金属棒料高速精密剪切试验研究

›› 2005, Vol. 41 ›› Issue (5): 154-156.

金属棒料高速精密剪切试验研究

付建华;李永堂;雷步芳;李耀辉

太原科技大学材料科学与工程学院

发布日期:2005-05-15

EXPERIMENTAL RESEARCH ON THE HIGH-SPEED PRECISION SHEARING OF METAL BAR

Fu Jianhua;Li Yongtang;Lei Bufang;Li Yaohui

School of Materials Science and Engineering, Taiyuan University of Science and Technology

Published:2005-05-15

摘要/Abstract

摘要： 针对目前国内外常用下料方法存在断面质量差、生产率低等问题，提出了一种新的棒料高速精密剪切方法与理论。重点分析了各种剪切工艺参数对剪切断面质量的影响并对该高速精密剪切技术进行了试验研究，得到了良好的剪切效果。在此基础上还进行了金相分析对比，深入研究了高速剪切断面的微观组织形态，进一步说明了高速剪切与普通剪切相比具有更好的断面质量。并将此试验得出的有利于改善下料质量的适宜剪切工艺的参数作了总结，有助于该项新技术的推广应用。

关键词: 高速剪切, 金属材料, 精密剪切

Abstract: The influence of various shearing parameters on quality of cracking surface is analyzed. The experiment research of high-speed precision shearing technique is performed and better shearing quality is gotten. On the above basis, the metallography analysis is performed and the microcosmic struc-ture on the cracking surface is researched. This result shows that as compared with common cutting method the high-speed shearing method can get better cracking quality. Some factors influencing the bar shearing quality is discussed and the best shearing parameters is determined, which is conducive to the application and spreading of this new technology.

Key words: High-speed shears, Metal material, Precision shears

中图分类号:

TG315.3

付建华;李永堂;雷步芳;李耀辉. 金属棒料高速精密剪切试验研究[J]. , 2005, 41(5): 154-156.

Fu Jianhua;Li Yongtang;Lei Bufang;Li Yaohui. EXPERIMENTAL RESEARCH ON THE HIGH-SPEED PRECISION SHEARING OF METAL BAR[J]. , 2005, 41(5): 154-156.

[1]	武永红, 李永堂, 齐会萍, 付建华. 基于铸辗连续成形的42CrMo铸造环坯高温力学性能及临界应变计算^*[J]. 机械工程学报, 2017, 53(6): 45-52.
[2]	高卡, 郭晓琴, 张锐. Co-Cu-Pb三元合金的快速凝固组织及电学性能研究[J]. 机械工程学报, 2017, 53(18): 99-105.
[3]	杨永强;宋长辉;王迪. 激光选区熔化技术及其在个性化医学中的应用[J]. , 2014, 50(21): 140-151.
[4]	董恩生;董永贵;吕文尔;贾惠波. 同面多电极电容传感器的仿真与试验研究[J]. , 2006, 42(2): 6-11.
[5]	张永强;俞茂宏. 金属材料的平面应力非连续分叉[J]. , 2001, 37(4): 82-85，8.