[1] SU Z Q. Editorial introduction to the 19th world conference on non-destructive testing (WCNDT-2016)[J/OL]. Ultrasonics, 2016, 71:A1.[2016-09-01]. http://dx.doi.org/10.1016/j.ultras.2016.06.020 [2] CHAUVEAU D, GINZEL E, SJERVE E, el al. New ISO calibration block for phased array ultrasonic testing[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [3] HARRICH X, COPERET P. FAAST very fast phased array system[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany,2016. [4] ROBERT S, CARTIER F, DE ROUMILLY, et al. Adaptive ultrasonic imaging with a phased-array probe equipped with a water-filled conformable wedge[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [5] OBERDÖRFER Y. A simplified approach for DAC with phased-array[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [6] WALTER S, HERZOG T, SCHUBERT F, et al. Comparison of ultrasonic phased array probes based on PMN-PT and PZT 1-3 composites[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [7] SCHMITTE T, HEMITZ O, CHICHKOV N, et al. Application of the total focusing method for improved defect characterization in the production of steel tubes[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [8] DEUTSCH K, ROYE W, RAST H, et al. High resolution phased array imaging using the total focusing method[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing,Munich, Germany, 2016. [9] GROTENHUIS R, CHEN A, HONG A, et al. Application of a FMC/TFM ultrasonic system to inspection of austenitic welds[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [10] DEVOS D, MAES G, TREMBLAY P. Optimized semi-flexible matrix array probes for large rotor shafts and DGS sizing diagram simulation tool[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [11] ZHOU Z G, LI Y, ZHOU W B. Research on correction and optimization of post-processing imaging of structure with non-planar interface using full matrix data of ultrasonic array[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [12] LAMARRE A. Improved inspection of CRA-clad pipe welds with accessible advanced ultrasonic phased-array technology[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [13] DUPONT B, ROLLAND J Y, VERDEIL G, et al. Use of sectorial scanning for anisotropic weld inspection[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [14] STAIR S, MOORE D, NELSON C, et al. Bondline boundary assessment of cohesive bonded solid woven carbon fiber composites using advanced diagnostic methods[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [15] TURCOTTE J, RIOUX P, LAVOIE J A. Comparison corrosion mapping solutions using phased array, conventional UT and 3D scanners[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [16] LEBER L, BENOIST G, DAINELLI P. Corrosion detection and measurement improvement using advanced ultrasonic tools[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [17] ROY O, BENOIST P, BERGALONNE P, et al. Measurement of residual thickness in case of corrosion close to the welds with an adaptive total focusing method[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [18] GUIBERT F, RAFRAFI M, RODAT D, et al. Smart NDT tools:Connection and automation for efficient and reliable NDT operations[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [19] BARUT S, DOMINGUEZ N. NDT diagnosis automation:a key to efficient production in the aeronautic industry[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [20] HENKEL C, SPERL M, DE ODORICO W. New highly productive phased array ultrasonic testing machine for aluminium plates for aircraft applications[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [21] SCHMITTE T, CHICHKOV N, NEMITZ O, et al. Automated ultrasonic testing of large casted cask bodies using phased array techniques[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [22] PAVLOVIC M, MÜLLER C, RONNETEG U. Reliability Analysis of the phased-array ultrasonic system used for the inspection of friction stir welds of copper canisters[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [23] DOBIGNY B, WATTIAU O, BEY S, et al. Development of a robotic nozzle inspection with a flexible transducer array[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [24] PENG C, GAO X R, ZHANG Y, et al. Study of railway axle ultrasonic testing technology and ability improvement[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [25] DESAI A. Advances in ultrasonic inspection of high speed and high integrity rail wheels[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [26] BETHKE S, KURZ J. Near-service ultrasonic testing of solid axles on vehicles with corrosive load and its technical implementation[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [27] KNAM A, SCHWENDER T, KAPPES W, et al. RAWIS:the next generation of automated inspection systems for railway wheels[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [28] VÖLZ U, HEILMANN P, SPIEKER M. New approach for a more detailed visualization of ultrasonic testing data of railway hollow axles[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [29] GAUNA I, ÁLVAREZ A, FLÓREZ D, et al. Study of a train axle inspection system for automatically detecting defects in hollow axles[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [30] ZHANG Y, GAO X R, PENG J P, et al. Research on non-contact immersion ultrasonic testing method for hollow axles[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [31] CUEVAS A E, CABELLOS E, HERNANDEZ S. Robot-based solutions for NDT inspections:Integration of laser ultrasonics and air coupled ultrasounds for aeronautical components[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [32] SCHADOW F, GAAL M, BARTUSCH J, et al. Focusing air-coupled ultrasonic transducers based on ferroelectrets[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [33] HUBER A. Non-destructive testing of future rocket boosters using air-coupled ultrasound[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [34] HILLGER W. New developments for air-coupled ultrasonic techniques[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [35] ADEBAHR W, BERNHARDT Y, KREUTZBRUCK M. 3D-robotized air-coupled ultrasound measurements of large components[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [36] STEINHAUSEN R, KIEL M, PIENTSCHKE C, et al. New approaches to air-coupled ultrasound testing of composite lightweight materials[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [37] ROITHER J, MITTER T, BEITINGER B, et al. Detection of casting defects in aluminum slabs by laser ultrasonic measurement[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [38] KRIX D, SCHMIDT R, MOTA M, et al. Laser ultrasonic characterization of rolled steel strip:wave propagation in inhomogeneous thin sheets[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [39] HAYASHI T, FUKUYAMA M, ISHIHARA K. Fast non-contact defect imaging with scanning laser source technique[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [40] WU T C, KOBAYASHI M, CHENG C C, et al. Flexible ultrasonic transducer for laser ultrasound imaging of defects in curved structures[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [41] TSENG S P, WU C H, YANG C H. Fast inversion calculation for full-field measurement of material properties with quantitative laser ultrasound visualization system[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [42] KELKEL B, SEBASTIAN R, GURKA M, et al. A new concept for the non-destructive testing of fiber-reinforced plastics via laser generated ultrasonic guided waves[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [43] ZHOU Z G, ZHANG K S. Evaluation of friction stir welding process by laser ultrasonic method with synthetic aperture focusing technique[C/DK]//Proceedings of the 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016. [44] 耿荣生. 更快、更可靠和更直观——第16届世界无损检测会议综述[J]. 无损检测, 2004, 26(11):565-569. GENG Rongsheng. Faster, more reliable and more intuitive:An overview of the 16th world conference on nondestructive testing[J]. NDT, 2004, 26(11):565-569. [45] 沈功田. 中国无损检测与评价技术的进展[J]. 无损检测, 2008, 30(11):787-793. SHEN Gongtian. Progress of nondestructive testing and evaluation in china[J]. NDT, 2008, 30(11):787-793. [46] 金宇飞. 面对工业4.0的中国无损检测[J]. 无损检测, 2016, 38(5):58-62. JIN Yufei. Industry 4.0 and nondestructive testing of china[J]. NDT, 2016, 38(5):58-62. [47] 周正干, 刘斯明. 非线性无损检测技术的研究、应用和发展[J]. 机械工程学报, 2011, 47(8):2-11. ZHOU Zhenggan, LIU Ssiming. Nonlinear ultrasonic techniques used in nondestructive testing:A review[J]. Chinese Journal of Mechanical Engineering, 2011, 47(8):2-11. [48] 周正干, 李洋, 周文彬. 相控阵超声后处理成像技术研究、应用和发展[J]. 机械工程学报, 2016, 52(6):1-11. ZHOU Zhenggan, LI Yang, ZHOU Wenbin. Ultrasonic phased array post-processing imaging techniques:A review[J]. Journal of Mechanical Engineering, 2016, 52(6):1-11. [49] 周正干, 魏东. 空气耦合超声波无损检测技术的发展[J]. 机械工程学报, 2008, 44(6):10-14. ZHOU Zhenggan, WEI Dong. Progress of air-coupled ultrasonic non-destructive testing technology[J]. Chinese Journal of Mechanical Engineering, 2008, 44(6):10-14. |