用，相关研究亦少之又少。进入21世纪后，计算机辅助设计制造技术的迅猛发展，给非圆齿轮领域带来了新的活力，涌现出大量新的研究成果。鉴于此，归纳总结现阶段非圆齿轮（以非圆柱状齿轮为主）研究现状、预测非圆齿轮领域未来发展方向是很有意义的。现阶段，非圆齿轮领域主要可分为设计与分析、制造、检测及应用四个主要研究领域，通过对上述领域常用理论与方法的总结，可以看出各领域现阶段所面对的问题，预测今后发展方向，以期启发非圆齿轮领域的研究者们，进一步推动非圆齿轮发展与应用。

关键词: 非圆齿轮, 设计与分析, 制造, 检测, 应用

Abstract: Non-circular gears appeared as early as the 14th century and have a history of more than 700 years. However, the research of non-circular gears is not as long as its history. Due to the special geometry of non-circular gears and the restriction of the design, analysis, manufacture and testing technology in the past, non-circular gears have not been widely used. Nowadays, with the development of computer technology, non-circular gears have again attracted the researchers' attention. In many studies, non-circular gears have applied to more and more application areas. In order to inspire researchers in this field and expand the application field of non-circular gears, the background and development of non-circular gears (mainly cylindrical gears) in the four main research fields:design and analysis, manufacture, testing and application have been summarized and analyzed. Then, the advantages and disadvantages of various theories and methods in the above research fields have been summarized, as well as the problems faced and the possible future development directions.

Key words: non-circular gear, design and analysis, manufacturing, testing, application

中图分类号:

TH11

李渤涛, 陈定方. 非圆齿轮设计、制造、检测及应用[J]. 机械工程学报, 2020, 56(9): 55-72.

LI Botao, CHEN Dingfang. Design, Manufacture, Inspection and Application of Non-circular Gears[J]. Journal of Mechanical Engineering, 2020, 56(9): 55-72.

参考文献

[1] 陈定方,孔建益,杨家军,等. 现代机械设计师手册(上册)[M]. 北京:机械工业出版社, 2014. CHEN Dingfang, KONG Jianyi, YANG Jiajun, et al. Handbook of modern mechanical designers (Volume 1)[M]. Beijing:China Machine Press, 2014.
[2] ADDOMINE M, FIGLIOLINI G, PENNESTRI E. A landmark in the history of non-circular gears design:The mechanical masterpiece of dondi's astrarium[J]. Mechanism & Machine Theory, 2018, 122:219-232.
[3] CHENG Kai, NIU Zhichao, WANG R C, et al. Smart cutting tools and smart machining:Development approaches, and their implementation and application perspectives[J]. Chinese Journal of Mechanical Engineering, 2017(30):1162-1176.
[4] 叶军,陈建能,赵雄,等. 一种新型类偏心圆非圆齿轮设计及其应用[J]. 中国机械工程, 2018, 29(5):565-571, 578. YE Jun, CHEN Jianneng, ZHAO Xiong, et al. Design and applications of generalized eccentric noncircular gears[J]. China Mechanical Engineering, 2018, 29(5):565-571, 578.
[5] XIE Z H, QIU D M. Study on high-order elliptical gear parametric design, automatic modeling and motion simulation[J]. Applied Mechanics and Materials, 2012, 271-272:1147-1154.
[6] 张瑞,吴序堂,聂钢,等. 高阶变性椭圆齿轮的研究与设计[J]. 西安交通大学学报, 2005(7):726-730. ZHANG Rui, WU Xutang, NIE Gang, et al. Study and design on high-order deformed elliptic gears[J]. Journal of Xi'an Jiaotong University, 2005(7):726-730.
[7] LIN Chao, XIA Xiguang, LI Peiliu. Geometric design and kinematics analysis of coplanar double internal meshing non-circular planetary gear train[J]. Advances in Mechanical Engineering, 2018, 10(12):1-12.
[8] 刘永平,王鹏,县喜龙,等. Pascal蜗线型齿轮齿廓设计[J]. 机械传动, 2015, 39(3):50-52. LIU Yongping, WANG Peng, XIAN Xilong, et al. Design of the tooth profile of pascal curve gear[J]. Mechanical Transmission, 2015, 39(3):50-52.
[9] 刘生林,黄先祥,吴序堂. 用三次样条进行非圆齿轮节曲线设计的研究[J]. 机械设计, 1999(5):21-22, 40, 43. LIU Shenglin,HUANG Xianxiang,WU Xutang. Study on the pitch curve design of non-circular gears with cubic spline[J]. Mechanical Design, 1999(5):21-22, 40, 43.
[10] FANGHELLA P. Kinematic synthesis and design of non-circular gears through a symbolic-numeric modeling approach[C]//ASME International Design Engineering Technical Conferences & Computers & Information in Engineering Conference. September 24-28, 2005, Long Beach, California. New York:DETC, 2005:781-789.
[11] FIGLIOLINI G, STACHEL H, ANGELES J. Base curves of involute cylindrical gears via aronhold's first theorem[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2016, 230(7-8):1233-1242.
[12] 俞高红,虞佳萍,童俊华,等. 一种共轭凹凸型非圆齿轮机构的设计[J]. 中国机械工程, 2016, 27(16):2155-2159, 2165. YU Gaohong, YU Jiaping, TONG Junhua, et al. Design of a conjugate concave-convex non-circular gear mechanism[J]. China Mechanical Engineering,2016,27(16):2155-2159, 2165.
[13] 刘琴琴,吕刚,邓星桥. 基于样条插值方法的非圆齿轮节曲线设计缺陷的修正[J]. 机械传动, 2018, 42(5):90-95. LIU Qinqin, LÜ Gang, DENG Xingqiao. Modification of the pitch curve design defect of non-circular gear based on spline interpolation method[J]. Journal of Mechanical Transmission, 2018, 42(5):90-95.
[14] ZHENG Fangyan, HUA Ling, HAN Xinghui. The mathematical model and mechanical properties of variable center distance gears based on screw theory[J]. Mechanism and Machine Theory, 2016, 101:116-139.
[15] SUN Ke, ZHENG Fangyan, CHEN Dingfang, et al. Design method and analysis of non-circular gear based on variable ratio function[J]. Journal of Mechanical Transmission, 2013, 8351:544-552.
[16] DAI Jiansheng. Screw algebra and kinematic approaches for mechanisms and robotics[M]. London:Springer, 2014..
[17] LITVIN F L. Gear geometry and applied theory[M]. USA:Prentice-Hall, 1994.
[18] 吴序堂. 齿轮啮合原理[M]. 西安:西安交通大学出版社, 2009. WU Xutang. Theory of gearing[M]. Xi'an:Xi'an Jiaotong University Press, 2009.
[19] 高雪强,葛敬侠. SolidWorks中的非圆齿轮实体建模方法研究[J]. 工程图学学报, 2009, 30(4):189-192. GAO Xueqiang, GE Jingxia. Study on parametric solid modeling of non-circular gear in solidworks[J]. Journal of Engineering Graphics, 2009, 30(4):189-192.
[20] LOZZI A. Non-circular gears-graphic generation of involutes and base outlines[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2000, 214(3):411-422.
[21] 刘永平,王鹏,李佳. 解析法设计椭圆齿轮齿廓[J]. 机械设计与制造, 2015, 288(2):214-216, 220. LIU Yongping, WANG Peng, LI Jia. Design the elliptical gear tooth profile via analytical method[J]. Machinery Design & Manufacture, 2015, 288(2):214-216, 220.
[22] 胡赤兵,姚洪辉. 基于MATLAB及Pro/E的参数化非圆齿轮设计[J]. 机械传动, 2010, 34(7):33-35, 38. HU Chibing, YAO Honghui. The parametric design research of noncirle gear based on matlab and pro/e[J]. Journal of Mechanical Transmission, 2010, 34(7):33-35, 38.
[23] 武传宇,金玉珍,贺磊盈. 基于包络特征的非圆齿轮齿廓计算方法研究[J]. 中国机械工程, 2008, 255(15):1796-1799. WU Chuanyu, JIN Yuzhen, HE Leiying. Numerical algorithm of tooth profile of noncircular gear based on the characteristics of cutter envelope[J]. China Mechanical Engineering, 2008, 255(15):1796-1799.
[24] LYASHKOV A A, PANCHUK K L, KHASANOVA I A. Automated geometric and computer-aided non-circular gear formation modeling[J]. Journal of Physics:Conference Series, 2018, 1050:012049.
[25] 李建刚,吴序堂,李泽湘. 基于插齿数值计算模型的非圆齿轮根切分析[J]. 农业机械学报, 2007(6):138-142. LI Jiangang, WU Xutang, LI Zexiang. Analysis of tooth undercutting in noncircular gears based on numerical computation model of shaping[J]. Journal of Agricultural Machinery, 2007(6):138-142.
[26] 李建刚,吴序堂,毛世民,等. 非圆齿轮齿廓数值计算的研究[J]. 西安交通大学学报, 2005(1):75-78. LI Jiangang, WU Xutang, MAO Shimin, et al. Numerical computation of tooth profile of noncircular gear[J]. Journal of Xi'an Jiaotong University, 2005(1):75-78.
[27] 张健,饶鹏,郑彬,等. 非圆齿轮设计及其运动学分析[J]. 机械研究与应用, 2018, 31(2):38-42. ZHANG jian, RAO Peng, ZHENG Bin, et al. Design and kinematics analysis of non-circular gear[J]. Mechanical Research & Application, 2018, 31(2):38-42.
[28] 刘永平,董长斌,安建民,等. 新型抽油机换向装置结构设计及运动仿真分析[J]. 机械传动, 2017, 41(9):115-118, 134. LIU Yongping, DONG Changbin, AN Jianmin, et al. Analysis of motion simulation and structure design of the reversing device of new pumping unit[J]. Mechanical Transmission, 2017, 41(9):115-118, 134.
[29] HU Chibing,TIAN Fangyong,JIANG Yancang. Elliptical gears parametric design and motion simulation[J]. Advanced Materials Research,2010,139-141:1206-1210.
[30] CHEN Jianneng. Establishment & verification of dynamics mode of seedling pushingin transplanting mechanism with planetary elliptic gears[J]. Transactions of the CSAE, 2003, 19(5):71-76.
[31] SUN Chuanqiong, SUN Guoxing, REN Aihua, et al. The kinematic analysis of heart-shaped gear continuously variable transmission[J]. Applied Mechanics and Materials, 2010, 37-38:1489-1492.
[32] LIU X, NAGAMURA K, IKEJO K. Analysis of the dynamic characteristics of elliptical gears[J]. Journal of Advanced Mechanical Design Systems and Manufacturing, 2012, 6(4):484-497.
[33] ZHANG Min, KONG Deyong, Zhao Jiali, et al. Solid modeling methods and wire-cutting process simulation of non-circular gears[J]. Applied Mechanics and Materials, 2011, 86:730-734.
[34] HU Chibing, WANG Yazhou, KONG Deyong, et al. The solid modeling and simulation for non-circular gear based on pro/e[J]. Advanced Materials Research, 2011, 230-232:506-511.
[35] ZHENG Fangyan, HAN Xinghui, LIN Hua. Design and manufacture of new type of non-circular cylindrical gear generated by face-milling method[J]. Mechanism and Machine Theory, 2018, 122:326-346.
[36] 侯东海,刘忠明,吴序堂. 用工具斜齿条法加工斜齿非圆齿轮的啮合理论模型[J]. 机械工程学报, 2003(8):49-54. HOU Donghai, LIU Zhongming, WU Xutang. Meshing theory analysis model for the manufacturing of helical non-circular gear by the helical tooling rack generating method[J]. Journal of Mechanical Engineering, 2003(8):49-54.
[37] LIU Youyu. Study of optimal strategy and linkage-model for external non-circular helical gears shaping[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2015, 229(3):493-504.
[38] LI Bo, HE Jun, ZHENG Fangzheng, et al. Research on three-axis linkage shaping technology for non-circular internal gears[J]. China Mechanical Engineering, 2016(6):1455-1460, 1483.
[39] 何贵平,胡赤兵,靳岚,等. 外啮合非圆齿轮加工模型及根切特性研究[J]. 兰州理工大学学报, 2006(6):40-43. HE Guiping, HU Chibing, JIN Lan, et al. Investigation of mathematical model for machining of externally meshed noncircular gears and characteristics of their undercut[J]. Journal of Lanzhou University of Technology, 2006(6):40-43.
[40] ZHENG Fangyan, HUA Lin, HAN Xinghui. Linkage model and manufacturing process of shaping non-circular gears[J]. Mechanism and Machine Theory, 2016, 96, 192-212.
[41] 熊镇芹,吴序堂,毛世民,等. 非圆齿轮插齿加工中的退刀干涉机理及规避方法研究[J]. 机械工程学报, 2002(3):152-155. XIONG Zhenqin, WU Xutang, MAO Shimin, et al. Research on the mechanism and the avoidance method of cutting interference in non-circular gear shaping[J]. Chinese Journal of Mechanical Engineering, 2002(3):152-155.
[42] ZHENG Fangyan, HUA Lin, HAN Xinghui, et al. Synthesis of indexing mechanisms with non-circular gears[J]. Mechanism and Machine Theory, 2016, 105:108-128.
[43] 韩江,高婷,李大柱,等. 非圆齿轮齿面加工余量匀化工艺研究与实现[J]. 中国机械工程, 2018, 29(9):1031-1038. HAN Jiang, GAO Ting, LI Dazhu, et al. Sesearch and implementation of tooth surface machining allowance uniform distribution processing technology of non-circular gears[J]. China Mechanical Engineering, 2018, 29(9):1031-1038.
[44] 谭伟明,胡赤兵,冼伟杰,等. 非圆齿轮滚切最简数学模型及其图形仿真[J]. 机械工程学报, 2001(5):26-29. TAN Weiming, HU Chibing, XIAN Weijie, et al. Concise mathematical model for hobbing non-circular gear and its graphic simulation[J]. Chinese Journal of Mechanical Engineering, 2001(5):26-29.
[45] TIAN Fangyong, HU Chibing, JIANG Yancang. The simplest mathematical model and simultaneous-control structure for hobbing helical non-circular gear[J]. Applied Mechanics and Materials, 2010, 42:284-288.
[46] 史勇, 王生泽. 斜齿非圆齿轮滚齿加工过程仿真研究[J]. 机械设计, 2015, 32(4):19-25. SHI Yong, WANG Shengze. Simulation research on hobbing machining of helical non-circular gear[J]. Journal of Mechanical Design, 2015, 32(4):19-25.
[47] 胡赤兵,丁和艳,严克明,等. 非圆斜齿轮滚切加工CNC联动控制方案[J]. 中国机械工程, 2004(24):15-18. HU Chibing, DING Heyan, YAN Keming, et al. Simultaneous-control methods of CNC for hobbing noncircular helical gears[J]. China Mechanical Engineering, 2004(24):15-18.
[48] LIU Youyu, DIAO Jiesheng. Six-axis linkage strategy and its models for non-circular helical gears based on diagonal hobbing[J]. Strojniski Vestnik-Journal of Mechanical Engineering, 2015, 61(5):330-340.
[49] XIA Lian, LIU Youyu, LI Dazhu. A linkage model and applications of hobbing non-circular helical gears with axial shift of hob[J]. Mechanism and Machine Theory, 2013, 70:32-44.
[50] 高雯雯. 基于全齿测量的非圆齿轮误差分析[D]. 哈尔滨:哈尔滨工业大学, 2016. GAO Wenwen. Research on the error of non-circular gears based on the all teeth measurement method[D]. Harbin:Harbin University of Technology, 2016.
[51] 韩江,高婷,江本赤,等. 非圆齿轮齿廓特性分析及偏差测量方法研究[J]. 电子测量与仪器学报, 2016, 30(10):1520-1533. HAN Jiang, GAO Ting, JIANG Benchi, et al. Tooth profile characteristics analysis and deviation measurement study of non-circular gear[J]. Journal of Electronic Measurement and Instrument, 2016, 30(10):1520-1533.
[52] DAI Jianqing, WANG Shengze. Research on single point error quantization algorithm of non-circular gear tooth profile[J]. Machine Design & Research, 2017, 33(4):68-71.
[53] DAI Jianqing, WANG Shengze. Error detection and classification of tangential radial single machining of non-circular gear[J]. EDP Sciences, 2017, 41(2):88-94.
[54] 刘永平, 孙旋. 非圆齿轮跨棒距测量的数学模型研究[J]. 机械设计与制造, 2014(11):29-32. LIU Yongping, SUN Xuan. Study on the mathematical model for measuring the span of non-circular gears[J]. Machinery Design & Manufacture, 2014(11):29-32.
[55] LIU Yongping, SUN Xuan. Mathematical model research of across the great distance measurement for non-circular gear[J]. Machinery Design & Manufacture, 2014, 5(1):43-56.
[56] LI Bo, ZHANG Hongxiang, CHEN Dingfang, et al. Measurement of composite error of pitch curve of non-circular gear based on C++ and matlab[J]. Human Centered Computing, 2016, 9567:215-225.
[57] 刘永平,县喜龙,王鹏. 非圆齿轮动态特性测试装置与实验分析[J]. 机械传动, 2015, 39(9):126-128. LIU Yongping, XIAN Xilong, WANG Peng. Dynamic characteristic testing device and experiment analysis of non-circular gear[J]. Mechanical Transmission, 2015, 39(9):126-128.
[58] MUNDO D, GATTI G, DOONER D B. Optimized five-bar linkages with non-circular gears for exact path generation[J]. Mechanism and Machine Theory, 2009, 44(4):751-760.
[59] BARI J M, CRANE C D, DOONER D B, et al. The design of a single degree of freedom open-loop spatial mechanism that incorporates geared connections[J]. Design and Manufacturing, 2009(4):631-638.
[60] 俞高红,陈志威,赵匀,等. 椭圆-不完全非圆齿轮行星系蔬菜钵苗取苗机构的研究[J]. 机械工程学报, 2012, 48(13):32-39. YU Gaohong, CHEN Zhiwei, ZHAO Yun, et al. Study on vegetable plug seedling pick-up mechanism of planetary gear train with ellipse gears and incomplete non-circular gear[J]. Journal of Mechanical Engineering, 2012, 48(13):32-39.
[61] 李革,应孔月,张继钊,等. 基于秧针静轨迹的分插机构非圆齿轮求解[J]. 机械工程学报, 2016, 52(1):64-71. LI Ge, YING Kongyue, ZHANG Jizhao, et al. Computation method of non-circular gear based on seedling needle tip point's static trajectory in transplanting mechanism[J]. Journal of Mechanical Engineering, 2016, 52(1):64-71.
[62] YE Bingliang, YI Weiming, YU Gaohong, et al. Optimization design and test of rice plug seedling transplanting mechanism of planetary gear train with incomplete eccentric circular gear and non-circular gears[J]. International Journal of Agricultural & Biological Engineering, 2017, 10(6):43-55.
[63] 王金武,刘亚华,王金峰,等. 全椭圆齿轮行星系液态肥深施机构优化设计与试验[J]. 农业机械学报, 2012, 43(10):59, 60-65. WANG Jinwu, LIU Yahua, WANG Jinfeng, et al. Optimization design and experiment of liquid-fertilizer applying deep-fertilization mechanism for planetary elliptic gears[J]. Journal of Agricultural Machinery,2012, 43(10):59, 60-65.
[64] 陈建能,赵雄,徐宾,等. 椭圆齿轮-曲柄摇杆引纬机构的运动学建模与特性分析[J]. 中国机械工程, 2007, 235(19):2294-2297, 2302. CHEN Jianneng, ZHAO Xiong, XU Bin, et al. Establishment of kinematics models and performance analysis of elliptic-gear & crank-rocker weft insertion mechanism[J]. China Mechanical Engineering, 2007, 235(19):2294-2297, 2302.
[65] WANG Ying, CHEN Jianneng, TAO Honglian, et al. Modeling and analysis of traverse mechanism with eccentric gear and conjugated two-lobed non-circular gear[J]. Textile Research Journal, 2016, 87(17):2106-2116.
[66] 沈俊. 非圆齿轮针杆驱动机构运动学反求设计[D]. 杭州:浙江理工大学, 2017. SHEN Jun. Reserve kinematics design of needle bar driving mechanism with non-circulae gear[D]. Hangzhou:Zhejiang University of Technology, 2017.
[67] 贺敬良,吴序堂,李建刚. 变性椭圆齿轮连杆机构的运动特性及齿轮副设计[J]. 机械工程学报, 2004(1):62-65. HE Jingliang, WU Xutang, LI Jiangang. Kinematic characteristics and gear pair design for deformd elliptical geared linkage mechanism[J]. Chinese Journal of Mechanical Engineering, 2004(1):62-65.
[68] OTTAVIANO E, MUNDO D, DANIELI G A, et al. Numerical and experimental analysis of non-circular gears and cam-follower systems as function generators[J]. Mechanism and Machine Theory, 2008, 43(8):996-1008.
[69] 陈明,王广林,刘福利,等. 叶片差速泵偏心圆-非圆齿轮驱动系统的研究[J]. 机械工程学报, 2005(3):98-101. CHEN Ming, WANG Guanglin,LIU Welfare, et al. Study of eccentric circular-noncircular gears driing system of differential velocity vanes pump[J]. Chinese Journal of Mechanical Engineering, 2005(3):98-101.
[70] DING Hong. Application of non-circular planetary gear mechanism in the gear pump[J]. Advanced Materials Research, 2012, 591-593:2139-2142.
[71] 刘永平,陈向宇,孙旋,等. 抽油机用非圆行星轮系换向装置的设计与仿真[J]. 机械设计与制造, 2018(3):60-63. LIU Yongping, CHEN Xiangyu, SUN Xuan, et al. Design and simulation of non-circular planetary gear train reversing device for pumping unit[J]. Machinery Design & Manufacture, 2018(3):60-63.
[72] OKADA M, TAKEDA Y. Synthesis and evaluation of non-circular gear that realizes optimal gear ratio for jumping robot[C]//Intelligent Robots and Systems (IROS), November 3-11, 2013, Tokyo. Tokyo:IEEE/RSJ International Conference on IROS, 2013:5524-5529.
[73] ZHU Yong, NAKAMURA M, ITO N, et al. Study of wearable knee assistive instruments for walk rehabilitation[J]. Journal of Advanced Mechanical Design Systems and Manufacturing, 2012, 6(2):260-273.
[74] KE Junghuang, SHEN Chiangchen, MENG Ching, et al. A bio-inspired hexapod robot with noncircular gear transmission system[C]//Advanced Intelligent Mechatronics (AIM), July 11-14, 2012, Kachsiung, Taiwan, China. Washington:IEEE, 2012:33-38.
[75] LIU Zheng, ZHUANG Hongchao, GAO Haibo, et al. Static force analysis of foot of electrically driven heavyduty six-legged robot under tripod gait[J]. Chinese Journal of Mechanical Engineering, 2018, 31:63.
[76] DOONER D B, ZAMBRANAM N, GMBH V D B. Use of non-circular gears for crankshaft torque balancing in ic engines[J]. In International Conference on Gears, 2004, 1904:197-212.
[77] BIJLSMA B G, RADAELLI G, HERDER J L. Design of a compact gravity equilibrator with an unlimited range of motion[J]. Journal of Mechanisms and Robotics, 2017, 9(6):061003.
[78] LITVIN F L, GONZALEZ-PEREZ I, FUENTES A, et al. Tandem design of mechanisms for function generation and output speed variation[J]. Computer Methods in Applied Mechanics and Engineering, 2009, 198(5-8):860-876.
[79] LITVIN F L, GONZALEZ-PEREZ I, FUENTES A, et al. Design and investigation of gear drives with non-circular gears applied for speed variation and generation of functions[J]. Computer Methods in Applied Mechanics and Engineering, 2008, 197(45-48):3783-3802.
[80] 贾巨民, 高波. 越野汽车分动器非圆行星差速器概念模型[J]. 中国机械工程, 2008, 19(24):3003-3005. JIA Jumin, GAO Bo. A conceptive noncircular planetary differential for off-road vehicles[J]. China Mechanical Engineering, 2008, 19(24):3003-3005.
[81] HEBBALE K, LI D, ZHOU J, et al. Study of a non-circular gear infinitely variable transmission[C]//ASME 2014 Dynamic Systems and Control Conference, October 22-24, 2014, San Antonio, TX, USA. New York:ASME, 2014:DSCC2014-6083.
[82] 张兴中,李宪奎,郑学然,等. 椭圆齿轮驱动结晶器非正弦振动的研究[J]. 机械工程学报, 2004(11):178-182. ZHANG Xingzhong, LI Xiankui, ZHENG Xueran, et al. Study of non-sinusoidal oscillation of mold driven by ellipse gears[J]. Chinese Journal of Mechanical Engineering, 2004(11):178-182.