基于结晶收缩特性的连铸矩形坯成形曲线研究

doi:10.3901/JME.2022.21.285

机械工程学报 ›› 2022, Vol. 58 ›› Issue (21): 285-296.doi: 10.3901/JME.2022.21.285

扫码分享

基于结晶收缩特性的连铸矩形坯成形曲线研究

张天泽, 魏兆成, 王敏杰

大连理工大学机械工程学院大连 116024

收稿日期:2022-01-14 修回日期:2022-07-05 出版日期:2022-11-05 发布日期:2022-12-23
通讯作者: 魏兆成(通信作者),男,1981年出生,博士,副教授。主要研究方向为切削理论与技术、高质高效制造工艺。E-mail:wei_zhaocheng@dlut.edu.cn
作者简介:张天泽,男,1991年出生,博士研究生。主要研究方向为连铸金属成形与加工技术。E-mail:tianze@mail.dlut.edu.cn
基金资助:
国家自然科学基金（U1908231）、国家重点研发计划（2019YFA0705304）和中央高校基本科研业务费（DUT21LAB109）资助项目。

Research on Profile Curve of Rectangular Billets in Continuous Casting Based on Solidification and Shrinkage Characteristics

ZHANG Tianze, WEI Zhaocheng, WANG Minjie

School of Mechanical Engineering, Dalian University of Technology, Dalian 116024

Received:2022-01-14 Revised:2022-07-05 Online:2022-11-05 Published:2022-12-23

摘要/Abstract

摘要： 针对传统连铸结晶器效率低、拉坯速度慢、铸坯表面及形状缺陷等问题，设计并加工了一种高效、高速、高质（Efficient，speedy and quality，ESQ）连铸结晶器内腔形线。基于矩形坯结晶器内传热和结晶收缩行为特性，推导并建立了结晶器铜管内腔形线几何模型，运算得到形线曲线表达式和锥度表达式。根据连铸坯热交换收缩组成模型，针对高碳钢材料大矩形坯规格修正原模型及表达式，将优化结果与钢厂传统形线对比分析。依托Matlab/GUI二次开发了结晶器形线尺寸输出系统，为现有钢厂设计并加工了230 mm×170 mm断面U71Mn钢种结晶器芯棒和铜管，保持其他连铸条件基本不变，使现有连铸机拉坯速度从1.1 m/min提高至1.6～1.7 m/min。结果表明，得到的连铸坯产品表面质量与原产品相近，且并无形状缺陷，验证了模型计算的合理性和正确性。相比于传统连铸结晶器内腔形线，新形线曲线提高了结晶器的换热效率，且保证了铸坯质量，这为增加连铸坯产量提供了基础。

关键词: 连铸结晶器, 矩形坯形线, 结晶收缩, U71Mn高碳钢

Abstract: To improve the problems in traditional continuous casting mold, such as low efficiency, slow speed and defective on the surface and shape of the billet, a profile curve is designed and manufactured in continuous casting mold, which is efficient, speedy and quality (ESQ). Based on the characteristics of heat transfer and solidified shrinkage in rectangular billets mold, a geometric model of profile curve in copper mold tubes is developed. Moreover, the calculation formula about profile curve and taper curve are solved. According to the model, which is the composition of heat transfer shrinkage in continuous casting, the original model and calculation formula are modified in high-carbon steel of large rectangular billets. The results optimized are compared with traditional profile curve. Based on Matlab/GUI, the output system for profile curve in copper mold tubes is obtained with the secondary development. The copper mold tubes and mould, applied for 230 mm×170 mm U71Mn steel in continuous casting, are designed and processed for the existing steel mill. If the other continuous casting conditions remains basically, the speed of existing continuous casting machine will increase from 1.1 m/min to 1.6-1.7 m/min. The result shows that the surface quality of continuous casting billets is similar to the original and no distortion, which verifies rationality and correctness of the model calculation. Compared with the profile curve in traditional continuous casting mold, new profile curve improves heat transfer efficiency in mold and ensures processing quality of billets, which provides better technical support for increasing number of billets.

Key words: continuous casting mold, profile curve of rectangular billets, solidification and shrinkage, U71Mn high-carbon steel

中图分类号:

TG156

张天泽, 魏兆成, 王敏杰. 基于结晶收缩特性的连铸矩形坯成形曲线研究[J]. 机械工程学报, 2022, 58(21): 285-296.

ZHANG Tianze, WEI Zhaocheng, WANG Minjie. Research on Profile Curve of Rectangular Billets in Continuous Casting Based on Solidification and Shrinkage Characteristics[J]. Journal of Mechanical Engineering, 2022, 58(21): 285-296.

参考文献

[1] KROMHOUT J A, SCHIMMEL R C. Understanding mould powders for high-speed casting[J]. Ironmaking & Steelmaking, 2018, 45(3):249-256.
[2] LI C S, THOMAS B G. Thermomechanical finite-element model of shell behavior in continuous casting of steel[J]. Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science, 2004, 35(6):1151-1172.
[3] UDAYRAJ R, CHAKRABORTY S, GANGULY S, et al. Estimation of surface heat flux in continuous casting mould with limited measurement of temperature[J]. International Journal of Thermal Sciences, 2017, 118:435-447.
[4] ZHOU J, PENG X, QIN Y. A coupled thermal-mechanical analysis of a mold-billet system during continuous casting[J]. The International Journal of Advanced Manufacturing Technology, 2009, 42(5-6):421-428.
[5] ZHANG R, ZHANG Z, SHEN M. Numerical analysis of the influence of carbon content on the initial shell of continuous casting slab[J]. Ironmaking & Steelmaking, 2018, 45(8):747-754.
[6] ZHANG R, SHEN M, ZHANG Z, et al. Coupled mathematical model of thermal stress for initial shell of groove continuous casting mold[J]. Transactions of the Indian Institute of Metals, 2021, 64(2):531-544.
[7] YU S, XIE X, CHEN D, et al. Fluid flow and heat transfer behavior of liquid steel in slab mold with different corner structures. Part 2:Fluid flow heat transfer and solidification characteristics[J]. Numerical Heat Transfer, 2017, 72(8):657-668.
[8] XIE X, YU S, LIONG M, et al. Fluid flow and heat transfer behavior of liquid steel in slab mold with different corner structures. Part 1:Mathematical model and verification[J]. Numerical Heat Transfer, 2017, 72(8):642-656.
[9] SANTOS C A, SPIM J A, GARCIA A. Mathematical modeling and optimization strategies (genetic algorithm and knowledge base) applied to the continuous casting of steel[J]. Engineering Applications of Artificial Intelligence, 2003, 16(5-6):511-527.
[10] 蔡来强, 王旭东, 姚曼, 等. 连铸圆坯非均匀传热/凝固行为的无网格计算方法[J]. 金属学报, 2020, 56(08):1165-1174. CAI Laiqiang, WANG Xudong, YAO Man, et al. Meshless method for non-uniformity heat-Transfer solidification behavior of continuous casting round billet[J]. Acta Metallurgica Sinica, 2020, 56(08):1165-1174.
[11] 王旭东, 肖鹏, 尹少华, 等. 板坯结晶器传热与变形的非均匀性[J]. 机械工程学报, 2014, 50(22):28-33. WANG Xudong, XIAO Peng, YIN Shaohua, et al. Non-uniformity of mould heat transfer and distortion during wide and thick slab continuous casting[J]. Journal of Mechanical Engineering, 2014, 50(22):28-33.
[12] 盛义平, 孔祥东, 刘景元, 等. 方、圆坯高速连铸结晶器内壁的理想纵断面曲线和锥度曲线[J]. 机械工程学报, 2006, 42(12):110-115. SHENG Yiping, KONG Xiangdong, LIU Jingyuan, et al. Optimal longitudinal profile curve and taper curve of the billet and round mold for high speed continuous casting[J]. Journal of Mechanical Engineering, 2006, 42(12):110-115.
[13] 李弘英. 铸钢件的凝固和致密度的控制[M]. 北京:机械工业出版社, 1990. LI Hongying. The control of solidification and consistency of steel castings[M]. Beijing:China Machine Press, 1990.
[14] 李庆春. 铸件形成理论基础[M]. 北京:机械工业出版社, 1984. LI Qingchun. Theoretical basis of casting steel formation[M]. Beijing:China Machine Press, 1984.
[15] LAN P, LI L, TIE Z, et al. Combined study on mold taper and corner radius in bloom continuous casting by FEM simulation and trial experiment[J]. Metals and Materials International, 2019, 25(6):1603-1615.
[16] 王璞, 李少翔, 张壮, 等. 组合搅拌模式对连铸特殊钢大方坯凝固行为的影响[J]. 机械工程学报, 2020, 56(12):99-106. WANG Pu, LI Shaoxiang, ZHANG Zhuang, et al. Effect of combined stirring modes on the solidification behavior of special steel bloom casting[J]. Journal of Mechanical Engineering, 2020, 56(12):99-106.
[17] LU H, CHENG C, LI Y, et al. Flow and heat transfer of liquid slag in a continuous casting mold[J]. Journal of Iron and Steel Research International, 2019, 26(9):926-940.
[18] 金昕, 任廷志, 关杰. 新型薄板坯连铸结晶器内腔形状设计[J]. 机械工程学报. 2009, 45(11):271-276. JIN Xin, REN Tingzhi, GUAN Jie. Design of cavity shape for a new thin slab continuous casting mold[J]. Journal of Mechanical Engineering, 2009, 45(11):271-276.
[19] XING L, ZHANG Z, BAO Y, et al. Causes of corner cracks in hypoperitectic microalloyed steel billets[J]. Steel Research International, 2021, 36(24):112-125.
[20] 雷建民, 宋卫平, 崔小朝. 小方坯连铸电磁搅拌流场和温度场三维耦合数值分析[J]. 机械工程学报, 2001, 37(07):74-78. LEI Jianmin, SONG Weiping, CUI Xiaochao. 3D coupled numerical simulation for the flow field and temperature field on electromagnetic stirring in billet continuous casting[J]. Journal of Mechanical Engineering, 2001, 37(07):74-78.
[21] XU H, WWN G, SUN W, et al. Analysis of thermal behavior for beam blank continuous casting mold[J]. Journal of Iron and Steel Research International, 2010, 17(12):17-22.
[22] 魏兆成. 灯泡型连铸结晶器芯棒:中国, ZL202010741052.X[P]. 2021-05-18. WEI Zhaocheng. A mandrel of bulb-like continuous casting mold:China, ZL 202010741052.X[P]. 2021-05-18.
[23] NIU Z, CAI Z, ZHU M. Formation mechanism of a wide-face longitudinal off-corner depression during thick slab continuous casting[J]. Metallurgical and Materials Transactions B-process Metallurgy and Materials Processing Science, 2021, 52(4):2737-2752.

基于结晶收缩特性的连铸矩形坯成形曲线研究

Research on Profile Curve of Rectangular Billets in Continuous Casting Based on Solidification and Shrinkage Characteristics

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价