• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

机械工程学报 ›› 2016, Vol. 52 ›› Issue (18): 1-7.doi: 10.3901/JME.2016.18.001

• 仪器科学与技术 •    下一篇

扫码分享

变化环境下的超声导波结构健康监测研究进展*

邓菲1, 刘洋2, 诸葛霞1, 黄晶1   

  1. 1. 宁波工程学院电子与信息工程学院 宁波 315211;
    2. 上海应用技术大学电气与电子工程学院 上海 201418
  • 出版日期:2016-09-20 发布日期:2016-09-20
  • 作者简介:

    作者简介：邓菲，女，1977年出生，博士，副教授。主要研究方向为现代测控技术及方法。

    E-mail：dengfei@emails.bjut.edu.cn

    刘洋(通信作者)，女，1991年出生。主要研究方向为超声无损检测技术。

    E-mail：ly895yl@sina.com

    E-mail：zhugexia@nbut.edu.cn

    E-mail：hjj_68@sohu.com

  • 基金资助:
    * 浙江省自然科学基金(LY15F010006)和宁波工程学院科研启动金(0080011540161)资助项目; 20151224收到初稿，20160317收到修改稿;

Progress on the Research of Ultrasonic Guided Wave Structural Health Monitoring in the Changing Ambient

DENG Fei1, LIU Yang2, ZHUGE Xia1, HUANG Jing1   

  1. 1. School of Electron and Information Engineering， Ningbo University of Technology， Ningbo 315211;
    2. School of Electrical and Electronic Engineering， Shanghai Institute of Technology， Shanghai 201418
  • Online:2016-09-20 Published:2016-09-20

PDF

763

摘要：

超声导波结构健康监测(Structural health monitoring， SHM)在大规模板和管结构的缺陷诊断中是一个极具吸引力的检测技术。不同研究者均证实环境和操作条件变化，特别是温度和外加载荷变化会掩盖由缺陷引起的信号变化从而限制SHM系统的性能。分别就环境变化中温度和外加载荷对SHM系统中超声导波传播机理的影响进行综述：环境温度的变化会引起样本热膨胀系数和弹性模量的改变，进而影响超声导波在结构中的传播，且相比于超声纵向导波，横波对温度的敏感度较低;外加载荷对导波传播的影响主要体现在时移、幅值及相位的变化上。针对温度变化对导波结构健康监测造成的影响，详细阐述温度补偿法的研究进展，为更好地辨识由缺陷引起的变化和由周围环境引起的良性变化奠定理论基础，为后续超声导波SHM的研究指明方向。

关键词: 环境温度, 结构健康监测, 外加载荷, 温度补偿, 超声导波

Abstract:

：Ultrasonic guided wave structural health monitoring(SHM) is an attractive technique in the diagnosis of large scale structure, such as board and tube. It has been demonstrated by different authors that environmental and operating conditions, especially temperature and applied loads variations may cover up the signal changes caused by the defects, which consequently limit the performance of SHM system. The effect of environmental changes in temperature and load on ultrasonic guided wave propagation mechanism in SHM system are discussed：The variations of ambient temperature may evoke changes in sample thermal expansion coefficient and elastic modulus, thereby affecting the propagation of ultrasonic guided waves in the structure, in addition, compared to ultrasonic longitudinal guided waves, there exist a lower temperature sensitivity in shear; the effect of applied load on the guided wave propagation is mainly reflected in the change of time shift, amplitude and phase. In view of the influence about ambient temperature on guided wave structure health monitoring, the progress of temperature compensation strategies is also discussed in detail aiming to provide a theoretical foundation for better identifying variations caused by the defect and the benign changes due to the surrounding environment and indicate directions for subsequent ultrasonic guided wave SHM research.

Key words: ambient temperature, applied loads, structural health monitoring, temperature compensation, ultrasonic guided waves

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30