基于Galfenol合金的高灵敏度冲击力传感器

doi:10.3901/JME.2019.08.014

机械工程学报 ›› 2019, Vol. 55 ›› Issue (8): 14-23.doi: 10.3901/JME.2019.08.014

扫码分享

基于Galfenol合金的高灵敏度冲击力传感器

李波¹, 杨家斌¹, 舒亮², 朱彦超¹, 陈定方¹

1. 武汉理工大学智能制造与控制研究所武汉 430063;
2. 温州大学浙江省低压电器智能技术重点实验室温州 325035

收稿日期:2018-08-09 修回日期:2019-01-21 出版日期:2019-04-20 发布日期:2019-04-20
通讯作者: 舒亮(通信作者),男,1982年出生,副教授。主要研究方向为智能材料、结构的建模方法及控制理论。E-mail:shuliangalbert@163.com
作者简介:李波,男,1963年出生,副教授。主要研究方向为机械设计与制造。E-mail:whlibo163@163.com;杨家斌,男,1993年出生。主要研究方向为智能材料与器件。E-mail:yangjiabin_whut@163.com;朱彦超,男,1995年出生。主要研究方向为智能材料与器件。E-mail:349260872@qq.com;陈定方,男,1946年出生,教授,博士研究生导师。主要研究方向为智能制造与控制。E-mail:cadcs@126.com
基金资助:
国家自然科学基金（51205293）、浙江省自然科学基金（LY15E050011）、中国博士后科学基金（2015M571904）和武汉理工大学研究生优秀学位论文培育（2016-YS-078）资助项目。

High Sensitivity Impact Force Sensor Based on Galfenol Alloy

LI Bo¹, YANG Jiabin¹, SHU Liang², ZHU Yanchao¹, CHEN Dingfang¹

1. School of Logistics Engineering, Wuhan University of Technology, Wuhan 430063;
2. The Key Laboratory of Low-Voltage Apparatus Intellectual Technology of Zhejiang, Wenzhou University, Wenzhou 325035

Received:2018-08-09 Revised:2019-01-21 Online:2019-04-20 Published:2019-04-20

摘要/Abstract

摘要： 目前基于压电材料等的冲击力传感器由于其材料本身的脆性限制了其应用范围，Galfenol合金具有中等磁致伸缩以及较高机械强度，更适用于对冲击载荷的检测。提出以Galfenol合金（铁-镓合金）为敏感元件的磁致伸缩冲击力传感器，提出三种不同结构的敏感元件（棒、等截面矩形梁与变截面工字梁），通过建立动力学模型对比其整体的传感性能，并采用正交设计的方法对变截面工字梁的尺寸进行优化设计。动力学模型的对比表明，基于变截面工字梁的传感器灵敏度最高。对基于变截面工字梁的传感器进行试验研究，并采用麦夸特法对传感器进行标定，试验结果表明该传感器可实现对冲击力准确测量，平均误差不超过5.73%。该传感器可实现对瞬态冲击的检测，拓宽了Galfenol合金的动态检测领域。冲击载荷可直接作用在传感器的Galfenol合金梁上，不需要额外的保护措施，结构更简单。通过结构优化对传感器的灵敏度作了进一步的提升。

关键词: Galfenol合金, 冲击力传感, 磁致伸缩, 麦夸特法, 正交设计

Abstract: The present impact force sensor based on piezoelectric materials is limited in application range due to the material brittleness. Galfenol alloy is a steel like material with moderate magnetostrictive and high mechanical strength properties, which is more applicable for impact detection. A Galfenol alloy based impact force sensor is presented. Three different configurations of sensitive elements including uniform rod, rectangular beam, and un-uniform I beam, are designed. The continuous kinetic models are developed to compare the total sensing performance, and the optimal size of the un-uniform I beam is obtained by employing the orthogonal design method. The kinetic models indicate that the un-uniform I beam based sensor demonstrates optimal sensitivity compared with the other two designs. The un-uniform I beam is constructed experimentally and the senor is calibrated via a Levenberg-Marquardt fitting method. Experimental results show that the impact force can be detected accurately with a limited measurement error within 5.73%. The proposed sensor can be used to detect instantaneous impact, which broadening the application of Galfenol alloy in dynamic force detection. The impact can be applied directly on the sensitive element with no extra protection, leading to a compact structure. The sensitivity of the sensor is further improved by structural optimization.

Key words: Galfenol alloy, impact force sensing, Levenberg-Marquardt method, magnetostrictive, orthogonal design

中图分类号:

TB34

李波, 杨家斌, 舒亮, 朱彦超, 陈定方. 基于Galfenol合金的高灵敏度冲击力传感器[J]. 机械工程学报, 2019, 55(8): 14-23.

LI Bo, YANG Jiabin, SHU Liang, ZHU Yanchao, CHEN Dingfang. High Sensitivity Impact Force Sensor Based on Galfenol Alloy[J]. Journal of Mechanical Engineering, 2019, 55(8): 14-23.

参考文献

[1] 王俊峰. 碰撞冲击力的数值计算与测试方法研究[D]. 上海:上海交通大学,2007. WANG Junfeng. Study on numerical simulation and testing method of impact force[D]. Shanghai:Shanghai Jiao Tong University,2007.
[2] 王斌. 薄壁筒体结构跌落冲击响应研究[D]. 北京:北京理工大学,2015. WANG Bin. Metal thin walled tube structure drop experiment and simulation[D]. Beijing:Beijing Institute of Technology,2015.
[3] VIOTTI M R,Jr AIBERTAZZI A G,KAPP W. Experimental comparison between a portable DSPI device with diffractive optical element and a hole drilling strain gage combined system[J]. Optics & Lasers in Engineering,2008,46(11):835-841.
[4] 田文杰,程红亚,宁永怀,等. 单基多电极石英晶体谐振器的力-频特性[J]. 压电与声光,2007,29(6):641-643. TIAN Wenjie,CHENG Hongya,NING Yonghuai,et al. Force-frequency characteristic of mono-base multi- electrode quartz crystal resonator[J]. Piezoelectrics and Acoustooptics,2007,29(6):641-643.
[5] 冯冠平,王晓红,王劲松. 石英晶体谐振器的力-频效应及其应用[J]. 清华大学学报,1998,38(8):35-38. FENG Guanping,WANG Xiaohong,WANG Jinsong. Force-frequency effect of quartz crystal resonator and its application[J]. Journal of Tsinghua University,1998,38(8):35-38.
[6] FRITZ J,WÜNNEMANN K,REIMOLD W U,et al. Shock experiments on quartz targets pre-cooled to 77 K[J]. International Journal of Impact Engineering,2011,38(6):440-445.
[7] 王中立,李丽宏. 基于石英传感器的动态称重数据处理算法研究[J]. 传感技术学报,2017,30(2):236-241. WANG Zhongli,LI Lihong. Research on dynamic weighing data processing algorithm based on quartz sensor[J]. Journal of Sensor Technology,2017,30(2):236-241.
[8] TONGE A L,KIMBERLEY J,RAMESH K T. The mechanism of compressive unloading failure in single crystal quartz and other brittle solids[J]. International Journal of Solids & Structures,2012,49(26):3923-3934.
[9] 郑永军,马超,张艳超,等. 基于PVDF压电传感器的水滴冲击力检测系统[J]. 农业机械学报,2014(s1):142-147. ZHENG Yongjun,MA Chao,ZHANG Yanchao,et al. Water drop impact force detection system based on PVDF piezoelectric sensor[J]. Journal of Agricultural Machinery,2014(s1):142-147.
[10] HWANG S K,HWANG H Y. Study on signal characteristic analysis of multi-axis load measurement sensors[J]. Smart Material and Structures,2016,25(11):115004.
[11] KOTIAN K,HEADINGS L M,DAPINO M J. Stress averaging in PVDF sensors for in-plane sinusoidal and impact-induced stresses[J]. IEEE Sensors Journal,2013,13(11):4444-4451.
[12] ROH Y,VARADAN V V,VARADAN V K. Characterization of all the elastic,dielectric,and piezoelectric constants of uniaxially oriented poled PVDF films[J]. IEEE Trans. Ultrason Ferroelectr. Freq. Control,2002,49(6):836-847.
[13] XIONG L,JIANG G,GUO Y,et al. A Three-dimensional fiber bragg grating force sensor for robot[J]. IEEE Sensors Journal,2018,18(9):3632-3639.
[14] 许会超,苗新刚,汪苏,等. 一种机器人多维光纤光栅力传感器[J]. 上海交通大学学报,2016,50(12):1881-1884. XU Huichao,MIAO Xingang,WANG Su,et al. A robot multi-dimensional FBG force sensor[J]. Journal of Shanghai Jiao Tong University,2016,50(12):1881-1884.
[15] OMAN K,HOE B V,ALY K,et al. Instrumentation of integrally stiffened composite panel with fiber Bragg grating sensors for vibration measurements[J]. Smart Materials & Structures,2015,24(8):085031.
[16] 张智禹,于文革. 一种新型FBG微力传感器[J]. 传感器与微系统,2014,33(3):70-71. ZHANG Zhiyu,YU Wenge. A novel FBG micro-force sensor[J]. Transducer and Microsystem Technologies,2014,33(3):70-71.
[17] 蔡万宠,张建富,郁鼎文,等. 超磁致伸缩超声振动系统的机电转换效率研究[J]. 机械工程学报,2017,53(19):66-72. CAI Wanchong,ZHANG Jianfu,YU Dingwen,et al. Research on the electromechanical conversion efficiency for giant magnetostrictive ultrasonic matching system[J]. Journal of Mechanical Engineering,2017,53(19):66-72.
[18] 郑家驹,王洪礼,曹淑英. 基于逆磁致伸缩效应的超磁致伸缩磁力控制器件建模[J].机械工程学报,2008,44(5):51-56. ZHENG Jiaju,WANG Hongli,CAO Shuying. Modeling of a giant magnetostrictive device for magnetic force control based on inverse magnetostrictive effect[J]. Chinese Journal of Mechanical Engineering,2008,44(5):51-56.
[19] ZHOU H M,LI M H,LI X H,et al. An analytical and explicit multi-field coupled nonlinear constitutive model for Terfenol-D giant magnetostrictive material[J]. Smart Materials & Structures,2016,25(8):085036.
[20] 朱翔鸥,舒亮,吴桂初,等. 基于各向异性的Galfenol复合悬臂梁三维非线性耦合模型[J]. 机械工程学报,2012,48(9):95-102. ZHU Xiangou,SHU Liang,WU Guichu,et al. Three-dimensional nonlinear coupled model of Galfenol-driven composite cantilever beam based on anisotropy[J]. Journal of Mechanical Engineering,2012,48(9):95-102.
[21] CLARK A E,RESTORFF J B,WUN-FOGLE M,et al. Magnetostrictive properties of body-centered cubic Fe-Ga and Fe-Ga-Al alloys[J]. IEEE Transactions on Magnetics,2000,36(5):3238-3240.
[22] DENG Z,DAPINO M J. Magnetic flux biasing of magnetostrictive sensors[J]. Smart Material & Structures,2017,26(5):055027.
[23] DAPINO M J,DENG Z,CALKINS F T,et al. Wiley encyclopedia of electrical and electronics engineering:magnetostrictive devices[M]. New York:John Wiley & Sons,Inc,2016.
[24] LI B,LI P H,SHU L,et al. Parametric design and experimental research for an iron-gallium alloy force sensor[J]. Sensors & Materials,2016,28(3):261-270.
[25] ADOLPHI B,MCCORD J,BERTRAM M,et al. Improvement of sputtered Galfenol thin films for sensor applications[J]. Smart Materials & Structures,2010,19(5):055013.
[26] EVANS P G,DAPINO M J. Stress-dependent susceptibility of Galfenol and application to force sensing[J]. Journal of Applied Physics,2010,108(7):074517.
[27] 武兰河. 结构动力学[M]. 北京:人民交通出版社,2016. WU Lanhe. Structural dynamics[M]. Beijing:China Communications Press,2016.
[28] UENO T,YAMADA S. Performance of energy harvester using iron-gallium alloy in free vibration[J]. IEEE Transactions on Magnetics,2011,47(10):2407-2409.
[29] KITA S,UENO T,YAMADA S. Improvement of force factor of magnetostrictive vibration power generator for high efficiency[J]. Journal of Applied Physics,2015,117(17):3238-3240.
[30] 陈波,高殿荣,杨超,等. 大功率远程射雾器结构参数多目标智能协同优化[J]. 机械工程学报,2017,53(6):166-175. CHEN Bo,GAO Dianrong,YANG Chao,et al. Multi-objective intelligent collaborative optimization of tructure parameters for high-power remote sprayer[J]. Journal of Mechanical Engineering,2017,53(6):166-175.
[31] DUAN P,WANG Y,YANG Y,et al. Optimization of adiponitrile hydrolysis in subcritical water using an orthogonal array design[J]. Journal of Solution Chemistry,2009,38(2):241-258.
[32] WENG L,WALKER T,DENG Z,et al. Major and minor stress-magnetization loops in textured polycrystalline Fe81.6Ga18.4 Galfenol[J]. Journal of Applied Physics,2013,113(2):043001-595.
[33] 严正,范翔,赵文恺,等. 自适应Levenberg-Marquardt方法提高潮流计算收敛性[J]. 中国电机工程学报,2015,35(8):1909-1918. YAN Zheng,FAN Xiang,ZHAO Wenkai,et al. Improving the convergence of power flow calculation by a self-adaptive Levenberg-marquardt method[J]. Proceedings of the CSEE,2015,35(8):1909-1918.

基于Galfenol合金的高灵敏度冲击力传感器

High Sensitivity Impact Force Sensor Based on Galfenol Alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	闫洪波, 付鑫, 汪建新, 于均成. 基于分数阶阻尼的超磁致伸缩致动器非线性动力学研究[J]. 机械工程学报, 2022, 58(23): 151-163.
[2]	兰天, 冯平法, 张建富, 周辉林. 超磁致伸缩换能器涡流损耗及温升抑制研究[J]. 机械工程学报, 2022, 58(21): 243-249.
[3]	王青, 李怡, 林焱, 徐秋元, 连雯. 电力变压器铁心振动特性分析^*[J]. 电气工程学报, 2022, 17(1): 114-121.
[4]	闫洪波, 高鸿, 郝宏波. 超磁致伸缩驱动器磁滞非线性动力学研究[J]. 机械工程学报, 2020, 56(15): 207-217.
[5]	李波, 朱彦超, 舒亮, 杨家斌, 陈定方. 考虑流体体积模量变化的M-EHA非线性动力学模型[J]. 机械工程学报, 2020, 56(10): 225-234.
[6]	喻曹丰, 王传礼, 解甜, 杨林建, 姜志. 基于GMM的高性能微定位工作台驱动系统的研制[J]. 机械工程学报, 2019, 55(9): 136-143.
[7]	朱林剑, 曹向峥, 陆玉前. 超磁致伸缩谐波电机致动器设计方法与特性研究[J]. 机械工程学报, 2018, 54(22): 204-211.
[8]	刘增华, 钟栩文, 李欣, 何存富, 吴斌. 基于全向性SH₀模态磁致伸缩贴片型传感器阵列的铝板缺陷成像研究[J]. 机械工程学报, 2018, 54(14): 8-15.
[9]	王悦民, 邓文力, 耿海泉, 陈乐, 叶伟. 超声导波激励频率选取对其模式控制的影响[J]. 机械工程学报, 2017, 53(24): 104-109.
[10]	蔡万宠, 张建富, 郁鼎文, 吴志军, 冯平法. 超磁致伸缩超声振动系统的机电转换效率研究[J]. 机械工程学报, 2017, 53(19): 52-58.
[11]	何健鹏, 徐科, 任威平. 线圈自激励电磁超声换能器设计及特性研究[J]. 机械工程学报, 2017, 53(16): 134-140.
[12]	薛光明, 张培林, 何忠波, 李冬伟, 杨朝舒, 赵正龙. 喷油器用超磁致伸缩致动器多自由度模型[J]. 机械工程学报, 2015, 51(24): 97-104.
[13]	刘增华, 樊军伟, 何存富, 吴斌. 基于全向型S0模态磁致伸缩传感器的无参考缺陷成像方法研究[J]. 机械工程学报, 2015, 51(10): 8-16.
[14]	曾杰伟;苏兰海;徐立坪;张晓峰;张清东. 逆磁致伸缩效应钢板内应力检测技术研究[J]. , 2014, 50(8): 17-22.
[15]	吴斌;徐秀;高博;刘秀成;何存富. 液体黏滞系数测量新方法[J]. , 2014, 50(6): 8-14.