3DP工艺中STL模型中心排样策略研究

doi:10.3901/JME.2023.01.249

机械工程学报 ›› 2023, Vol. 59 ›› Issue (1): 249-258.doi: 10.3901/JME.2023.01.249

扫码分享

3DP工艺中STL模型中心排样策略研究

杨伟东^1,2, 刘志越¹, 王媛媛¹, 朱东彬¹, 张争艳^1,2

1. 河北工业大学机械工程学院天津 300401;
2. 河北工业大学国家技术创新方法与实施工具工程技术研究中心天津 300401

收稿日期:2021-12-06 修回日期:2022-08-26 出版日期:2023-01-05 发布日期:2023-03-30
通讯作者: 王媛媛(通信作者),女,1986年出生,助理研究员。主要研究方向为机电一体化E-mail:2012047@hebut.edu.cn
作者简介:杨伟东,男,1972年出生,教授。主要研究方向为增材制造,机器视觉。E-mail:yangweidong@hebut.edu.cn;刘志越,男,1997年出生,硕士研究生。主要研究方向为增材制造。E-mail:infinitely417@163.com;朱东彬,男,1975年出生,副教授。主要研究方向为增材制造。E-mail:zhudongbin@hebut.edu.cn;张争艳,男,1984年出生,副教授。主要研究方向为增材制造。E-mail:zzy@hebut.edu.cn
基金资助:
国家自然科学基金（52175313）、河北省科技重大专项（21284901Z）和国家自然科学基金青年基金（61802108）资助项目。

Research on STL Model Center Layout Strategy in 3DP Technique

YANG Weidong^1,2, LIU Zhiyue¹, WANG Yuanyuan¹, ZHU Dongbin¹, ZHANG Zhengyan^1,2

1. School of Mechanical Engineering, Hebei University of Technology, Tianjin 300401;
2. National Engineering Research Center for Technological Innovation Methods and Tool, Hebei University of Technology, Tianjin 300401

Received:2021-12-06 Revised:2022-08-26 Online:2023-01-05 Published:2023-03-30

摘要/Abstract

摘要： 针对3DP工艺中零件排样问题，由于不同零件成型方向所产生的阶梯误差存在差异，因此排样过程零件旋转受到限制。同时为了避免零件间受到粘结剂渗透影响，它们之间需预留间隙。基于粉床中心位置零件的成型质量要优于四周，提出了一种基于投影算法的STL模型中心排样策略。该方法将三维排样问题转化为二维不规则排样，以排样环作为零件的移动路径，排样点作为模型移动的参考位置，并以二维平面上的圆形空间评价排样结果，从而实现了多个零件中心排样。以两类典型的STL模型进行了三组算例的中心排样实验，结果表明：该中心排样策略对不同类型的零件均取得了较好的排样效果。

关键词: 3DP工艺, STL模型投影, 不规则排样, 排样环

Abstract: Aiming at the problem of part layout in 3DP technique, the rotation of parts in the layout process is limited due to the difference of step errors caused by different parts forming directions. At the same time, parts need to leave a gap,in order to avoid the impact of adhesive penetration between them. Based on the fact that the forming quality of the parts in the center of the powder bed is usually better than that in the surrounding areas, a central layout strategy of STL model based on projection algorithm is proposed. In this method,the three dimensional layout problem is transformed into two-dimensional irregular layout. The layout ring is used as the moving path of the parts, the layout point is used as the reference position of the model movement, and the layout result is evaluated by the circular space on the two-dimensional plane, so as to realize the center layout of multiple parts. Three groups of examples are carried out with two types of typical STL models. The results show that the central layout strategy has achieved good layout effect on different types of parts.

Key words: 3DP technique, STL model projection, irregular layout, layout circle

中图分类号:

TH164

杨伟东, 刘志越, 王媛媛, 朱东彬, 张争艳. 3DP工艺中STL模型中心排样策略研究[J]. 机械工程学报, 2023, 59(1): 249-258.

YANG Weidong, LIU Zhiyue, WANG Yuanyuan, ZHU Dongbin, ZHANG Zhengyan. Research on STL Model Center Layout Strategy in 3DP Technique[J]. Journal of Mechanical Engineering, 2023, 59(1): 249-258.

参考文献

[1] YOSSAWEE W, TSUBOUCHI T, KURISU M, et al. A semi-optimal path generation scheme for a frame articulated steering-type vehicle[J]. Advanced Robotics, 2006, 20(8):867-896.
[2] 贾志欣. 排样问题的研究现状与趋势[J].计算机辅助设计与图形学学报, 2004(7):890-897. JIA Zhixin. State-of-the-art and future trends of cutting and packing studies[J]. Journal of Computer-Aided Design & Computer Graphics, 2004(7):890-897.
[3] XU J, LIU Z, YANG C, et al. A pseudo-distance algorithm for collision detection of manipulators using convex-plane-polygons-based representation[J]. Robotics and Computer-Integrated Manufacturing, 2020, 66:101993.
[4] NI K, NING Y, YANG J, et al. Contact detection by the contact theory in 2D-DDA for arbitrary polygonal blocks[J]. Engineering Analysis with Boundary Elements, 2020, 119:203-213.
[5] SATO A K, MARTINS T C, TSUZUKI M S G. Massive parallelization accelerated solution for the 2D irregular nesting problem[J]. IFAC-PapersOnLine, 2019, 52(10):119-124.
[6] BENNELL J A, SONG X. A comprehensive and robust procedure for obtaining the nofit polygon using Minkowski sums[J]. Computers & Operations Research, 2008, 35(1):267-281.
[7] BURKE E K, HELLIER R S R, KENDALL G, et al. Complete and robust no-fit polygon generation for the irregular stock cutting problem[J]. European Journal of Operational Research, 2007, 179(1):27-49.
[8] CHEN M, WU C, TANG X, et al. An efficient deterministic heuristic algorithm for the rectangular packing problem[J]. Computers & Industrial Engineering, 2019, 137:106097.
[9] FIRAT H, ALPASLAN N. An effective approach to the two-dimensional rectangular packing problem in the manufacturing industry[J]. Computers & Industrial Engineering, 2020, 148:106687.
[10] LIU X, LIU J, CAO A, et al. HAPE3D-a new constructive algorithm for the 3D irregular packing problem[J]. Frontiers of Information Technology & Electronic Engineering, 2015, 16(5):380-390.
[11] 刘虓, 徐磊, 陈超核, 等. 改进三维不规则排样构造算法[J]. 计算机集成制造系统, 2021, 27(1):165-171. LIU Xiao, XU Lei, CHEN Chaohe, et al. Improved constructive algorithm for irregular three-dimensional packing problems[J]. Computer Integrated Manufacturing Systems, 2021, 27(1):165-171.
[12] OH Y, WITHERELL P, LU Y, et al. Nesting and scheduling problems for additive manufacturing:A taxonomy and review[J]. Additive Manufacturing, 2020, 36:101492.
[13] CHERGUI A, HADJ-HAMOU K, VIGNAT F. Production scheduling and nesting in additive manufacturing[J]. Computers & Industrial Engineering, 2018, 126:292-301.
[14] WODZIAK J R, FADEL G M, KIRSCHMAN C. A genetic algorithm for optimizing multiple part placement to reduce build time[C]//Proceedings of the Fifth International Conference on Rapid Prototyping. Dayton, OH:University of Dayton, 1994, 12:201-210.
[15] CANELLIDIS V, GIANNATSIS J, DEDOUSSIS V. Efficient parts nesting schemes for improving stereolithography utilization[J]. Computer-Aided Design, 2013, 45(5):875-886.
[16] LITVINCHEV I, PANKRATOV A, ROMANOVA T. 3D irregular packing in an optimized cuboid container[J]. IFAC-PapersOnLine, 2019, 52(13):2014-2019.
[17] ROMANOVA T, STOYAN Y, PANKRATOV A, et al. Optimal packing in additive manufacturing[J]. IFAC-PapersOnLine, 2019, 52(13):2758-2763.
[18] 张争艳, 陈萍, 杨丽, 等. 快速成型中粗糙STL模型细分算法[J]. 机械工程学报, 2016, 52(7):178-186. ZHANG Zhengyan, CHEN Ping, YANG Li, et al. Subdivision algorithm of rough STL model in Rapid Prototyping[J]. Journal of Mechanical Engineering, 2016, 52(7):178-186.
[19] WANG Y, JIA P, YANG W, et al. Simulation and experimental study of binder droplet infiltration in 3DP technology[J]. Modern Physics Letters B, 2018, 32(23):1850272.
[20] 杨伟东, 高翔宇, 刘卫胜, 等. 基于微滴喷射的3DP工艺中渗透误差补偿算法[J]. 机械工程学报, 2021, 57(21):269-278. YANG Weidong, GAO Xiangyu, LIU Weisheng, et al. The Compensation algorithm of infiltration error of the droplet injection in 3DP technique[J]. Journal of Mechanical Engineering, 2021, 57(21):269-278.

3DP工艺中STL模型中心排样策略研究

Research on STL Model Center Layout Strategy in 3DP Technique

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价