动/静平台非一致型并联机构构型分析及设计方法

doi:10.3901/JME.2023.17.116

机械工程学报 ›› 2023, Vol. 59 ›› Issue (17): 116-125.doi: 10.3901/JME.2023.17.116

扫码分享

动/静平台非一致型并联机构构型分析及设计方法

李海虹¹, 董晋安¹, 郭山国², 刘志奇¹

1. 太原科技大学机械工程学院太原 030024;
2. 河北机电职业技术学院机械工程系邢台 054000

收稿日期:2022-07-27 修回日期:2022-11-24 出版日期:2023-09-05 发布日期:2023-11-16
作者简介:李海虹,女,1978年出生,博士,教授,硕士研究生导师。主要研究方向为机器人技术,机构动力学。E-mail:HaihongLi@tyust.edu.cn
基金资助:
国家自然科学基金（51975396）和山西省基础研究计划面上项目（202103021224264）资助项目。

Analysis and Design Method for Non-uniform Parallel Mechanism Structure of Dynamic/Static Platform

LI Haihong¹, DONG Jinan¹, GUO Shanguo², LIU Zhiqi¹

1. College of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024;
2. Department of Mechanical Engineering, Hebei Institute of Mechanical and ElectronicTechnology, Xingtai 054000

Received:2022-07-27 Revised:2022-11-24 Online:2023-09-05 Published:2023-11-16

摘要/Abstract

摘要： 针对动/静平台非一致型并联机构的设计需求，提出一种基于尺度综合的机构构型设计方法。根据拓扑结构设计理论对目标自由度并联机构支链进行构造；确定平台联结铰点的数量及类型，对机构进行初步设计及动平台自由度校核；以一种五自由度动/静平台非一致型并联机构为例，运用一次尺度综合对机构尺寸参数进行一次改进，建立机构初步模型；定义冗余支链和角部支链，通过二次尺度综合对冗余支链位置进行二次改进，完成机构所有尺寸参数的计算，给出机构的整体模型；与相似尺寸下、相近工作空间内Stewart机构的局部传递指标图谱进行对比分析，该机构具有良好的运动/力传递性能，验证了所提出的并联机构构型设计方法的正确性和可行性。

关键词: 螺旋理论, 拓扑设计, 尺度综合, 性能指标

Abstract: Aiming at the design requirements of non-uniform parallel mechanism of moving/static platform, a configuration design method based on dimension synthesis is proposed. The limb of target degree of freedom parallel mechanism is constructed according to topology design theory. The number and type of platform joint points are determined, the mechanism is preliminarily designed and the degree of freedom of the moving platform is checked. Taking a five-degree-of-freedom dynamic/static platform non-uniform parallel mechanism as an example, the first dimension synthesis is used to improve the dimension parameters of the mechanism, and the preliminary model of the mechanism is established. The redundant limb and the angular limb are defined, and the position of the redundant limb is improved by the secondary dimension synthesis. The calculation of all the dimension parameters of the mechanism is completed, and the overall model of the mechanism is given. The reference analysis of the local transmission index map of Stewart mechanism with similar size and similar workspace is carried out, which shows that the mechanism has good motion/force transmission performance, and verifies the correctness and feasibility of the proposed configuration design method of parallel mechanism.

Key words: screw theory, topology design, dimensional synthesis, performance index

中图分类号:

TH112

李海虹, 董晋安, 郭山国, 刘志奇. 动/静平台非一致型并联机构构型分析及设计方法[J]. 机械工程学报, 2023, 59(17): 116-125.

LI Haihong, DONG Jinan, GUO Shanguo, LIU Zhiqi. Analysis and Design Method for Non-uniform Parallel Mechanism Structure of Dynamic/Static Platform[J]. Journal of Mechanical Engineering, 2023, 59(17): 116-125.

参考文献

[1] 陈祥,谢福贵,刘辛军. 并联机构中运动/力传递功率最大值的评价[J]. 机械工程学报,2014,50(3):1-9. CHEN Xiang,XIE Fugui,LIU Xinjun. Evaluation of the maximum value of motion/force transmission power in parallel manipulators[J]. Journal of Mechanical Engineering,2014,50(3):1-9.
[2] 贾璞,李端玲,李海源,等. 基于变胞铰链的并联机构结构设计与构型分析[J]. 机械工程学报,2020,56(19):92-102. JIA Pu,LI Duanling,LI Haiyuan,et al. Structural design and configuration analysis of parallel mechanism with metamorphic joint[J]. Journal of Mechanical Engineering,2020,56(19):92-102.
[3] 孙驰宇,沈惠平,袁军堂,等. 一种新型半对称三平移一转动(3T1R)并联操作手的运动学研究[J]. 中国机械工程,2021,32(6):638-647. SUN Chiyu,SHEN Huiping,YUAN Juntang,et al. Kinematics of a novel three-translation and one-rotation(3T1R) semi-symmetry parallel manipulator[J]. China Mechanical Engineering,2021,32(6):638-647.
[4] 刘伟,刘宏昭,胡旭宇. 具有固定转动轴线和变转动轴线3T1R并联机构构型综合[J]. 农业机械学报,2022,53(2):451-458. LIU Wei,LIU Hongzhao,HU Xuyu. Type synthesis of 3T1R parallel machine with fixed rotation axis and variable rotation axis[J]. Transactions of the Chinese Society for Agricultural Machinery,2022,53(2):451-458.
[5] 李永泉,江洪生,郑天宇,等. 基于图谱法的3平移并联机构型综合[J]. 机械工程学报,2021,57(23):34-46. LI Yongquan,JIANG Hongsheng,ZHENG Tianyu,et al. Type synthesis of 3-translation parallel mechanism based on graphical approach[J]. Journal of Mechanical Engineering,2021,57(23):34-46.
[6] 曾达幸,王华明,樊明洲,等. 3自由度转动广义解耦并联机构构型综合[J]. 机械工程学报,2017,53(3):17-24. ZENG Daxing,WANG Huaming,FAN Mingzhou,et al. Type synthesis of three degrees of freedom rotational generalized decoupling parallel mechanism[J]. Journal of Mechanical Engineering,2017,53(3):17-24.
[7] SIMAS H,SIMONI R,MARTINS D. Triflex II:Design and analysis of a self-aligning parallel mechanism with asymmetrical kinematic structure[J]. Meccanica,2017,52(11):2991-3002.
[8] 董成林,刘海涛,杨俊豪. 一种新型非对称五自由度混联机器人的尺度综合[J]. 中国机械工程,2021,32(20):2418-2426. DONG Chenglin,LIU Haitao,YANG Junhao. Dimensional synthesis of a novel asymmetric 5-DOF hybrid robot[J]. China Mechanical Engineering,2021,32(20):2418-2426.
[9] 曹毅,居勇健,黄河,等. 具有两条连续确定转轴的PRR型并联机构型综合[J]. 华中科技大学学报(自然科学版),2022,50(1):125-131. CAO Yi,JU Yongjian,HUANG He,et al. Type synthesis of PRR parallel mechanisms with two continuous and determined rotational axes[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition),2022,50(1):125-131.
[10] WU G,ZOU P. Comparison of 3-DOF asymmetrical spherical parallel manipulators with respect to motion/force transmission and stiffness[J]. Mechanism and Machine Theory,2016,105:369-387.
[11] ZHANG W,ZHANG W,SHI D,et al. Design of hip joint assistant asymmetric parallel mechanism and optimization of singularity-free workspace[J]. Mechanism and Machine Theory,2018,122:389-403.
[12] GAN D,DAI J S,DIAS J,et al. Reconfigurability and unified kinematics modeling of a 3rTPS metamorphic parallel mechanism with perpendicular constraint screws[J]. Robotics and Computer-Integrated Manufacturing,2013,29(4):121-128.
[13] LI D,JIA P,LI J,et al. Constraint and mobility change analysis of rubik's cube-inspired reconfigurable joints and corresponding parallel mechanisms[J]. Chinese Journal of Mechanical Engineering,2020,33(1):1-11.
[14] LI Y,ZHENG H,CHEN B,et al. Dynamic modeling and analysis of 5-PSS/UPU parallel mechanism with elastically active branched chains[J]. Chinese Journal of Mechanical Engineering,2020,33(1):1-12.
[15] 吴存存,杨桂林,陈庆盈,等. 四自由度2PPPaR并联机构运动学及性能分析[J]. 机械工程学报,2018,54(3):36-45. WU Cuncun,YANG Guilin,CHEN Qingying,et al. Kinematic and performance analysis of a 4-DOF 2PPPaR parallel manipulator[J]. Journal of Mechanical Engineering,2018,54(3):36-45.
[16] MOHANTA J K,SINGH Y,MOHAN S. Kinematic and dynamic performance investigations of asymmetric (U-shape fixed base) planar parallel manipulators[J]. Robotica,2018,36(8):1111-1143.
[17] 杨廷力,沈惠平,刘安心,等. 机构拓扑学理论的基本思想与数学方法——从方法论角度回顾几种原创性理论与方法[J]. 机械工程学报,2020,56(3):1-15. YANG Tingli,SHEN Huipng,LIU Anxin,et al. Basic ideas and mathematical methods of mechanism topology theory——review of several original mechanism topology theories in a methodological perspective[J]. Journal of Mechanical Engineering,2020,56(3):1-15.
[18] 黄真,刘婧芳,曾达幸. 基于约束螺旋理论的机构自由度分析的普遍方法[J]. 中国科学(E辑:技术科学),2009(1):84-93. HUANG Zhen,LIU Jingfang,ZENG Daxing. A universal approach to the analysis of the degrees of freedom of a mechanism based on the theory of constrained spirals[J]. Chinese Science (Series E:Technical Sciences),2009(1):84-93.
[19] 王飞博,陈巧红,武传宇,等. 2-UPR-SPR并联机构尺度综合[J]. 机械工程学报,2015,51(21):24-32. WANG Feibo,CHEN Qiaohong,WU Chuanyu,et al. Dimensional synthesis of a 2-UPR-SPR parallel manipulator[J]. Journal of Mechanical Engineering,2015,51(21):24-32.
[20] WANG J,WU C,LIU X J. Performance evaluation of parallel manipulators:Motion/force transmissibility and its index[J]. Mechanism and Machine Theory,2010,45(10):1462-1476.

动/静平台非一致型并联机构构型分析及设计方法

Analysis and Design Method for Non-uniform Parallel Mechanism Structure of Dynamic/Static Platform

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈凯云, 盛晨原. 多足蠕动式攀爬机器人混联机构运动特性及其工作空间[J]. 机械工程学报, 2023, 59(9): 28-39.
[2]	李照童, 杨玉维, 李彬, 赵磊, 刘凉, 马跃, 刘祺. 一种新型仿生变胞膝关节外骨骼机器人及其多体运动尺度综合方法研究[J]. 机械工程学报, 2023, 59(5): 142-155.
[3]	褚宏鹏, 祁柏, 王慧奇, 邱雪松, 周玉林. 六自由度轮式并联机器人及其构型方法[J]. 机械工程学报, 2023, 59(3): 46-53.
[4]	王成志, 王云超. 运动副间隙及受力状态对空间转向机构转向误差的影响[J]. 机械工程学报, 2022, 58(4): 240-249.
[5]	杨超, 叶伟, 陈巧红. 并联机构敏感性分析和多目标优化设计方法[J]. 机械工程学报, 2022, 58(19): 229-241.
[6]	张惠普, 汪满新. 4-RṞ(SS)₂高速并联机器人动力尺度综合[J]. 机械工程学报, 2022, 58(1): 29-40.
[7]	宋艳艳, 金国光, 畅博彦, 魏展, 李博. 基于综合性能指标的串联变胞机器人冲击性能优化[J]. 机械工程学报, 2021, 57(23): 66-76.
[8]	王森, 韩雪艳, 李浩天, 李浩然, 李仕华. 具有大承载能力的环路解耦两转动并联机构综合方法研究[J]. 机械工程学报, 2021, 57(21): 68-77.
[9]	胡建军, 刘子睿, 梅博, 彭航. 一种单行星排功率分流式混合动力系统构型优化设计方案[J]. 机械工程学报, 2021, 57(18): 264-276.
[10]	孙静, 单彦霞, 张建伟, 邵磊, 李仕华. 与串并联机构运动等效的新型并联机构综合方法研究[J]. 机械工程学报, 2021, 57(1): 1-7.
[11]	陈淼, 张氢, 陈文韬, 秦仙蓉, 孙远韬. 基于空间几何的无伴随运动并联机构分析与综合[J]. 机械工程学报, 2021, 57(1): 77-85.
[12]	朱佳龙, 黄志荣, 郑士昆, 许允斗, 段玉柱, 马小飞. 基于螺旋理论的三棱锥折展机构构型综合与组网[J]. 机械工程学报, 2020, 56(5): 29-38.
[13]	贾璞, 李端玲, 李海源, 闫晓捷, 葛正浩. 基于变胞铰链的并联机构结构设计与构型分析[J]. 机械工程学报, 2020, 56(19): 92-102.
[14]	叶伟, 谢镇涛, 李秦川. 一种可用于微创手术的并联机构运动学分析与性能优化[J]. 机械工程学报, 2020, 56(19): 103-112.
[15]	柴馨雪, 杨泳, 徐灵敏, 李秦川. 2-UPR-RPU并联机器人的动力学建模与性能分析[J]. 机械工程学报, 2020, 56(13): 110-119.