• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

›› 2005, Vol. 41 ›› Issue (9): 175-179.

• 论文 • 上一篇    下一篇

扫码分享

电火花线切割机床可重构模块划分的理论和应用研究

赵庆志;刘正埙;谷安;朱荻   

  1. 山东理工大学机械工程学院;南京航空航天大学机电学院
  • 发布日期:2005-09-15

THEORETICAL AND APPLICABLE RESEARCH OF MODULUS DIVISION FOR RECONFIGURABLE WIRE ELECTRICAL DISCHARGE MACHINE TOOLS

Zhao Qingzhi;Liu Zhengxun;Gu An;Zhu Di   

  1. College of Mechanical Engineering, Shandong University of Techenology College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronauti
  • Published:2005-09-15

PDF

247

摘要： 分析了零件表面形成三要素确定机床的功能, 提出了以三要素模块为可重构粒度划分可重构机床模块的理论,用该理论容易使可重构机床的设计制造成本最低,为可重构机床的研究、设计和制造打下了比较好的基础, 并在可重构慢走丝电火花线切割机床设计中得到了应用。

关键词: 机床误差, 可重构制造系统, 粒度, 慢走丝电火花线切割机床, 模块

Abstract: That the function of machine tools is determined by three elements of workpiece shapes is analysed. A theory that divides reconfigurable machine tools into modulus according to reconfigurable grain size of three elements modulus is put forward. The cost of reconfigurable machine tools based on the theory will be lowest easily. The theory lays a better foundation for researching、designing and building reconfigurable machine tools. The application of the theory for reconfigurable lower speed wire electrical discharge machine tools( LS-WEDM) is studied.

Key words: Grain size, LS-WEDM, Machine tools error, Modulus, Reconfigurable manufacturing system

中图分类号: 

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30