用统一强度理论和统一滑移线场理论求解某些塑性平面应变问题

›› 1999, Vol. 35 ›› Issue (6): 61-65.

用统一强度理论和统一滑移线场理论求解某些塑性平面应变问题

赵均海;张永强;李建春;廖红建

西北建筑工程学院建筑工程系;西安交通大学

发布日期:1999-11-01

SOLUTIONS OF SOME PLASTIC PLAIN STRAIN PROBLEMS BASED ON UNIFIED STRENGTH THEORY AND UNIFIED SLIP LINE FIELD THEORY

Zhao Junhai;Zhang Yongqiang;Li Jianchun;Liao Hongjian

Northwestern Institute of Architectural Engineering Xi'an Jiaotong University

Published:1999-11-01

摘要/Abstract

摘要： 采用俞茂宏统一强度理论和统一滑移线场理论分析了高压厚壁圆简的极限载荷，得出了统一解形式，常用的Tresca、Mises、Mohr-Coulomb和双剪强度理论解等均为特例，利用此解可以合理地得出不同材料的相应解，它既可以适用于拉压强度相等的材料，也可以适用于拉压强度不相等的材料，并且能充分发挥材料性能，从而减轻结构重量，取得多方面的效益。

关键词: 厚壁圆简, 极限载荷, 俞茂宏统一强度理论

Abstract: A new method to calculate the limit load of thick wall cylinder under high pressure based on Yu's unified strength theory and unified slip line field theory, and a unified solutions are obtained. Solutions based on Tresca, Mises, Mohr-Coulomb and twin shear strength theories is special cases of the unified solutions. The corresponding solutions of different materials can be got from it. The unified solution can not only be used to fit the properties of the materials with different tension-pressure strength but also the ones with equal tension-pressure strength. The result is of much importance in engineering and economy.

Key words: Thick wall cylinder, Ultimate loads, Yu's unified strength theory

中图分类号:

O344.5

赵均海;张永强;李建春;廖红建. 用统一强度理论和统一滑移线场理论求解某些塑性平面应变问题[J]. , 1999, 35(6): 61-65.

Zhao Junhai;Zhang Yongqiang;Li Jianchun;Liao Hongjian. SOLUTIONS OF SOME PLASTIC PLAIN STRAIN PROBLEMS BASED ON UNIFIED STRENGTH THEORY AND UNIFIED SLIP LINE FIELD THEORY[J]. , 1999, 35(6): 61-65.

[1]	高炳军;周军;董俊华. S30408碟形封头应变强化特性及极限载荷分析[J]. , 2013, 49(4): 89-95.
[2]	李建春;俞茂宏;肖耘. 金属斜板极限载荷的统一解析解[J]. , 2000, 36(8): 25-28.