单螺杆膨胀机泄漏通道长度变化规律的理论分析

doi:10.3901/JME.2015.24.126

机械工程学报 ›› 2015, Vol. 51 ›› Issue (24): 126-131.doi: 10.3901/JME.2015.24.126

• 可再生能源与工程热物理 • 上一篇下一篇

扫码分享

单螺杆膨胀机泄漏通道长度变化规律的理论分析

沈丽丽^{1, 2, 3}, 王伟^{1, 2, 3}, 吴玉庭^{1, 2, 3}

1. 北京工业大学环境与能源工程学院北京 100124；
2. 北京工业大学传热强化与过程节能教育部重点实验室北京 100124；
3. 北京工业大学传热与能源利用北京市重点实验室北京 100124

收稿日期:2014-12-10 修回日期:2015-09-15 出版日期:2015-12-15 发布日期:2015-12-15
通讯作者: 王伟，男，1978年出生，博士，助理研究员，硕士研究生导师。主要研究方向为可再生能源技术与建筑节能。 E-mail：wang_wei@bjut.edu.cn
作者简介:沈丽丽，女，1991年出生。主要研究方向为可再生能源技术与建筑节能。 E-mail：101996sll@163.com
基金资助:
北京市教委科技(KM201510005012)和国家重点基础研究发展计划(973计划，2013CB228306)资助项目

Theoretical Analysis of Variation of Leakage Path Length in Single Screw Expander

SHEN Lili^{1, 2, 3}, WANG Wei^{1, 2, 3}, WU Yuting^{1, 2, 3}

1. College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124；
2. Key Laboratory of Enhanced Heat Transfer and Energy Conservation of Ministry of Education，Beijing University of Technology, Beijing 100124；
3. Key Laboratory of Heat Transfer and Energy Conversion, Beijing Municipality, Beijing University of Technology, Beijing 100124

Received:2014-12-10 Revised:2015-09-15 Online:2015-12-15 Published:2015-12-15

摘要/Abstract

摘要： 对于回转式的容积型膨胀机，内部泄漏是影响其性能的重要因素。单螺杆膨胀机具有复杂的三维空间结构，使得其内部泄漏规律变得很复杂。为了研究单螺杆膨胀机内泄漏规律，从单螺杆膨胀机的几何结构出发，建立泄漏通道长度的数学模型，并分析进气孔口，螺杆直径和星轮直径等因素对泄漏通道长度的影响规律。结果表明，在进气过程中，当进气孔口完全加入时，泄漏通道L9达到最大值，在膨胀过程中，泄漏通道的长度大小关系依次为L8>L7>L1+L2+L4>L9>L6>L3+L5；单螺杆膨胀机螺头处泄漏通道的长度与内容积比有关，进气过程螺头处泄漏通道的长度随着内容积比的增大而减小；在内容积比不变的情况下，螺杆直径和星轮直径相等(等径)时，直径越大，泄漏线越长，且螺杆直径和星轮直径不相等(不等径)的泄漏线比等径时的更长，受进气孔口的影响更大。通过上述工作，为单螺杆膨胀机内泄漏量的分析计算提供基础数据，并为单螺杆膨胀机的结构优化提供理论指导。

关键词: 不等径, 单螺杆膨胀机, 进气孔口, 内容积比, 泄漏通道

Abstract: Leakage loss has great influence on the performance of rotary positive displacement type expander. Single screw expander has very complex internal leakage law for its sophisticated three-dimensional structure. In order to investigate the internal leakage law of the expander, a mathematical model is built based on the geometry structure, the influence of the size of inlet port and the diameters of the screw and the star wheel on the length of the leakage path is analyzed. Results shows that, during the intake process, the length of leakage path L9 reaches the maximum when intake orifice completely joined, the order of leakage path length relationship in the expansion process is L8>L7>L1+L2+L4>L9>L6>L3+L5. The length of leakage path at the screw head of the expander is related to the internal volume ratio and decreases with the increase of internal volume ratio during the intake process. Under the condition of fixed internal volume ratio, the length of the leakage path rises with the increased diameter of both when the diameters of screw and star wheel are equal, and the inlet port has a far greater impact on leakage path length which is longer in the case of different diameters, which provide basis data for the analysis and calculation of the leakage rate in the single screw expander and theoretical guidance for structure optimization of the expander.

Key words: inlet port, internal volume ratio, leakage path, single screw expander, unequal diameter

沈丽丽, 王伟, 吴玉庭. 单螺杆膨胀机泄漏通道长度变化规律的理论分析[J]. 机械工程学报, 2015, 51(24): 126-131.

SHEN Lili, WANG Wei, WU Yuting. Theoretical Analysis of Variation of Leakage Path Length in Single Screw Expander[J]. Journal of Mechanical Engineering, 2015, 51(24): 126-131.

参考文献

[1] 中华人民共和国国家统计局. 2013年国民经济和社会发展统计公报[EB/OL]. [2014-11-02]. http：//www.stats.
gov.cn/tjsj/zxfb/201402/t20140224_514970.html. National Bureau of Statistics of the People’s Republic of China. 2013 statistical bulletin of national economic and social development[EB/OL]. [2014-11-02]. http：//www.
stats.gov.cn/tjsj/zxfb/201402/t20140224_514970.html.
[2] 顾伟, 翁一武, 曹广益, 等. 低温热能发电的研究现状和发展趋势[J]. 热能动力工程, 2007, 22(2)：115-119.GU Wei, WENG Yiwu, CAO Guangyi, et al. Research status and development trend of low-temperature thermal power[J]. Journal of Engineering for Thermal Energy and Power, 2007, 22(2)：115-119.
[3] QUOILIN S, LEMORT V. Technological and economical survey of organic rankine cycle systems[C/CD]//5th European Conference Economics and Management of Energy in Industry, April 14-17, 2009.
[4] WANG W, WU Y T, MA C F, et al. Preliminary experimental study of single screw expander prototype[J]. Applied Thermal Engineering, 2011, 31：3684-3688.
[5] WANG W, WU Y T, MA C F, et al. Experimental study on the performance of single screw expanders by gap adjustment[J]. Energy, 2013, 62：379-384.
[6] GUSEV S, ZIVIANI D, BELL I, et al. Experimental comparison of working fluids for organic rankine cycle with single-screw expander[C/CD]//15th International Refrigeration and Air Conditioning Conference at Purdue, July 14-17, 2014.
[7] DESIDERI A, Van den BROEK M, GUSEV S, et al. Experimental campaign and modeling of a low-capacity waste heat recovery system based on a single screw expander[C/CD]//22nd International Compressor Engineering Conference at Purdue, July 14-17, 2014.
[8] 彭延海, 吴玉庭, 何为, 等. 单螺杆发动机在不同进气压力下的实验研究[J]. 工程热物理学报, 2014, 35(1)：160-162.PENG Yanhai, WU Yuting, HE Wei, et al. Experimental study of single screw engine at different intake pressure[J]. Journal of Engineering Thermophysics, 2014, 35(1)：160-162.
[9] BEIN T W, HAMILTON J F. Computer modeling of an oil flooded single screw air compressor[C/CD]//Proceeding of Purdue Compressor Technology Conference, 1982.
[10] 金光熹, 林强. 单螺杆压缩机的泄漏通道和泄漏量计算[J]. 流体工程, 1986(1)：19-24. JIN Guangxi, LIN Qiang. Calculation of leakage path and leakage rate in single screw compressor[J]. Journal of Fluids Engineering, 1986(1)：19-24.
[11] 李红旗, 金光熹, 吴业正. 喷油单螺杆压缩机的泄漏分析与计算[J]. 流体工程, 1993(8)：14-18. LI Hongqi, JIN Guangxi, WU Yezheng. Computation and analysis of leakage in oil-injection single screw compressor[J]. Journal of Fluids Engineering, 1993(8)：14-18.
[12] 吴建华, 金光熹, 束鹏程. 单螺杆压缩机内部泄漏及其对性能影响的研究[J]. 西安交通大学学报, 1996, 30(4)：66-71.WU Jianhua, JIN Guangxi, SHU Pengcheng. Investigation of internal leakage in a single screw compressor and its influence on the performance[J]. Journal of Xi’an Jiaotong University, 1996, 30(4)：66-71.
[13] 辛电波, 冯健美, 贾晓晗, 等. 微小间隙内油气两相泄漏的试验研究[J]. 润滑与密封, 2008, 33(11)：4-8.XIN Dianbo, FENG Jianmei, JIA Xiaohan, et al. Experimental investigation on oil-gas two-phase leakage in micro gaps[J]. Lubrication Engineering, 2008, 33(11)：4-8.
[14] WANG Z L, LIU Z, WU W F, et al. Research of leakage characteristics of single screw refrigeration compressors with the multicolumn envelope meshing pair[J]. International Journal of Refrigeration, 2015(49)：1-10.
[15] 辛电波, 彭学院. 喷油单螺杆压缩机热力性能影响因素的试验研究[J]. 流体机械, 2008, 36(4)：4-7.XIN Dianbo, PENG Xueyuan. Experimental study on the influencing factors of thermal performance of an oil-injected single screw compressor[J]. Fluid Machinery, 2008, 36(4)：4-7.
[16] 熊则男, 乔宗亮. 回转式压缩机与泵——共轭件啮合动态测试[M]. 北京：机械工业出版社, 1995. XIONG Zenan, QIAO Zongliang. Rotary compressor and pump：Conjugate meshing dynamic testing[M]. Beijing：China Machine Press, 1995.

单螺杆膨胀机泄漏通道长度变化规律的理论分析

Theoretical Analysis of Variation of Leakage Path Length in Single Screw Expander

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	王祺德, 刘达新, 刘振宇, 谭建荣. 基于复合泄漏通道模型的O型圈密封泄漏率计算方法研究[J]. 机械工程学报, 2023, 59(11): 232-241.
[2]	李锦上. 空间共轭啮合副二次包络面三面共点构造法[J]. , 2011, 47(21): 43-48.