[1] 铁路"十三五"发展规划. 国家发展改革委、交通运输部、国家铁路局、中国铁路总公司,2017年11月20日. National Development and Reform Commission,Ministry of Transport,State Railway Administration,China Railways Corporation,The 13th five-year plan for railways[R]. 2017-11-20.
[2] CANNON D F,EDEL K O,GRASSIE S L,et al. Rail defects:An overview[J]. Fatigue & Fracture of Engineering Materials & Structures,2010,26(10):865-886.
[3] GRASSIE S L. Rail corrugation:Characteristics,cause,and trements[J]. Proceedings of the Institution of Mechanical Engineers Part F:Journal of Rail & Rapid Transit,2009,223:1-16.
[4] 金学松,杜星,郭俊,等. 钢轨打磨技术研究进展[J]. 西南交通大学学报,2010,45(1):1-11. JIN Xuesong,DU Xing,GUO Jun,et al. State of arts of research on rail grinding[J]. Journal of Southwest Jiaotong University,2010,45(1):1-11.
[5] ZAREMBSKI M,PATEL P. Estimating maintenance costs for mixed higher speed passenger and freight rail corridors[C/CD]//Proceedings of the 2010 Joint Rail Conference,Urbana,Illinois,USA,Rail Transportation Division,2010.
[6] SCHOECH W,HEYDER R,GROHMANN D. Contact geometry and surface maintenance[C/CD]//7th International Conference on Contact Mechanics and Wear of Rail/Wheel System,Brisbane,Australia,2006.
[7] 智少丹. 钢轨打磨车磨削过程建模研究[D]. 北京:北京交通大学,2015. ZHI Shaodan. Modelling research on the grinding process of rail grinding vehicle[D]. Beijing:Beijing Jiaotong University,2015.
[8] ERIC E M,JOSEPH K. The application of contact mechanics to rail profile design and rail grinding[J]. Wear,2002,253(1):308-316.
[9] ZHI S D,ZAREMBSKI A M,LI J Y. Towards a better understanding of the rail grinding mechanism[C/CD]//Proceedings of the ASME Rail Transportation Division Fall Technical Conference,Altoona,Pennsylvania,USA,2013.
[10] 周清跃,田常海,张银花,等. 高速铁路钢轨打磨关键技术研究[J]. 中国铁道科学,2012,33(2):66-70. ZHOU Qingyue,TIAN Changhai,ZHANG Yinhua,et al. Research on key rail grinding technology of high-speed railway[J]. China Railway Science,2012,33(2):66-70.
[11] 刘月明,李建勇,蔡永林,等. 钢轨打磨技术现状和发展趋势[J]. 中国铁道科学,2014,35(4):29-37. LIU Yueming,LI Jianyong,CAI Yonglin,et al. Current state and development trend of rail grinding technology[J]. China Railway Science,2014,35(4):29-37.
[12] 周清跃,刘丰收,俞喆,等. 我国铁路钢轨型面优化研究[J]. 中国铁路,2017,12:7-12. ZHOU Qingyue,LIU Fengshou,YU Zhe,et al. Study on the optimization of rail profile in china[J]. China Railway,2017,12:7-12.
[13] 周清跃,张银花,田常海,等. 60N钢轨的廓型设计及试验研究[J]. 中国铁道科学,2014,35(2):128-135. ZHOU Qingyue,ZHANG Yinhua,TIAN Changhai,et al. Profile design and test study of 60N rail[J]. China Railway Science,2014,35(2):128-135.
[14] ZAREMBSKI A M,PALESE J W. Does rail grinding reduce rail defects[J]. Railway Track & Structures,2011,107(2):32-35.
[15] 肖杰灵. 客货混跑铁路钢轨非对称打磨的理论与试验研究[D]. 成都:西南交通大学,2005. XIAO Jieling. The theory and test research on rail asymmetric grinding for the passenger and freight railway[D]. Chengdu:Southwest Jiaotong University,2005.
[16] ZAREMBSKI A M. The art and science of rail grinding[M]. Simmons-Boardman Books,Inc.,Omaha,Neb.,2005.
[17] ZAREMBSKI A M. Grinding as part of rail management strategy[J]. Railway Track & Structures,2008,104(6):55-58.
[18] ZAREMBSKI A M. High-speed rail grinding and metal removal[J]. Railway Track & Structures,2012,108(6):44-46.
[19] YUKIO S,KENGO I. Effect of rail grinding on rolling contact fatigue in railway rail used in conventional line in Japan[J]. Wear,2008,265(9):1342-1348.
[20] 聂蒙. 基于变参数气动结构的钢轨打磨恒功率控制技术研究[D]. 北京:北京交通大学,2015. NIE Meng. Research on constant-power control technology for rail grinding based on variable parameter pneumatic structure[J]. Beijing:Beijing Jiaotong University,2015.
[21] ZHI S D,LI J Y,ZAREMBSKI A M. Predictive modeling of the rail grinding process using a distributed cutting grain approach[J]. Proceedings of the Institution of Mechanical Engineers Part F:Journal of Rail & Rapid Transit,2016,230(6):1540-1560.
[22] ZHI S D,LI J Y,ZAREMBSKI A M. Grinding motor energy saving method based on material removal model in rail grinding processes[J]. International Journal of Precision Engineering and Manufacturing-Green Technology,2015,2(1):21-30.
[23] REAL J I,ZAMORANO C,VELARTE J L,et al. Development of a vehicle-track interaction model to predict the vibratory benefits of rail grinding in the time oomain[J]. Journal of Modern Transportation,2015,23(3):189-201.
[24] HARTSOUGH C M,PALESE J W,SCHMITZER G,et al. Optimized rail grinding through dynamic positioning and powering of grinding motors[C/CD]//Proceedings of the ASME Joint Rail Conference,Columbia,SC,USA,2016.
[25] ZHANG Z Y,SHANG W,DING H H,et al. Thermal model and temperature field in rail grinding process based on a moving heat source[J]. Applied Thermal Engineering,2016,106:855-864.
[26] GU K K,LIN Q,WANG W J,et al. Analysis on the effects of rotational speed of grinding stone on removal behavior of rail material[J]. Wear,2015,342-343(3):52-59.
[27] STEENBERGEN M. Rolling contact fatigue in relation to rail grinding[J]. Wear,2016,356-357:110-121.
[28] SANTA J F,TORO A,LEWIS R. Correlations between rail wear rates and operating conditions in a commercial railroad[J]. Tribology International,2016,95:5-12.
[29] RASMUSSEN C J,FAESTER S,DHAR S,et al. Surface crack formation on rails at grinding induced martensite white etching layers[J]. Wear,2017,384-385(9):8-14.
[30] SINGLETON R,MARSHALL M B,LEWIS R,et al. Rail grinding for the 21St Century-Taking a lead from the aerospace industry[J]. Proceedings of the Institution of Mechanical Engineers Part F:Journal of Rail & Rapid Transit,2015,229(5):457-465.
[31] UHLMANN E,LYPOVKA P,HOCHSCHILD L,et al. Influence of rail grinding process parameters on rail surface roughness and surface layer hardness[J]. Wear,2016,366-367:287-293.
[32] 余念东,张蒙. SF03-FFS型钢轨铣磨车的应用[J]. 铁路技术创新,2013(1):37-38. YU Niandong,ZHANG Meng. The application of SF03-FFS rail milling train[J]. Railway Technology Innovation,2013(1):37-38.
[33] 刘真兵. 钢轨铣磨车磨削装置设计及磨削力控制研究[D]. 长沙:中南大学,2013. LIU Zhenbing. The design of rail milling train grinding equipment and the research of the grinding force control[D]. Changsha:Central South University,2013.
[34] 胡军科,蒋亚军,方健康,等. 钢轨铣磨车磨削力的广义预测控制[J]. 中国铁道科学,2014,35(6):84-90. HU Junke,JIANG Yajun,FANG Jiankang,et al. Generalized predictive control of the grinding force of rail milling train[J]. China Railway Science,2014,35(6):84-90.
[35] 刘江南,杨小娟,张文博,等. 融合功能倒推与裁剪法的系统创新设计方法[J]. 机械工程学报,2016,52(23):69-76. LIU Jiangnan,YANG Xiaojuan,ZHANG Wenbo,et al. Systematic innovative design by integrating function backtracking with trimming[J]. Journal of Mechanical Engineering,2016,52(23):69-76.
[36] 占国栋. 钢轨铣磨车铣刀盘设计与优化研究[D]. 长沙:湖南大学,2016. ZHAN Guodong. Design and optimization research of the milling cutter for rail milling train[D]. Changsha:Hunan University,2016.
[37] 潘超. 钢轨铣磨车非对称成型铣削方法研究[J]. 铁道科学与工程学报,2017,14(7):1526-1530. PAN Chao. Method of asymmetric profile forming milling for rail milling train[J]. Journal of Railway Science and Engineering,2017,14(7):1526-1530.
[38] 史智勇. 某型钢轨铣磨车动力学性能及振动传递特性研究[D]. 成都:西南交通大学,2017. SHI Zhiyong. Analysis on dynamics performance and vibration transmission characteristic of a rail milling train[J]. Chengdu:Southwest Jiaotong University,2017.
[39] 许孝堂,王衡禹,吴磊,等. 水介质对钢轨高速被动式打磨影响的试验研究[J]. 润滑与密封,2016,41(11):41-44. XU Xiaotang,WANG Hengyu,WU Lei,et al. An experimental study on high-speed rail grinding under wet condition[J]. Lubrication Engineering,2016,41(11):41-44.
[40] 许孝堂. 钢轨高速打磨机理研究[D]. 成都:西南交通大学,2016. XU Xiaotang. Study on the mechanism of rail high speed grinding[D]. Chengdu:Southwest Jiaotong University,2016.
[41] 王荣全. 面向钢轨打磨的砂带磨削过程建模与实验研究[D]. 北京:北京交通大学,2016. WANG Rongquan. The modeling and experimental research of belt-grinding process in rail grinding[D]. Beijing:Beijing Jiaotong University,2016.
[42] HE Z,LI J Y,LIU Y M,et al. Investigating the effects of contact pressure on rail material abrasive belt grinding performance[J]. International Journal of Advanced Manufacturing Technology,2017,93(1-4):779-786.
[43] WANG W X,LI J Y,FAN W G,et al. Characteristic quantitative evaluation and stochastic modeling of surface topography for zirconia alumina abrasive belt[J]. International Journal of Advanced Manufacturing Technology,2017,89(9-12):3059-3069.
[44] 王文玺,李建勇,樊文刚,等. 基于赫兹接触的钢轨砂带打磨功率预测模型[J]. 中国铁道科学,2017,38(3):25-30. WANG Wenxi,LI Jianyong,FAN Wengang,et al. Grinding power prediction model for abrasive belt rail grinding based on Hertzian contact[J]. China Railway Science,2017,38(3):25-30.
[45] 王立峰. 基于虚拟样机的高铁钢轨闭式砂带打磨小车设计与优化[D]. 北京:北京交通大学,2017. WANG Lifeng. Design and optimization of high speed rail closed belt grinding vehicle based on virtual prototype[D]. Beijing:Beijing Jiaotong University,2017.
[46] 樊文刚,程继发,吴月峰,等. 基于内凹型接触轮的钢轨砂带打磨静态接触行为与仿真研究[J]. 机械工程学报,2018,54(14):152-158. FAN Wengang,CHENG Jifa,WU Yuefeng,et al. Research on static contact behavior and simulation for rail grinding by abrasive belt based on concave type contact wheel[J]. Journal of Mechanical Engineering,2018,54(14):152-158.
[47] 樊文刚,程继发,吕洪宾,等. 波浪型面钢轨砂带打磨时变接触行为与仿真研究[J]. 机械工程学报,2018,54(4):87-92. FAN Wengang,CHENG Jifa,LÜ Hongbin,et al. Research on time-varying contact behavior and simulation for waved rail surface grinding by abrasive belt[J]. Journal of Mechanical Engineering,2018,54(4):87-92. |