网络化协作加工设备约束特性及一种优化选择方法

doi:10.3901/JME.2018.13.192

机械工程学报 ›› 2018, Vol. 54 ›› Issue (13): 192-201.doi: 10.3901/JME.2018.13.192

扫码分享

网络化协作加工设备约束特性及一种优化选择方法

尹超, 赵旭, 邱磊

重庆大学机械传动国家重点实验室重庆 400044

收稿日期:2017-08-18 修回日期:2017-12-19 出版日期:2018-07-05 发布日期:2018-07-05
作者简介:尹超,男,1974年出生,博士,教授,博士研究生导师。主要研究方向为制造业信息化、云制造和网络化制造等。E-mail:ych925@cqu.edu.cn;赵旭,男,1990年出生。主要研究方向为制造系统工程和网络化制造。E-mail:tinysword@163.com;邱磊,男,1991年出生。主要研究方向为制造系统工程和网络化制造。E-mail:qiulei0427@126.com
基金资助:
国家高技术研究发展计划（863计划，2015AA043801）和广东省省级科技计划（2015A010103022）资助项目。

Constraint Characteristics and an Optimal Selection Method of Networked Collaborative Manufacturing Equipment

YIN Chao, ZHAO Xu, QIU Lei

The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044

Received:2017-08-18 Revised:2017-12-19 Online:2018-07-05 Published:2018-07-05

摘要/Abstract

摘要： 针对网络化协作加工设备优化选择过程中加工设备种类繁多、优选目标多样、设备属性与优选目标之间约束关系复杂等问题，建立了网络化协作加工设备的属性构成模型，在此基础上建立了一种包括网络化协作加工设备属性、优化选择目标及其之间的约束关系的约束特性框架模型，进而基于粗糙集理论建立了获取约束特性函数的数学模型，提出了一种基于约束特性的网络化协作加工设备优化选择方法并进行了算法求解，最后设计并开发了网络化协作加工设备优化选择支持系统，并在重庆某企业进行了试验应用，取得了较好的效果。

关键词: 多目标优化, 网络化制造, 协作加工, 优选决策, 约束特性

Abstract: To select networked collaborative manufacturing equipment(NCME) optimally with the restriction of NCME's attributes and the selection targets, the attribute model of NCME is built, then a model of constraint characteristics is built, which include the attributes, the selection targets and the relationship between them. After the mathematic model is established and solved, a selection method of NCME is proposed. With Rough Set theory based, the mathematic model is solved, the constraint characteristic model is built. Based on the model, the structure of optimal selection system for networked collaborative equipment is designed, both the function structure and the operation mode are also built. Finally, this system is tested in an enterprise with a good effect.

Key words: collaborative manufacturing, constraint characteristics, decision making, multiobjective optimization, networked manufacturing

中图分类号:

TH166

尹超, 赵旭, 邱磊. 网络化协作加工设备约束特性及一种优化选择方法[J]. 机械工程学报, 2018, 54(13): 192-201.

YIN Chao, ZHAO Xu, QIU Lei. Constraint Characteristics and an Optimal Selection Method of Networked Collaborative Manufacturing Equipment[J]. Journal of Mechanical Engineering, 2018, 54(13): 192-201.

参考文献

[1] BEHNAMIAN J, FATEMI G S M T. The heterogeneous multi-factory production network scheduling with adaptive communication policy and parallel machine[J]. Information Sciences, 2013, 219:181-196.
[2] VALILAI O F, HOUSHMAND M. A collaborative and integrated platform to support distributed manufacturing system using a service-oriented approach based on cloud computing paradigm[J]. Robotics and ComputerIntegrated Manufacturing, 2013, 29(1):110-127.
[3] GOLIGHTLY D, SHARPLES S, PATEL H, et al. Manufacturing in the cloud:A human factors perspective[J]. International Journal of Industrial Ergonomics, 2016, 55:12-21.
[4] LI B H, ZHANG L, CHAI X, et al. Research and applications of cloud manufacturing in China[M]. Cloud-Based Design and Manufacturing (CBDM). Springer International Publishing, 2014:224-230.
[5] THAMES J L. Distributed, collaborative and automated cybersecurity infrastructures for cloud-based design and manufacturing(CBDM)[J]. A Service-Oriented Product Development Paradigm for the 21st Century. 2014:207-229.
[6] 李伯虎,张霖,王时龙,等. 云制造——面向服务的网络化制造新模式[J]. 计算机集成制造系统,2010,16(1):1-7. LI Bohu, ZHANG Lin, WANG Shilong, et al. Cloud manufacturing:A new service-oriented networked manufacturing model[J]. Computer Integrated Manufacturing Systems, 2010, 16(1):1-7.
[7] 高峰,胡庆夕,李培根,等. 基于制造约束的零件可制造性评价[J]. 华中理工大学学报, 1997, 25(3):21-23. GAO Feng, HU Qingxi, LI Peigen, et al. The manufacturability evaluation of parts based on manufacturing constraints[J]. Huazhong Univ. of Sci. &Tech., 1997, 25(3):21-23.
[8] 郑丹晨,莫蓉,陈涛. 基于历史和制造约束的可制造性分析系统实现[J]. 航空计算技术, 2010, 40(3):85-89. ZHENG Danchen, MO Rong, CHEN Tao. Realization of manufaturability evaluation system based on past designs and manufature constraints[J]. Aeronautical Computing Technique, 2010, 40(3):85-89.
[9] 尹超,李涛,刘飞,等. 网络化外协加工资源选择的决策框架模型及应用[J]. 机械工程学报, 2010, 46(19):133-139. YIN Chao, LI Tao, LIU Fei, et al. Decision-making framework model for networked outsourcing resources selection[J]. Journal of Mechanical Engineering, 2010, 46(19):133-139.
[10] WADHWA V, RAVINDRAN A. Vendor selection in outsourcing[J]. Computers and Operations Research, 2007, 34(12):3725-3737.
[11] ARAZ C, MIZRAK O, OZKARAHAN I. An integrated multicriteria decision-making methodology for outsourcing management[J]. Computers & Operations Research, 2007, 34(12):3738-3756.
[12] 尹胜,尹超,刘飞,等. 多任务外协加工资源优化配置模型及遗传算法求解[J]. 重庆大学学报, 2010, 33(3):49-55. YIN Sheng, YIN Chao, LIU Fei, et al. Optimal allocation model and its genetic algorithms of outsourcing production resources in multi-task[J]. Journal of Chongqing University, 2010, 33(3):49-55.
[13] LIOU J H, CHUANG Y T. Developing a hybrid multi-criteria model for selection of outsourcing providers[J]. Expert Systems with Applications, 2010(37):3755-3761.
[14] ALMEIDA A T. Multicriteria decision model for outsourcing contracts selection based on utility function and electre method[J]. Computers and Operations Research, 2007, 34(12):3569-3574.
[15] 尹胜,尹超,刘飞,等. 云制造环境下外协加工资源集成服务模式及语义描述[J]. 计算机集成制造系统, 2011, 17(3):525-532. YIN Sheng, YIN Chao, LIU Fei, et al. Outsourcing resources integration service mode and semantic description in cloud manufacturing environment[J]. Computer Integrated Manufacturing Systems, 2011, 17(3):525-532.
[16] TAVARES NETO R F, GODINHO FIHO M. An ant colony optimization approach to a permutational flowshop scheduling problem with outsourcing allowed[J]. Computers and Operations Research, 2011, 38(9):1286-1293.
[17] 赵建华,郭琦全. 系统资源约束理论与实践[M]. 北京:中国时代经济出版社, 2007. ZHAO Jianhua, GUO Qiquan. Constraint theory & practice of system resource[M]. Beijing:China Time Economy Press, 2007.
[18] 吴永明, 马剑. 可重组制造系统中加工设备资源的优化配置重构[J]. 中国机械工程, 2009, 20(2):176-181. WU Yongming, MA Jian. Optimum reconfiguration of machining equipment in reconfigurable manufacturing systems[J]. China Mechanical Engineering, 2009, 20(2):176-181.
[19] KURGAN L A, CIOS K J. CAIM discretization algorithm[J]. IEEE Transactions on Knowledge and Data Engineering, 2004, 16(2):145-153.
[20] ΦHRN A. Discernibility and rough sets in medicine:tools and applications[D]. Trondheim:Norwegian University of Science and Technology, 1999.
[21] PAWLAK Z. Rough set[J]. International Journal of Computer and Information Science, 1982, 11(5):341-356.
[22] GE Yong, CAO Feng, LAKHAN V C. Application of rough set-based analysis to extract spatial relationship indicator rules:An example of land use in pearl river Delta[J]. Journal of Geographical Sciences, 2011, 21(1):101-117.

网络化协作加工设备约束特性及一种优化选择方法

Constraint Characteristics and an Optimal Selection Method of Networked Collaborative Manufacturing Equipment

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周晨, 徐飞翔. 四轮独立转向车辆转向模式切换轨迹多目标优化方法研究[J]. 机械工程学报, 2024, 60(6): 306-320.
[2]	柴依扬, 张乐乐, 窦伟元, 张海峰. 基于并行NSGA-III算法的高速列车车体侧墙结构高维多目标优化[J]. 机械工程学报, 2024, 60(6): 321-333.
[3]	苏建涛, 董绍华, 朱诗敏. 多目标混合流水车间机器故障重调度问题研究[J]. 机械工程学报, 2024, 60(4): 438-448.
[4]	唐红涛, 魏书鹏, 李西兴, 雷德明, 汪开普. 考虑排队因素的多车型车辆配置与路径协同优化[J]. 机械工程学报, 2024, 60(4): 458-472.
[5]	吕利叶, 鲁玉军, 王硕, 刘印, 李昆鹏, 宋学官. 代理模型技术及其应用：现状与展望[J]. 机械工程学报, 2024, 60(3): 254-281.
[6]	王旭, 姜兴宇, 杨国哲, 孙猛, 于沈弘, 毕凯航, 赵日铮, 刘伟军. 基于PSO-SSA的激光清洗装备人机界面布局优化研究[J]. 机械工程学报, 2024, 60(20): 372-387.
[7]	熊瑞, 李正阳, 燕润博, 杨瑞鑫. 全气候自热锂离子电池及低温极速加热策略研究[J]. 机械工程学报, 2024, 60(18): 247-257.
[8]	梁旭, 张建勇, 李国涛, 苏婷婷, 何广平, 侯增广. 面向骨折复位手术的冗余并联机构：设计、建模与性能分析[J]. 机械工程学报, 2024, 60(17): 133-146.
[9]	王洪亮, 雍健羽, 皮大伟, 谢伯元, 王尔烈, 王显会. 基于贝塞尔曲线和多目标优化方法的多车队形切换轨迹规划[J]. 机械工程学报, 2024, 60(16): 270-279.
[10]	赵峰, 胡伟飞, 李光, 邓晓豫, 刘振宇, 郭云飞, 谭建荣. 基于混合指标自适应采样代理模型的多目标优化设计方法[J]. 机械工程学报, 2024, 60(13): 81-91.
[11]	王娟, 刘美红, 祝世兴, 陈文博, 李遇贤, 孙军锋. 指尖密封结构参数的多目标混合教与学优化方法[J]. 机械工程学报, 2023, 59(9): 157-170.
[12]	张新彤, 张成明, 李立毅, 傅鹏睿. 电推进用高效轻质永磁同步电机的设计方法[J]. 机械工程学报, 2023, 59(8): 181-195.
[13]	刘伟军, 索英祁, 姜兴宇, 田志强, 张栋, 杨国哲, 王弘玥, 韩清冰. 激光清洗过程低碳建模与工艺参数优化[J]. 机械工程学报, 2023, 59(7): 276-294.
[14]	王亚良, 高康洪, 范欣宇, 金寿松. 面向不确定性的车间布局调度集成建模与优化[J]. 机械工程学报, 2023, 59(5): 235-246.
[15]	徐弓岳, 冯泽民, 郭二廓. 正铲液压挖掘机三副摇杆工作机构的超多目标优化设计[J]. 机械工程学报, 2023, 59(3): 54-65.