SAF2906双相不锈钢超塑性研究

›› 2013, Vol. 49 ›› Issue (22): 116-120.

SAF2906双相不锈钢超塑性研究

方远方;任学平;何铎;牛闯;杨林

北京科技大学材料科学与工程学院

发布日期:2013-11-20

Study on Superplasticity of SAF2906 Duplex Stainless Steel

FANG Yuanfang;REN Xueping;HE Duo;NIU Chuang;YANG Lin

School of Materials Science and Engineering, University of Science and Technology Beijing

Published:2013-11-20

摘要/Abstract

摘要： 通过恒温拉伸机对固溶处理与冷轧加工后的SAF2906双相不锈钢进行恒温拉伸试验，分析其在不同条件下超塑性伸长率的变化。利用扫描电镜与透射电镜对其进行内部组织观察，了解其两相比例的变化情况。试验结果表明，SAF2906双相不锈钢中铁素体相(δ相)与奥氏体相(γ相)的两相体积比随固溶温度的变化而改变，随着固溶温度的升高铁素体比例不断上升，其中当铁素体与奥氏体的两相体积比接近1∶1的情况下，SAF2906双相不锈钢展现出良好的超塑性性能；在机械加工方面可以通过提高冷轧压下量的方法提高SAF2906双相不锈钢的超塑伸长率，试验中试样的伸长率随着冷轧变形量的提高而明显增大，当固溶温度为1 100 ℃，冷轧压下量为85%时，变形温度为960 ℃，应变速率为1×103 s1的条件下，SAF2906双相不锈钢伸长率为1 430%。

关键词: SAF2906双相不锈钢, 超塑性, 恒温拉伸, 时效温度

Abstract: SAF2906 duplex stainless steel is tested on an isothermal tensile machine for studying its plastic elongation after be treated by different solutions and cold rolled. The microstructures are observed by scanning electron microscopy (SEM) and transmission electron microscopy(TEM). The results indicate that the volume ratio of δ-ferrite phase to γ-austenite phase varies with the solution temperature, and the SAF2906 duplex stainless steel had an excellent superplastic forming property with the closed 1∶1 volume ratio. The elongation of SAF2906 duplex stainless steel could be enhanced by increasing rolling reduction rate, and the elongation of the specimen solution-treated at 1 100 ℃, rolled on 85% reached to1 430% at a deformation temperature of 960 ℃ and a strain rate of 1×103 s1

Key words: Aging temperatures, Isothermal tensile, SAF2906 duplex stainless steel, Superplasticity

中图分类号:

TG142

方远方;任学平;何铎;牛闯;杨林. SAF2906双相不锈钢超塑性研究[J]. , 2013, 49(22): 116-120.

FANG Yuanfang;REN Xueping;HE Duo;NIU Chuang;YANG Lin. Study on Superplasticity of SAF2906 Duplex Stainless Steel[J]. , 2013, 49(22): 116-120.

[1]	张志豪;刘新华;谢建新. Zr基非晶合金精密直齿轮超塑性成形试验研究[J]. , 2005, 41(3): 151-154.
[2]	许晓静;施连杰;程晓农;蔡兰;吉平平. 40Cr钢低温超塑性的研究[J]. , 2004, 40(7): 141-144.
[3]	张凯锋;王长丽. Zn-Al22合金超塑微成形[J]. , 2004, 40(5): 82-86.
[4]	宋玉泉. 超塑拉伸变形的力学解析[J]. , 2003, 39(10): 64-72.
[5]	宋玉泉;程永春;刘术梅. 超塑性拉伸变形应变速率敏感性指数的试验测量及其精细分析[J]. , 2001, 37(4): 1-7.
[6]	宋玉泉;程永春;刘术梅. 超塑拉伸变形应变速率敏感性指数的力学解析[J]. , 2001, 37(3): 5-10.
[7]	宋玉泉;程永春;王习文. 拉伸变形应变速率敏感性指数的力学涵义及其规范测量[J]. , 2000, 36(8): 33-38.
[8]	姚枚;王仁智. 金属材料工程力学行为学及其微细观过程理论[J]. , 2000, 36(11): 1-4.
[9]	高士友;沈焕祥;苏岩;刘文珠;张月君. 铸态铝锰黄铜的超塑性及超塑成形[J]. , 1998, 34(2): 99-103.
[10]	沈焕祥;高世友;苏升贵;高明. 铸态铝黄铜的超塑性[J]. , 1993, 29(3): 36-39.
[11]	王利杰;饶孝权. 对碳钢相变超塑性变形的探讨[J]. , 1990, 26(4): 42-44.