窄细槽分段速进给电解加工方法研究

doi:10.3901/JME.2018.23.209

机械工程学报 ›› 2018, Vol. 54 ›› Issue (23): 209-214.doi: 10.3901/JME.2018.23.209

扫码分享

窄细槽分段速进给电解加工方法研究

任锟, 张彧萌, 蒋丹燕, 潘骏, 陈文华, 胡旭晓

浙江理工大学机电产品可靠性分析与测试国家地方联合工程研究中心杭州 310018

收稿日期:2017-12-26 修回日期:2018-04-28 出版日期:2018-12-05 发布日期:2018-12-05
通讯作者: 潘骏(通信作者),男,1974年出生,博士,教授。主要研究方向为机电系统可靠性。E-mail:panjun@zstu.edu.cn
作者简介:任锟,男,1979年出生,博士,副教授。主要研究方向为数控装备研发和系统可靠性。E-mail:renkun_2008@sina.com
基金资助:
国家自然科学基金（51405445）、浙江省自然科学基金（LZ14E050003）和国家重点研发计划（2017YFB0309800）资助项目。

Pulse Electrochemical Narrow Slot Machining Based on Segmented Feeding Control Method

REN Kun, ZHANG Yumeng, JIANG Danyan, PAN Jun, CHEN Wenhua, HU Xuxiao

National and Local Joint Engineering Research Center of Reliability Analysis and Testing for Mechanical and Electrical Products, Zhejiang Sci-Tech University, Hangzhou 310018

Received:2017-12-26 Revised:2018-04-28 Online:2018-12-05 Published:2018-12-05

摘要/Abstract

摘要： 针对小间隙电解加工过程中极间间隙不稳定导致加工效率低下甚至发生短路等问题，以窄细槽电解加工过程为研究对象，提出自适应于工件蚀除速度的电极进给分段速加工方法。建立极间电流与加工深度之间的理论关系模型，采用单因素实验法对理论模型进行修正，使其反映实际加工过程。依据电解过程中深度与电流的变化规律，建立电极进给速度实时修正方程，实现电解过程不同进给速度段的划分。采用速度线性矢量混合算法，构建速度控制方程，实现各段速间的平稳过渡，保证电极进给速度变化时极间电流的稳定。实验结果表明，分段速进给控制方法能有效避免小间隙电解过程中由于进给速度与工件蚀除速度不匹配而导致的短路现象，有效保证窄细槽电解加工效率与轮廓精度。

关键词: 分段速进给控制, 极间间隙, 脉冲电解加工, 速度混合

Abstract: To deal with low machining efficiency and short-circuits caused by the instability of the inter-electrode gap size in pulse electrochemical narrow slot machining, a segmented cathode feeding control method to be self-adaptive with the dissolution rate of work piece is proposed in this paper. A theoretical model between inter-electrode current and feeding depth is constructed and adjusted by experimental data to be accordant to real machining process. According to the relationship between current and feeding depth, a correction equation for feeding velocity is formulated, and cathode feeding process is divided into multiple stages with different feedrates. To make velocity smooth link between two neighbor stages and avoid inter-electrode current surge, a velocity blending algorithm is proposed and velocity control equation is constructed. Experimental results show that the segmented feeding control algorithm can avoid short-circuits, improve machining efficiency and achieve contour accuracy of industrial application in small gap pulse electrochemical machining.

Key words: inter-electrode gap, pulse electrochemical machining, segmented feeding control, velocity blending

中图分类号:

TG662

任锟, 张彧萌, 蒋丹燕, 潘骏, 陈文华, 胡旭晓. 窄细槽分段速进给电解加工方法研究[J]. 机械工程学报, 2018, 54(23): 209-214.

REN Kun, ZHANG Yumeng, JIANG Danyan, PAN Jun, CHEN Wenhua, HU Xuxiao. Pulse Electrochemical Narrow Slot Machining Based on Segmented Feeding Control Method[J]. Journal of Mechanical Engineering, 2018, 54(23): 209-214.

参考文献

[1] 王之明. 关于电解加工间隙的阐述[J]. 电加工与模具, 1973(5):13-30. WANG Zhiming. Elaboration on gap of electrochemical machining[J]. Electromachining & Mould,1973(5):13-30.
[2] 王希,赵东标,云乃彰. 一种电解加工间隙的智能测控方法研究[J]. 中国机械工程,2007,18(23):2860-2864. WANG Xi,ZHAO Dongbiao,YUN Naizhang. Research on intelligent measurement and control method of interelectrode gap of electrochemical machining(ECM)[J]. Journal of Mechanical Engineering, 2007, 18(23):2860-2864.
[3] 王希,赵东标,云乃彰. 基于小波变换、模糊控制的电解加工间隙检测与控制[J]. 中国机械工程,2006,17(11):1170-1173. WANG Xi,ZHAO Dongbiao,YUN Naizhang. Measurement and control of interelectrode gap during electrochemical machining(ECM) based on wavelet transform and fuzzy control[J]. China Mechanical Engineering,2006,17(11):1170-1173.
[4] 陆永华, 赵东标, 云乃彰, 等. 基于六维力电解加工间隙在线检测试验研究[J]. 机械工程学报, 2006, 42(7):126-131. LU Yonghua,ZHAO Dongbiao,YUN Naizhang,et al. Experimental research of on-line monitoring gap of electrochemical machining based on 6D forces[J]. Journal of Mechanical Engineering, 2006, 42(7):126-131.
[5] 王贤成,狄士春,迟关心,等. 间隙平均电流检测在高频窄脉冲电解加工中的应用[J]. 航空精密制造技术, 2006,42(2):36-38. WANG Xiancheng,DI Shichun,CHI Guanxin,et al. Gap average current measuring applied in HSPECM[J]. Aviation Precision Manufacturing Technology,2006, 42(2):36-38.
[6] RAJURKAR K P,WEI B,KOZAK J,et al. Modelling and monitoring interelectrode gap in pulse electrochemical machining[J]. CIRP Annals-Manufacturing Technology,1995,44(1):177-180.
[7] RAJURKAR K P,SCHNACKER C L,LINDSAY R P. Some aspects of ECM performance and control[J]. CIRP Annals-Manufacturing Technology,1988,37(1):183-186.
[8] LI Yong,ZHENG Yunfei,YANG Guang,et al. Localized electrochemical micromachining with gap control[J]. Sensors and Actuators A:Physcal,2003,108(1-3):144-148.
[9] WEI B,RAJURKAR K P,TALPALLIKAR S. Identification of interelectrode gap sizes in pulse electrochemical machining[J]. Journal of the Electrochemical Society,1997,144(11):3913-3919.
[10] BRUSILOVSKI Z. Adjustment and readjustment of electrochemical machines and control of the process parameters in machining shaped surfaces[J]. Journal of Materials Processing Technology,2008,196(1-3):311-320.
[11] de SILVA A K M,ALTENA H S J,MCGEOUGH J A. Precision ECM by process characteristic modelling[J]. CIRP Annals-Manufacturing Technology,2000,49(1):151-156.
[12] KOYANO T,KUNIEDA M. Micro electrochemical machining using electrostatic induction feeding method[J]. CIRP Annals-Manufacturing Technology, 2013,62(1):175-178.
[13] NEAL R E. ECM in-process data collection and control[J]. Precision Engineering, 1980,2(3):133-138.
[14] 赵建社,王峰,肖雄,等. 微尺度弧形群缝电解加工试验研究[J]. 机械工程学报,2014,50(23):186-193. ZHAO Jianshe,WANG Feng,XIAO Xiong,et al. Experiment research on electrochemical machining of meso mcale arc-shaped multi-grooves[J]. Journal of Mechanical Engineering,2014,50(23):186-193.

窄细槽分段速进给电解加工方法研究

Pulse Electrochemical Narrow Slot Machining Based on Segmented Feeding Control Method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	赵传军, 王冀鹏, 许立忠. 基于等效物理模型的脉冲电解微加工精度及定域性表征研究[J]. 机械工程学报, 2024, 60(5): 378-389.
[2]	张朝阳;朱荻;王明环. 纳秒脉冲微细电化学加工的理论及试验[J]. , 2007, 43(1): 208-213.