基于CAN总线的电阻焊网络控制系统

›› 2006, Vol. 42 ›› Issue (4): 147-151.

基于CAN总线的电阻焊网络控制系统

陈益平;胡德安;邓子飞;李唐柏;陈鹏展

南昌航空工业学院材料科学与工程系

发布日期:2006-04-15

RESISTANCE WELDING NETWORK CONTROL SYSTEM BASED ON CAN BUS

CHEN Yiping;HU Dean;DENG Zifei;LI Tangbai;CHEN Pengzhan

Department of Material Science and Engineering, Nanchang Institute of Aeronautical Technology

Published:2006-04-15

摘要/Abstract

摘要： 介绍了CAN总线特点，分析了电阻焊网络控制系统的工作原理和硬件结构，制定了适合电阻焊生产的CAN通信协议，设计了底层电阻焊网络控制器的控制软件、上/下位机通信软件和上层管理软件。试验结果表明，设计的基于CAN总线的电阻焊网络控制器具有控制精度高、工作稳定可靠、通信速度快和可扩展性强等特点，能够实现电阻点焊的在线网络控制与数据管理，可以应用于焊接单元制造信息网络智能集成。

关键词: CAN总线, 电阻焊, 网络控制系统

Abstract: The characteristic of CAN bus is introduced, the principle and hardware construction of resistance welding network control system are analyzed. The communication protocol for resistance welding is determined. The commun- ication software, control software and management software are designed. The experiment result of resistance spot welding shows the controller runs rapidly and stably, and can be stretched easily. The controller can realize on-line control and data management in resistance spot welding, and can be used to the intelligent integration of information net for welding unit manufacturing.

Key words: Network control system, CAN bus, Resistance spot welding

中图分类号:

TG409

陈益平;胡德安;邓子飞;李唐柏;陈鹏展. 基于CAN总线的电阻焊网络控制系统[J]. , 2006, 42(4): 147-151.

CHEN Yiping;HU Dean;DENG Zifei;LI Tangbai;CHEN Pengzhan. RESISTANCE WELDING NETWORK CONTROL SYSTEM BASED ON CAN BUS[J]. , 2006, 42(4): 147-151.

[1]	许晓飞;刘志军;史启财;刘凤霞. 电阻焊接波形传热板的应力分析与测试[J]. , 2008, 44(4): 97-101.
[2]	胡宇辉;席军强;陈慧岩. 基于CAN总线的换挡过程控制技术[J]. , 2006, 42(增刊): 209-213.
[3]	王清;张相军;吴林;林尚扬. 全桥零电压开通逆变电阻焊焊接电源研制[J]. , 2002, 38(5): 44-46.
[4]	伍月华;黄石生;邓上云;王志强;李发兴. 逆变式电阻焊机的新发展——IGBT逆变式点焊机[J]. , 1994, 30(4): 97-101.