搅拌摩擦焊材料流动的试验表征研究现状

doi:10.3901/JME.2020.06.184

摘要/Abstract

摘要： 搅拌摩擦焊作为一种较新的固相连接技术，在航空航天、高速列车、汽车、船舶等机械制造领域中具有广阔的应用前景。充分认识搅拌摩擦焊接过程中的塑性材料流动，对于深刻理解焊缝成形机理、优化焊接工艺具有重要的理论指导意义。综述了当前搅拌摩擦焊塑性材料流动的试验表征技术研究现状，重点分析了采用“点”、“线”、“面”和“体”形标记材料来研究塑性材料流动的优缺点。在此基础上，综述了搅拌摩擦焊缝成形机理的研究现状，探讨了关于材料流动的尚未有效解决的关键科学问题。

关键词: 搅拌摩擦焊, 塑性材料流动, 标记材料, 焊缝成形

Abstract: Friction stir welding (FSW), as a relatively new solid-state welding technique, is a promising technique in the field of aerospace, high-speed train, automobile, shipbuilding and other machinery manufacturing. Fully understanding the plastic flow of the deformed materials in the process of friction stir welding is of importance in theory for deeply understanding the mechanism of the weld formation and optimizing the welding process. The state-of-art of the experimental characterization of the material flow in friction stir welding is summarized, and the advantages and disadvantages of using dots, lines, planes and solids as marker materials to study the material flow are emphatically analysed. Further, the research status of friction stir weld formation is reviewed, and the key scientific problems about the material flow which have not been solved effectively are discussed.

Key words: friction stir welding, material flow, marker materials, weld formation

中图分类号:

TG456

甄云乾, 刘小超, 申志康, 陈海燕. 搅拌摩擦焊材料流动的试验表征研究现状[J]. 机械工程学报, 2020, 56(6): 184-192.

ZHEN Yunqian, LIU Xiaochao, SHEN Zhikang, CHEN Haiyan. State-of-art of Experimental Characterization of Material Flow in Friction Stir Welding[J]. Journal of Mechanical Engineering, 2020, 56(6): 184-192.

参考文献

[1] THOMAS W M,NICHOLAS E D,NEEDHAM J C,et al. Friction stir butt welding:Great Britain,9125978.8[P]. 1991-12-08.
[2] MISHRA R S,MA Z Y. Friction stir welding and processing[J]. Materials Science and Engineering,2005,50(1):1-78.
[3] 万震宇,周霞,张昭. 6005-T6铝合金搅拌摩擦焊接微观组织演变计算及力学性能预测[J].机械工程学报,2018,54(8):129-136. WAN Zhenyu,ZHOU Xia,ZHANG Zhao. Calculations of microstructural changes and predictions of mechanical properties in friction stir welding of AA6005-T6[J]. Journal of Mechanical Engineering,2018,54(8):129-136.
[4] PADHY G K,WU C S,GAO S. Friction stir based welding and processing technologies-processes,parameters,microstructures and applications:A review[J]. Journal of Materials Science and Technology,2018,34(1):1-38.
[5] 于明润,赵洪运,蒋智华,等.铝/黄铜异种金属搅拌摩擦焊搭接接头显微组织与力学性能[J].机械工程学报,2019,55(6):39-45. YU Mingrun,ZHAO Hongyun,JIANG Zhihua,et al. Research on microstructure and mechanical properties of friction stir lap welded aluminum/brass dissimilar joint[J]. Journal of Mechanical Engineering,2019,55(6):39-45.
[6] 武传松,宿浩,石磊.搅拌摩擦焊接产热传热过程与材料流动的数值模拟[J].金属学报,2018,54(2):265-277. WU Chuansong,SU Hao,SHI Lei. Numerical simulation of heat generation,heat transfer and material flow in friction stir welding[J]. Acta Metallurgica Sinica,2018,54(2):265-277.
[7] 李文亚,余敏,李京龙,等.摩擦焊接头塑性金属流动行为研究现状[J].航空制造技术,2010(24):85-88. LI Wenya,YU Min,LI Jinglong,et al. Research status of plastic metal flowing behavior of friction welding joint[J]. Aeronautical Manufacturing Technology,2010(24):85-88.
[8] 毛育青,江周明,柯黎明,等.铝合金厚板搅拌摩擦焊焊缝金属流动行为研究进展[J].精密成形工程,2018,10(5):1-15. MAO Yuqing,JIANG Zhouming,KE Liming,et al. Material flow behavior of friction stir welding aluminum alloy thick plate joint[J]. Journal of Netshape Forming Engineering,2018,10(5):1-15.
[9] NANDAN R,DEBROY T,BHADESHIA H K D H. Recent advances in friction stir welding-Process,weldment structure and properties[J]. Progress in Materials Science,2008,53(6):980-1023.
[10] SHI L,WU C S. Transient model of heat transfer and material flow at different stages of friction stir welding process[J]. Journal of Manufacturing Processes,2017,25:323-339.
[11] 陈高强,史清宇.搅拌摩擦焊中材料流动行为数值模拟的研究进展[J].机械工程学报,2015,51(22):1-12. CHEN Gaoqiang,SHI Qingyu. Recent advances in numerical simulation of material flow behavior during frictions stir Welding[J]. Journal of Mechanical Engineering,2015,51(22):1-12.
[12] JI S D,SHI Q Y,ZHANG L G,et al. Numerical simulation of material flow behavior of friction stir welding influenced by rotational tool geometry[J]. Computational Materials Science,2012,63:218-226.
[13] ZHANG J,SHEN Y,LI B,et al. Numerical simulation and experimental investigation on friction stir welding of 6061-T6 aluminum alloy[J]. Materials and Design,2014,60(8):94-101.
[14] XU S,DENG X. A study of texture patterns in friction stir welds[J]. Acta Materialia,2008,56(6):1326-1341.
[15] SCHMIDT H,HATTEL J. A local model for the thermomechanical conditions in friction stir welding[J]. Modelling and Simulation in Materials Science and Engineering,2005,13(1):77-93.
[16] GUERDOUX S,FOURMENT L. A 3D numerical simulation of different phases of friction stir welding[J]. Modelling and Simulation in Materials Science and Engineering,2009,17(7):075001.
[17] TONGNE A,DESRAYAUD C,JAHAZI M,et al. On material flow in friction stir welded Al alloys[J]. Journal of Materials Processing Technology,2017,239:284-296.
[18] 张昭,张洪武.搅拌摩擦焊的数值模拟[D].北京:科学出版社,2016. ZHANG Zhao,ZHANG Hongwu. Numerical simulation of friction stir welding[D]. Beijing:Science Press,2016.
[19] COLLIGAN K. Material flow behavior during friction stir welding of aluminum[J]. Weld Journal,1999,78(7):229-237.
[20] MORISADA Y,FUJII H,KAWAHITO Y,et al. Three-dimensional visualization of material flow during friction stir welding by two pairs of X-ray transmission systems[J]. Scripta Materialia,2011,65(12):1085-1088.
[21] MORISADA Y,IMAIZUMI T,FUJII H. Determination of strain rate in friction stir welding by three-dimensional visualization of material flow using X-ray radiography[J]. Scripta Materialia,2015,106:57-60.
[22] KUMAR R,PANCHOLI V,BHARTI R P. Material flow visualization and determination of strain rate during friction stir welding[J]. Journal of Materials Processing Technology,2017,255:470-476.
[23] 王希靖,韩晓辉,李常锋,等.厚铝合金板搅拌摩擦焊塑性金属不同深度的水平流动状况[J].中国有色金属学报,2005,15(2):198-204. WANG Xijing,HAN Xiaohui,LI Changfeng,et al. Horizontal flow status of plastic metal in different depth during friction stir welding for thick aluminum alloy[J]. The Chinese Journal of Nonferrous Metals,2005(2):198-204.
[24] DONATH T,BECKMANN F,ZETTLER R,et al. Investigation of material flow in friction stir welding using computed microtomography[J]. AIP Conference Proceedings,2004,705(1):1312-1315.
[25] SCHNEIDER J A,NUNES A C. Thermo-mechanical processing in friction stir welds[C]//TMS Annual Meeting,March 2-6,2003,San Diego.2003:43-54.
[26] SCHNEIDER J,BESHEARS R,NUNES A C. Interfacial sticking and slipping in the friction stir welding process[J]. Materials Science and Engineering A (Structural Materials:Properties,Microstructure and Processing),2006,435-436:297-304.
[27] 黄奉安,邢丽,柯黎明,等.搅拌摩擦焊焊缝材料二维塑性流动研究[J].南昌航空工业学院学报,2003,17(3):17-19. HUANG Fengan,XING Li,KE Liming,et al. The studies of material two-dimensional plastic flow in friction stir welding[J]. Journal of Nanchang Institute of Aeronautical Technology,2003,17(3):17-19.
[28] 张武,柯黎明,邢丽.搅拌摩擦焊焊缝横截面塑性材料迁移行为分析[J].材料工程,2008(2):62-66. ZHANG Wu,KE Liming,XING Li. Investigation of the cross section transfer of plasticized materials in friction stir welding for aluminum alloy[J]. Journal of Materials Engineering,2008(2):62-66.
[29] SCHMIDT H N B,DICKERSON T L,HATTEL J H. Material flow in butt friction stir welds in AA2024-T3[J]. Acta Materialia,2006,54(4):1199-1209.
[30] SEIDEL T U,REYNOLDS A P. Visualization of the material flow in AA2195 friction stir welds using a marker insert technique[J]. Metallurgical and Materials Transactions A,2001,32(11):2879-2884.
[31] REYNOLDS A P. Visualisation of material flow in autogenous friction stir welds[J]. Science and Technology of Welding and Joining,2000,5(2):120-124.
[32] REYNOLDS A P. Flow visualization and simulation in FSW[J]. Scripta Materialia,2008,58(5):338-342.
[33] NAGIRA T,LIU X C,USHIODA K,et al. Role of annealing twinning in microstructural evolution of high purity silver during friction stir welding[J]. Science and Technology of Welding and Joining,2019,24(7):644-651.
[34] ZENG X H,XUE P,WANG D,et al. Material flow and void defect formation in friction stir welding of aluminium alloys[J]. Science and Technology of Welding and Joining,2018,23(8):677-686.
[35] ZHONG Y B,WU C S,PADHY G K. Effect of ultrasonic vibration on welding load,temperature and material flow in friction stir welding[J]. Journal of Materials Processing Technology,2017,239:273-283.
[36] LIU X C,SUN Y F,MORISADA Y,et al. Dynamics of rotational flow in friction stir welding of aluminium alloys[J]. Journal of Materials Processing Technology,2018,252:643-651.
[37] GAO S,WU C S,PADHY G K. Process and joint quality of ultrasonic vibration enhanced friction stir lap welding[J]. Science and Technology of Welding and Joining,2018,23(8):693-703.
[38] GUERRA M,SCHMIDT C,MCCLURE J C,et al. Flow patterns during friction stir welding[J]. Materials Characterization,2002,49(2):95-101.
[39] ESMAEILI A,BESHARATI GIVI M K,ZAREIE RAJANI H R. Experimental investigation of material flow welding defects in friction stir welding of aluminum to brass[J]. Materials and Manufacturing Processes,2012,27(12):1402-1408.
[40] LIU X C,WU C S. Material flow in ultrasonic vibration enhanced friction stir welding[J]. Journal of Materials Processing Technology,2015,225:32-44.
[41] CUI G R,MA Z Y,LI S X. Periodical plastic flow pattern in friction stir processed Al-Mg alloy[J]. Scripta Materialia,2008,58(12):1082-1085.
[42] LIU X C,WU C S. Elimination of tunnel defect in ultrasonic vibration enhanced friction stir welding[J]. Materials and Design,2016,90:350-358.
[43] HU Y,LIU H,FUJII H. Improving the mechanical properties of 2219-T6 aluminum alloy joints by ultrasonic vibrations during friction stir welding[J]. Journal of Materials Processing Technology,2019,271:75-84.
[44] LIU F C,NELSON T W. In-situ material flow pattern around probe during friction stir welding of austenitic stainless steel[J]. Materials and Design,2016,110:354-364.
[45] MORISADA Y,IMAIZUMI T,FUJII H. Clarification of material flow and defect formation during friction stir welding[J]. Science and Technology of Welding and Joining. 2015,20(2):130-137.
[46] LIU X,WU C,PADHY G K. Characterization of plastic deformation and material flow in ultrasonic vibration enhanced friction stir welding[J]. Scripta Materialia,2015,102:95-98.
[47] LIU X C,SUN Y F,NAGIRA T,et al. Experimental evaluation of strain and strain rate during rapid cooling friction stir welding of pure copper[J]. Science and Technology of Welding and Joining. 2019,24(4):352-359.