考虑螺纹柔性的螺栓连接临界松动载荷计算方法

doi:10.3901/JME.2020.15.238

机械工程学报 ›› 2020, Vol. 56 ›› Issue (15): 238-248.doi: 10.3901/JME.2020.15.238

• 数字化设计与制造 • 上一篇

扫码分享

考虑螺纹柔性的螺栓连接临界松动载荷计算方法

江文强, 墨泽, 安利强, 王璋奇, 杨文刚

华北电力大学机械工程系保定 071003

收稿日期:2019-10-30 修回日期:2020-04-11 出版日期:2020-08-05 发布日期:2020-10-19
通讯作者: 江文强(通信作者),男,1980年出生,副教授,硕士研究生导师。主要研究方向为电力设备强度与安全。E-mail:wenqiang.jiang@ncepu.edu.cn
基金资助:
中央高校基本科研业务费专项资金（2018MS119）、国家电网公司总部科技项目（SGHEBD00FCJS2000217）和国家自然科学基金（51608195）资助项目。

Computing Method of Bolted Joint Critical Loosening Load with Flexible Thread

JIANG Wenqiang, MO Ze, AN Liqiang, WANG Zhangqi, YANG Wengang

Department of Mechanical Engineering, North China Electric Power University, Baoding 071003

Received:2019-10-30 Revised:2020-04-11 Online:2020-08-05 Published:2020-10-19

摘要/Abstract

摘要： 螺栓连接松动是螺栓失效的一种重要形式。工程中，螺栓连接节点常常会受到交替变化的横向动态载荷作用，由于螺栓轴线与受力方向垂直，螺栓容易因预紧力降低而发生松动，从而改变螺栓连接节点乃至整个结构的固有力学特性。为研究横向载荷作用下螺栓连接的临界松动载荷，通过建立螺栓连接的力学模型对螺纹的受力情况进行分析，并在此基础上考虑螺纹柔性提出一种螺栓连接临界松动载荷的计算方法。设计并加工了螺栓连接横向振动试验装置，对螺栓连接的临界松动载荷进行了试验研究，通过对比理论计算结果和试验结果，验证了计算方法的准确性。基于提出的理论计算方法，给出了横向载荷作用下螺纹应力的分布规律，对比了刚性螺纹模型和柔性螺纹模型的应力分布特点，结果发现柔性螺纹模型可以很好地反映螺纹应力的整体变化情况。

关键词: 螺栓连接, 横向载荷, 柔性螺纹, 临界松动载荷, 计算方法

Abstract: Bolted joint loosening is one of the important modes of bolted joint failure. In the project, the bolted joints are often subjected to alternating lateral dynamic loads, and the bolts tend to loosening very easily as the bolt axis is perpendicular to the direction of the pretension forces. The reductions of the preload will change the inherent mechanical properties of the bolted joints and even cause the failure of entire structure. In order to study the critical loosening load of the bolted joint under the lateral load, the mechanical model of the bolted joint is established, and the forces of thread are analyzed. A new computing method of the bolted critical loosening load with flexible thread is derived. A set of experimental device for lateral vibration is designed and assembled, which is used to test the mechanical behavior of bolted joint under lateral vibration. The presented calculation method of bolted critical loosening load is verified by comparing the theoretical calculation and experimental results. The distribution law of thread stress under lateral load is given based on the new theoretical calculation method, and the stress distribution characteristics of rigid thread model and flexible thread model are compared. The results show that the thread stress given by flexible thread model can reflect the overall variation of thread stress.

Key words: bolted joint, transverse load, flexible thread, critical loosening load, computing method

中图分类号:

TG156

江文强, 墨泽, 安利强, 王璋奇, 杨文刚. 考虑螺纹柔性的螺栓连接临界松动载荷计算方法[J]. 机械工程学报, 2020, 56(15): 238-248.

JIANG Wenqiang, MO Ze, AN Liqiang, WANG Zhangqi, YANG Wengang. Computing Method of Bolted Joint Critical Loosening Load with Flexible Thread[J]. Journal of Mechanical Engineering, 2020, 56(15): 238-248.

参考文献

[1] JIANG Wenqiang,LIU Yaopeng,CHAN S L,et al. Direct analysis of an ultrahigh-voltage lattice transmission tower considering joint effects[J]. Journal of Structural Engineering,2017,143(5):04017009.
[2] JIANG Wenqiang,WANG Zhangqi,MCCLURE G,et al. Accurate modeling of joint effects in lattice trans-mission towers[J]. Engineering Structures,2011,33(5):1817-1827.
[3] HAIDAR N,OBEED S,JAWAD M. Mathematical representation of bolted-joint stiffness:A new suggested model[J]. Journal of Mechanical Science & Technology,2011,25(11):2827-2834.
[4] DINGER G,FRIEDRICH C. Avoiding self-loosening failure of bolted joints with numerical assessment of local contact state[J]. Engineering Failure Analysis,2011,18(8):2188-2200.
[5] PAI N G. Three-dimensional finite element analysis of threaded fastener loosening due to dynamics shear load[J]. Engineering Failure Analysis,2002,9(4):383-402.
[6] 李海江,田煜,孟永钢,等. 横向振动作用下螺纹联接松动过程的实验研究[J]. 清华大学学报,2016(2):171-175. LI Haijiang,TIAN Yu,MENG Yonggang,et al. Experimental study of the loosening of threaded fasteners with transverse vibration[J]. Journal of Tsinghua University,2016(2):171-175.
[7] IZUMI S,YOKOYAMA T,IWASAKI A,et al. Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastener[J]. Engineering Failure Analysis,2005,12(4):604-615.
[8] PAI N G,HESS D P. Experimental study of loosening of threaded fasteners due to dynamic shear loads[J]. Journal of Sound and Vibration,2002,253(3):585-602.
[9] ZHANG Ming,JIANG Yanyao,LEE C H. Finite element modeling of self-loosening of bolted joints[J]. Journal of Mechanical Design,2007,129(2):218-226.
[10] 张明远,鲁连涛,唐明明,等. 横向载荷作用下螺栓临界松动载荷数值计算方法研究[J]. 机械工程学报,2018(5):173-178. ZHANG Mingyuan,LU Liantao,TANG Mingming,et al. Research on numerical calculation method of critical load for bolt loosening under transverse loading[J]. Journal of Mechanical Engineering,2018(5):173-178.
[11] YAMATOTO A. The theory and computation of threads connection[M]. Tokyo:Yokendo,1980.
[12] 陈海平,曾攀,方刚,等. 螺纹副承载的分布规律[J].机械工程学报,2010,46(9):171-178. CHEN Haiping,ZENG Pan,FANG Gang,et al. Load distribution of bolted joint[J]. Journal of Mechanical Engineering,2010,46(9):171-178.
[13] NASSAR S A,HOUSARI B A. Study of the effect of hole clearance and thread fit on the self-loosening of threaded fasteners[J]. Journal of Mechanical Design,2007,129(6):1053-1062.
[14] ZHANG Dongmei,GAO Shiqiao,XU Xiao. A new computational method for threaded connection stiffness[J]. Advances in Mechanical Engineering,2016,8(12):168781401668265.
[15] 铁摩辛柯S P,古地尔J N. 弹性理论[M]. 3版. 北京:清华大学出版社,2004. TIMOSHENKO S P,GOODIER J N. Theory of elasticity[M]. 3rd ed. Beijing:Tsinghua University Press,2004.
[16] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 10431-2008紧固件横向振动试验方法[S]. 北京:中国标准出版社,2008. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China,China National Standardization Management Committee. GB/T 10431-2008 Transverse vibration testing method for fasteners[S]. Beijing:China Standard Press,2008.

考虑螺纹柔性的螺栓连接临界松动载荷计算方法

Computing Method of Bolted Joint Critical Loosening Load with Flexible Thread

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	罗忠, 石宝龙, 吴法勇, 李玉奇, 刘凯宁, 张小霞. 考虑装配工艺的螺栓连接转子系统振动特性研究[J]. 机械工程学报, 2024, 60(8): 396-406.
[2]	唐玉玲, 闫福棣, 张峻霞, 周振功, 郭颖, 姜美娇. 碳/碳编织复合材料连接结构的拉脱性能分析[J]. 机械工程学报, 2023, 59(18): 196-206.
[3]	曾鹏程, 池茂儒, 代亮成. 铁道车辆抗侧滚扭杆的抗侧滚刚度改进计算方法研究及验证[J]. 机械工程学报, 2023, 59(16): 353-360.
[4]	夏光, 许立平, 唐希雯, 陈无畏. 基于稳定域划分的平衡重式叉车防侧翻控制[J]. 机械工程学报, 2022, 58(6): 153-168.
[5]	李朝峰, 乔瑞环, 苗雪阳, 江雨霖. 螺栓连接界面非线性建模及其参数辨识方法研究[J]. 机械工程学报, 2021, 57(7): 78-86.
[6]	何玉辉, 胡航, 唐进元, 周炜. 齿根三维粗糙表面的应力集中系数计算研究[J]. 机械工程学报, 2021, 57(21): 182-188.
[7]	赵广, 金鑫, 崔颖, 冯志飞, 王亭月, 熊志亮. 基于模态应变能的接触刚度识别方法[J]. 机械工程学报, 2020, 56(9): 147-153.
[8]	唐玉玲, 陈浩, 周振功, 张琰, 郭颖. C/C编织复合材料双剪连接结构的挤压强度[J]. 机械工程学报, 2020, 56(18): 51-60.
[9]	李小强, 孟庆阔, 杜一凡, 陈飞宇, 王辉, 赵兵. 拧紧策略对航空发动机单螺栓连接预紧力的影响[J]. 机械工程学报, 2020, 56(13): 231-241.
[10]	宋敏. 有限元分析在接触网绝缘子电场分析中的应用[J]. 电气工程学报, 2019, 14(2): 108-114.
[11]	邓星桥, 冯志鹏, 李双岑, 王杰, 王进戈. 平面包络内啮合蜗杆传动关键参数对接触区域的影响分析[J]. 机械工程学报, 2018, 54(23): 47-55.
[12]	孔令飞, 孙理论, 刘瑶, 李旭波, 郭伟超. BTA深孔钻削过程切削热通量的追踪方法研究[J]. 机械工程学报, 2018, 54(15): 213-220.
[13]	杜永强, 刘建华, 刘学通, 蔡振兵, 彭金方, 朱旻昊. 偏心载荷作用下螺栓连接结构的松动行为研究[J]. 机械工程学报, 2018, 54(14): 74-81.
[14]	黄强,吴杰康,郑风雷,林奕鑫. 考虑检修计划的减供负荷功率概率计算方法[J]. 电气工程学报, 2016, 11(5): 30-39.
[15]	朱林波;刘志刚;蒋翔俊;杨国庆;洪军. 考虑界面端应力奇异性的螺栓连接支承面接触压力计算模型[J]. , 2014, 50(23): 89-96.