• CN:11-2187/TH
  • ISSN:0577-6686

›› 2014, Vol. 50 ›› Issue (7): 154-160.

• 论文 • 上一篇    下一篇

典型霜冰条件下的风力机翼型优化设计

陈进;蒋传鸿;谢翌;孙振业;王浩煜   

  1. 重庆大学机械传动国家重点实验室
  • 出版日期:2014-04-05 发布日期:2014-04-05

Optimization Design of Airfoil for Wind Turbine under Typical Rime Icing Conditions

CHEN Jin, JIANG Chuanhong, XIE Yi, SUN Zhenye, WANG Haoyu   

  1. State Key Laboratory of Mechanical Transmission, Chongqing University
  • Online:2014-04-05 Published:2014-04-05

摘要: 以翼型型线的表达方法为基础,提出结冰条件下风力机翼型设计方法,并在典型霜冰条件下,基于原始翼型WT180优化设计出一种相对厚度为18%的风力机专用翼型ICE180。在自然转捩情况下,用Rfoil计算了ICE180、WT180及NACA63418三种翼型在不结冰以及霜冰条件下的气动性能;在结冰条件下,用计算流体力学(Computational fluid dynamics, CFD)方法对三种结冰翼型的气动性能进行验证。研究表明,相对于原始翼型WT180,新翼型ICE180既保持了无结冰条件下的良好气动性能,又在主攻角范围内,大幅提高了霜冰条件下的气动性能,且翼型前缘结冰厚度更小。故此,提出的翼型优化设计方法对于霜冰条件下的风力机专用翼型设计具有重要意义。

关键词: 风力机;翼型;霜冰;气动性能;优化设计

Abstract: Based on the expression method of airfoil shape, a design method of wind turbine airfoil is presented and a new wind turbine airfoil with relative thickness of 18%called ICE180 is optimized on the basis of a original airfoil WT180 under typical rime icing conditions. In the condition of natural transition, the method of RFOIL is used to calculate the aerodynamic performance of three different airfoils, ICE180, WT180 and NACA63418, when they are rime iced up and not; the method called computational fluid dynamics (CFD) is used to validate the aerodynamic performance of three different ice airfoils under rime icing conditions . The results show that, compared to the original airfoil WT180, the new airfoil ICE180 keeps good aerodynamic performance under no icing up conditions. Besides, its aerodynamic performance is greatly improved and the thickness of leading edge ice accretion is reduced when iced up in the range of main attack angle. Therefore, the airfoil optimization design method presented contributes to the design of dedicated wind turbine airfoil under rime icing conditions.

Key words: wind turbines;airfoils;rime ice;aerodynamic performance;optimization design

中图分类号: