• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2021, Vol. 57 ›› Issue (17): 163-172.doi: 10.3901/JME.2021.17.163

• 机械动力学 • 上一篇    下一篇

扫码分享

定模动辊机电系统动力学分析

阳振峰1,2, 李强1,2, 管延智1,2, 陈晓宇1,2, 朱越坤1,2, 李傲然1,2   

  1. 1. 北方工业大学机械与材料工程学院 北京 100144;
    2. 北京市变截面辊弯成形工程技术研究中心 北京 100144
  • 收稿日期:2020-09-15 修回日期:2020-12-25 发布日期:2021-11-16
  • 通讯作者: 李强(通信作者),男,1963年出生,博士,教授,博士研究生导师。主要研究方向为机电系统动力学分析与优化。E-mail:liqiang@ncut.edu.cn
  • 作者简介:阳振峰,男,1987年出生,硕士,讲师。主要研究方向为机电装备研制、机电一体化技术。E-mail:yzf@ncut.edu.cn
  • 基金资助:
    国家自然科学基金资助项目(51775004)。

Electromechanical Dynamics Analysis of Roll-Die Forming Machine

YANG Zhenfeng1,2, LI Qiang1,2, GUAN Yanzhi1,2, CHEN Xiaoyu1,2, ZHU Yuekun1,2, LI Aoran1,2   

  1. 1. School of Mechanical and Materials Engineering, North China University of Technology, Beijing 100144;
    2. Beijing Research Center of Flexible Roll Forming Engineering, Beijing 100144
  • Received:2020-09-15 Revised:2020-12-25 Published:2021-11-16

摘要: 动力学分析对定模动辊成形装备的设计具有重要意义。论文基于能量原理,针对驱动电动机、传动机构、模具-轧辊系统与成形高强钢板材组成的机电系统,提出一种包含电磁场、机构驱动力场及高强钢板连续塑性变形过程动态能量场耦合机电系统动力学分析新方法。通过推导系统各部分能量数学表达的理论研究,获得定模动辊机电系统动力学方程。采用有限元法获取定模动辊成形过程中的反力矩,以此作为载荷并用Runge-Kutta法求解系统微分方程,揭示了驱动电动机、传动机构、模具-轧辊系统与先进高强钢板材变形组成的系统运动机理,全方位展示装备动特性规律,求得各轴载荷及电动机驱动力矩等系统性能参数,实现先进高强钢变截面定模动辊成形工况匹配设计与精确运动控制。设计的定模动辊成形机与分析结果进行了可行性实验验证。

关键词: 定模动辊, 能量原理, 机电系统, 动力学分析

Abstract: Dynamic analysis is of great significance to the design of roll-die forming machine. Aiming at the electromechanical system composed of drive motor, drive mechanism, roll-die system and formed high strength steel plate, based on the energy principle, a new dynamic analysis method of electromechanical system including electromagnetic field, driving force field of mechanism and dynamic energy field in continuous plastic deformation process of high strength steel plate is proposed. Through theoretical research, the energy mathematical expression of each part of the system is deduced, and then the electromechanical dynamics equation of the roll-die forming machine is obtained. The counter torque in the process of roll-die forming is extracted by finite element method, and be used to solve the differential equations by Runge Kutta method. The motion mechanism of the system composed of driving motor, driving mechanism, roll-die system and advanced high strength steel sheet deformation is revealed. The system performance parameters such as the load of each axis and the driving torque of the motor are obtained. The servo motion speed and acceleration of each roll show the dynamic characteristics of the equipment in an all-round way, so as to realize the performance design and accurate control for advanced high strength steel variable cross-section roll-die forming machine. The feasibility of the developed roll-die forming machine is verified by the analysis results

Key words: roll-die forming machine, energy principle, electromechanical system, dynamical analysis

中图分类号: