硬齿面双圆弧齿轮在200铜带轧机上的应用

›› 1988, Vol. 24 ›› Issue (4): 16-18.

硬齿面双圆弧齿轮在200铜带轧机上的应用

邵家辉;梁亚曼

太原工业大学;北京市冶金设备自动化研究所

发布日期:1988-09-01

APPLICATION OF HARDENING FLANK DOUBLE CIRCULAR ARC GEAR IN 200 COLD-ROLLING MILL

Shao Jiahui Liang Yaoman

Taiyuan University of Technology Beijing Metallurgy Equipment Automation Institute

Published:1988-09-01

摘要/Abstract

摘要： 本文简要论述了硬齿面双圆弧齿轮在200轧机中的应用，指出硬齿面双圆弧齿轮具有承载能力高、容易形成油膜、磨损小的种种优点。在中、低速的传动中，采用低温氮化工艺（不磨齿），可有效地满足使用要求。使用寿命比渐开线齿轮成倍提高，能取得良好的经济效益。

关键词: 齿轮机座, 双圆弧齿轮

Abstract: In this paper the application of hardening flank DCA gear in a type 200 cold-rolling mill is briefly introduced. The advantages of hardening flank DCA gear are high loadability, easy formation for oil film and a little wear. Working at the middle and low speed of the transmition, the double circular arc gear can be processed with low-temperature nitration and non-grinding to meeting the need of industry application. The life of the gear is twice as long as involute gear. Therefore, good economic efficiency can be obtained by using the gears. This achievement was Inspected by related experts organized by Beijing Chief Company of Non-ferrous Metal Industry in 1987.

Key words: 齿轮机座, 双圆弧齿轮

邵家辉;梁亚曼. 硬齿面双圆弧齿轮在200铜带轧机上的应用[J]. , 1988, 24(4): 16-18.

Shao Jiahui Liang Yaoman. APPLICATION OF HARDENING FLANK DOUBLE CIRCULAR ARC GEAR IN 200 COLD-ROLLING MILL[J]. , 1988, 24(4): 16-18.

[1]	孙大乐;杨文通;蔡春源. 双圆弧齿轮跑合的计算机仿真[J]. , 1997, 33(1): 9-14.
[2]	杨继斌;齐毓霖;陈谌闻. 用激光透射法测量双圆弧齿轮齿面油膜厚度[J]. , 1990, 26(6): 68-73.
[3]	花家寿;杨开一;陶熊. 硬齿面双圆弧齿轮在船舶中的应用[J]. , 1988, 24(4): 23-26.
[4]	李长春;李育民;胡长衡;董忻年. 高速双圆弧齿轮在炼油设备3000kW透平鼓风机上的应用[J]. , 1988, 24(4): 19-22.
[5]	崔巍;李国权;隋海文;彭胜敌;李长春;厉始忠. 4000kW双圆弧齿轮减速器在18英寸连轧机组主传动上的应用与研究[J]. , 1988, 24(4): 3-6.
[6]	陈谌闻;陈荣增;陈式椿. 双圆弧齿轮的接触疲劳强度计算方法[J]. , 1988, 24(4): 27-33.
[7]	桂正伦;胥思义;邵家辉;阎德波. 太钢大型冷轧机齿轮机座上的双圆弧齿轮[J]. , 1988, 24(4): 11-15.
[8]	傅守仁;李春珠;张振荣;谢贺斌. 双圆弧齿轮在首钢500型钢轧机齿轮机座上的应用[J]. , 1988, 24(4): 7-10.