• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 269-281.doi: 10.3901/JME.260612

• 特邀专栏:人形机器人与具身智能 • 上一篇    

扫码分享

基于磁触觉感知的多模式夹爪研究

王仕贤1, 杨少博2, 李博澳3, 张旭龙2, 闫俊霞1, 方斌2   

  1. 1. 江南大学机械工程学院 江苏 214122;
    2. 北京邮电大学人工智能学院 北京 100876;
    3. 武汉科技大学机械工程学院 湖北 430081
  • 收稿日期:2025-11-13 修回日期:2026-05-12 发布日期:2026-11-20
  • 作者简介:王仕贤,男,2000年出生。多模式机械夹爪的设计,柔性触觉感知方法。E-mail:6230809042@stu.jiangnan.edu.cn;闫俊霞(通信作者),女,1984年出生,博士,副教授,硕士研究生导师。主要研究方向为机械动力学,振动理论与运用。E-mail:yjx@jiangnan.edu.cn
  • 基金资助:
    “脑科学与类脑研究”国家科技重大专项(2025ZD0215600)和国家自然科学基金(62573063,62536001)资助项目。

Research on Multi-mode Gripper Based on Magnetic Sensing

WANG Shixian1, YANG Shaobo2, LI Boao3, ZHANG Xulong2, YAN Junxia1, FANG Bin2   

  1. 1. School of Mechanical Engineering, Jiangnan University, Jiangsu 214122;
    2. School of Artificial Intelligence, Beijing University of Posts and Telecommunications, Beijing 100876;
    3. School of Mechanical Engineering, Wuhan University of Science and Technology, Hubei 430081
  • Received:2025-11-13 Revised:2026-05-12 Published:2026-11-20

摘要: 在复杂的抓取场景中,传统夹爪因抓取策略单一难以适应被抓物体形态与尺度的多样性。尽管引入多自由度驱动并优化机械传动可以赋予夹爪更多的抓取模式,但复杂的机械结构同时也带来设计与控制层面的双重挑战。为此,提出一款多模式机械夹爪,在结构上采用双电机配合气动吸盘的混合驱动方案,通过四指对称构型实现包络、夹取、吸取、捏取四种抓取模式的灵活切换,有效兼顾了抓取的灵活性与负载能力。在触觉感知层面,提出一种内嵌磁性粒子的柔性硅胶技术,该硅胶不仅能作为柔顺界面提供抓取缓冲,更能作为触觉单元实现分布应力的感知。基于采集的磁场数据与训练模型,系统实现了均方误差(Mean squared error, MSE)小于0.003 N2的拟合精度。实验验证表明,该夹爪最大抓取载荷为4 kg(最大包络直径18 cm),吸附载荷为0.8 kg。结合夹爪的多种抓取模式与触觉感知信息,该夹爪在不同物体抓取中达到了90%以上的成功率,验证了其针对不同形状、尺寸物体的适应性与实用性。

关键词: 多模式夹爪, 柔性磁触觉传感器, 高抓取能力, 抓取实验

Abstract: In unstructured environments, conventional grippers with limited grasping modes often struggle to accommodate objects of diverse shapes and sizes. While increasing actuation degrees of freedom can enhance versatility, it often leads to complex mechanical structures that complicate both design and control. To overcome these limitations, this paper presents a novel multi-mode robotic gripper featuring a hybrid electric-pneumatic actuation system. Through a four-finger symmetrical configuration driven by dual motors and a pneumatic source, the gripper enables flexible switching among four distinct modes: enveloping, clamping, suction, and pinching, thereby optimizing the trade-off between dexterity and load capacity. In terms of sensing, a flexible silicone skin embedded with magnetic particles is developed. This integrated skin serves dual purposes: acting as a compliant buffer for stable contact and functioning as a distributed tactile sensor. Leveraging a data-driven model, the system achieves precise force estimation with a Mean Squared Error (MSE) of less than 0.003 N2. Performance tests indicate a maximum grasping payload of 4 kg (max enveloping diameter: 18 cm) and a suction payload of 0.8 kg. By combining multi-mode adaptability with real-time tactile feedback, the proposed gripper demonstrates a success rate of over 90% in grasping experiments, proving its robustness and practicality for handling diverse objects.

Key words: multi-mode gripper, flexible magnetic tactile sensor, high grasping capability, grasping experiment

中图分类号: