正交车铣工件表面形成机理的研究

›› 2004, Vol. 40 ›› Issue (9): 121-124.

正交车铣工件表面形成机理的研究

姜增辉;贾春德

沈阳工业学院高速切削工程技术中心

发布日期:2004-09-15

RESEARCH ON THE FORMING MECHANISM OF SURFACE MACHINED BY ORTHOGONAL TURN-MILLING

Jiang Zenghui;Jia Chunde

Engineering Technology Center for High Speed Machining, Shenyang Institute of Technology

Published:2004-09-15

摘要/Abstract

摘要： 通过数学方法对正交车铣已加工表面的形成机理进行了详细的理论研究，给出了已加工工件理论微观圆度的计算方法和侧母线的数学表达式，由此分析了主要切削参数对理论微观圆度和工件侧母线形成的影响，并对加工圆柱表面时偏心量和轴向进给量的取值范围进行了详细阐述。

关键词: 侧母线, 偏心量, 正交车铣, 轴向进给量

Abstract: The forming mechanism of surface machined by orthogonal turn-milling is researched on detailedly through mathematical method. The calculating method of workpiece’s theoretical micro-roundness and the mathematical expression of workpiece’s side generatrix are given. The influence of the main cutting parameters on the theoretical micro-roundness and the workpiece’s side generatrix is analyzed, and the scale of eccentricity and axial feed is expounded detailedly when machining the cylinder surface.

Key words: Axial feed, Eccentricity, Orthogonal turn-milling, Side generatrix

中图分类号:

TG501

姜增辉;贾春德. 正交车铣工件表面形成机理的研究[J]. , 2004, 40(9): 121-124.

Jiang Zenghui;Jia Chunde. RESEARCH ON THE FORMING MECHANISM OF SURFACE MACHINED BY ORTHOGONAL TURN-MILLING[J]. , 2004, 40(9): 121-124.

[1]	窦永磊汪满新王攀峰黄田. 一种6自由度混联机器人静刚度分析[J]. 机械工程学报, 2015, 51(7): 38-44.
[2]	朱立达;王宛山;李鹤;于天彪. 正交车铣偏心加工三维颤振稳定性的研究[J]. , 2011, 47(23): 186-192.
[3]	姜增辉;贾春德. 无偏心正交车铣理论切削力[J]. , 2006, 42(9): 23-28.
[4]	贾春德;姜增辉. 正交车铣运动的矢量建模及表面粗糙度的理论分析[J]. , 2001, 37(3): 62-64.