• CN:11-2187/TH
  • ISSN:0577-6686

›› 2007, Vol. 43 ›› Issue (6): 194-199.

• 论文 • 上一篇    下一篇

矩阵变换器的电压传输特性

张小平;唐华平;朱建林;张建华;岳舟   

  1. 中南大学机电工程学院;湖南科技大学信息与电气工程学院
  • 发布日期:2007-06-15

VOLTAGE TRANSFER CHARACTERISTIC OF MATRIX CONVERTER

ZHANG Xiaoping;TANG Huaping;ZHU Jianlin;ZHANG Jianhua;YUE Zhou   

  1. College of Mechanical and Electrical Engineering, Central South University College of Information and Electrical Engineering, Hunan University of Science and Technology College of Information Engineering, Xiangtan University
  • Published:2007-06-15

摘要: 提出两种提高矩阵变换器电压传输比的有效方法:谐波注入法和过调制法。阐述这两种方法的基本原理,对比分析它们的不同特点,并通过仿真和物理样机试验验证了这两种方法的可行性和有效性。结果表明:这两种方法都能使电压传输比最大提高到1.0,同时输出电压中的谐波含量相应增大。比较两种方法所产生谐波的特点及其抑制对策和适用范围,对工程应用有一定的参考作用。

关键词: 电压传输比, 过调制, 矩阵变换器, 谐波注入

Abstract: Two effective methods, namely the method of harmonic injection and overmodulation, to increase the voltage transfer ratio of matrix converter, are proposed. After the fundamental principles of these two methods are clarified, their different characteristics are analyzed. Then their feasibility and validity are tested by simulation and physical prototype experiment. The results indicate that these two methods can both increase maximally the ratio of voltage transfer to 1.0, though the harmonic in the output voltage increases correspondingly. The characteristics of the harmonic generated by these two methods are also compared and the strategies to suppress it are discussed. Inspiration may be provided for further engineering application.

Key words: Harmonic injection Overmodulation, Matrix converter, Voltage transfer ratio

中图分类号: